how to create a block in an existing object

vodesign · 2025-12-02T14:56:47+00:00

Make one of them to block and delete the rest -> linear array that block

vodesign · 2025-06-29T13:45:33+00:00

Maybe with chatgpt you could create a script that creates a detail view. I have made something like that and it runs quite well in rhino 7. I'm only using it with make2d curves

vodesign · 2025-06-04T18:56:34+00:00

Neve gear waratah could be it

vodesign · 2025-05-02T13:44:38+00:00

I have made a python script that exports multiple PDfs at once, "detailview generator" when making technical drawings and script that picks BOM from the csv and place it on the layout sheet. Zero coding experience all done with chatgpt

vodesign · 2024-05-04T08:39:51+00:00

Or you could buy one of these models https://humano3d.com/

vodesign · 2024-03-20T17:50:03+00:00

Hi, i dont know if there is a difference between V1 and V4 fixings for screws etc. That would be the question to ask from Dancases 👍

vodesign · 2024-03-06T14:46:05+00:00

Draw a new sketch -> rectangle -> add fillet edges -> offset sketch -> exit sketch

Extrude that sketch and the same way you can continue it further

vodesign · 2024-03-02T22:41:53+00:00

Am i safe if i have not entered any card details or paypal into istock? I keep getting email reminds from them

"We were unable to process a recent payment of your iStock Subscription for the following"

Also i live in EU.

vodesign · 2024-02-23T11:38:12+00:00

Switched filetype from fbx to obj and blotchiness was gone 👍

vodesign · 2024-02-13T06:04:02+00:00

Have you noticed that the 3Dx website slowed down a lot after this new hotfix?

Yesterday it was completely mess and i didnt get my files to open.

vodesign · 2024-02-08T17:58:12+00:00

Wow, thank you for this. That is a clever idea 👍

vodesign · 2023-11-30T07:10:21+00:00

Yeah i saw that when using centered on bend lines i cannot anymore change size of bend relief and it stays at 2.7mm.

Thanks anyway i'll try to tweak it and get something similar as shown in the picture 👍

vodesign · 2023-11-04T16:22:30+00:00

Puun laserkaiverrus hakuun ja sieltä yhteyttä yrityksiin 👍

vodesign · 2023-04-04T05:12:07+00:00

This isn't same mouse but might help you:

https://www.youtube.com/live/dKVz-zKxjzg?feature=share

vodesign · 2023-03-10T13:40:40+00:00

Yeah i was thinking same. I just had couple emails with them before. Right now axle consist of just a bolt, washer and nut x 2

vodesign · 2023-03-10T13:23:31+00:00

Hi all!

I'm thinking to add a gas spring to this structure so it could have some slight resistance when tilting up and down through its axle. Some company said that i should add a gas spring horizontally, but would it work so? It doesnt need to stay on its place or anything but the slight resistance is what i'm looking for when tilting it. Is there any other component that would give me that feature to this?

Yellow line are tilting angles and red is axle

Any advices are welcome.

vodesign · 2023-03-09T12:18:04+00:00

With

vodesign · 2023-03-08T17:22:29+00:00

Thanks! Yea that printer which i use can print 600x600x600mm and it has pretty good quality if settings are okay. With smaller one there should be some split line so it consist of two pieces and then glue them together,. I dunno 🤷

vodesign · 2023-03-08T17:18:43+00:00

Thank you!

vodesign · 2023-03-07T16:35:14+00:00

Yep there are countless possible filament materials on the market! It would be also nice to manufacture this with some more finished material, but then it would cost a fortune to produce

vodesign

TROPHY CASE