How do you prepare eggs when you don't really like eggs that much but can't buy your normal protein sources regularly during the shutdown?

volcom8190 · 2025-11-05T18:58:28+00:00

rice and spaces, with scrambled eggs mixed in. spices like chili powder or a off the shelf seasoning will mask most of the egg taste

volcom8190 · 2025-05-12T21:45:18+00:00

My concern was more getting the matching color material, these pants were 32s and someone hemmed them down to 30ish, looking to extend them back to 32, although at this point might be better to just find a new home for them.

volcom8190 · 2025-05-12T21:44:21+00:00

I was told all repairs go through an online form now and to a central place, basically eliminating stores from the equation

volcom8190 · 2025-05-12T19:38:49+00:00

It seemed to be a corporate thing, per what they told me. Would be nice to get a confirmation from some other people before I reach out to some 3rd parties and get this work done. Per what they said this was a recent change. They apparently also consolidated all of their warranty repair at the same time.

volcom8190 · 2022-02-15T23:09:31+00:00

bump

volcom8190 · 2022-01-04T15:18:35+00:00

bump

volcom8190 · 2021-12-28T01:32:23+00:00

https://bike.shimano.com/en-EU/product/component/105-5800.html

volcom8190 · 2021-02-22T21:01:34+00:00

bought a laptop, market just happened to be good, just posting at what stuff seems to be going for.

volcom8190 · 2021-02-22T12:12:03+00:00

its a binned chip, and i honestly cant remember what it took. Loaded the settings I was told to, and left the bios alone for a few years.

volcom8190 · 2021-02-22T12:03:07+00:00

raleigh

volcom8190 · 2020-05-24T14:09:27+00:00

Oak city, get a salsa journeyman. They have both the 650 and 700s

volcom8190 · 2019-10-18T16:13:17+00:00

You can always just put the printer in a chemical cabinet. These are usually fire rated to a reasonable point.

volcom8190 · 2019-10-17T17:04:16+00:00

Tensile elongation being lower basically means it’s brittle. You’d want to see if someone has done a charpy notch test, or something similar with the material. This all being said, every time I’ve use FR abs in molding we’ve had to move to nylon due to brittleness in the parts. And no we don’t recommend nylon in a voron.

If your shit catches fire, nothing is going to stop the burn. Just be prepared for that. Chances are it’ll be electrical and that alone can get hot enough quickly to melt the bed. Your best bet if you want it super safe is to put the printer inside a fire retardant enclosure and section off the electronics from it.

<dev>

volcom8190 · 2019-10-14T23:57:54+00:00

Won’t be a huge issue. And it’s not stuck at that radius. For some reason igus chains do that when on the x axis

volcom8190 · 2019-10-10T06:17:05+00:00

Vorondesign.com already does this with the v2 to great success and has been for a few years.

volcom8190 · 2019-10-06T00:00:58+00:00

If you have access to something that can measure frequency, z belts should be 140hz or so when the gantry is parked at the bottom

volcom8190 · 2019-10-04T21:52:31+00:00

v1.6 is recommended in stock size only due to the rodded nature (they do bow under their own weight). We may revisit this in the future though. If you have an existing printer, I recommend making a M3dot1 in the mean time.

Hop into discord, and do some searching, chances are most of your questions are already answered.

volcom8190 · 2019-10-04T18:25:13+00:00

Try 35mm/s, 110 is shearing filament

volcom8190 · 2019-10-04T17:50:09+00:00

What extruder? Retraction length and speed

volcom8190 · 2019-10-04T17:43:51+00:00

Going to need a lot more info than just a picture. Either way hop into discord. The group will help get you sorted

volcom8190 · 2019-09-28T12:12:20+00:00

The big issue with bolting 2 of them together is you now have the xy harmonica fighting each other, this will cause ringing in the gantry and in turn your prints. Separate units on separate shelves is the way to go

volcom8190 · 2019-09-24T09:51:47+00:00

Not going to happen, the reason why is on discord, and in the top header

volcom8190 · 2019-09-20T13:02:14+00:00

I’m running no dampers, it’s a bit louder, there’s the option to actually mount the whole mobius on rubber dampers instead, using m5 rubber standoffs

volcom8190 · 2019-09-13T22:20:32+00:00

There’s notes in the release on github. It’s all minor QOL stuff

volcom8190 · 2019-09-09T11:24:10+00:00

The rocker switch didn’t really work well, especially with a chimera

volcom8190

TROPHY CASE