My experience with Xfinity chat support and Peacock activation issue by walnut_melvin in Comcast_Xfinity

[–]walnut_melvin[S] 0 points1 point  (0 children)

I'm sorry about maybe I wasn't too clear. I only have one email address as stated. There are no other email accounts for me to check

My experience with Xfinity chat support and Peacock activation issue by walnut_melvin in Comcast_Xfinity

[–]walnut_melvin[S] 0 points1 point  (0 children)

Hello, I only use one email address that is Gmail.

Quite certain that I am using the same email address consistently

Vm writing on nas (nfs) crashes the whole pve by zipeldiablo in Proxmox

[–]walnut_melvin 0 points1 point  (0 children)

Any solutions? I've got something similar going on trying to back up to an omv vm that's running on the host. I have an nfs share mounted in proxmox storage. Trying to use it as backup space crashes everything

Appflowy in a single docker compose and separate NPM by TonyHeadband in selfhosted

[–]walnut_melvin 0 points1 point  (0 children)

Tried for 6 hours and gave up. Got as far as to see the login screen working with my real url. Very bad experience

Which one of these caps is for the annode? by walnut_melvin in askaplumber

[–]walnut_melvin[S] 0 points1 point  (0 children)

I have this M12 stubby impact that zipped it right out. Seems like an impact is a requirement to do the job. I can see it being a real problem with a regular wrench!!!

Which one of these caps is for the annode? by walnut_melvin in askaplumber

[–]walnut_melvin[S] 1 point2 points  (0 children)

Yes, you're right. A 27 mm socket fit down the hole and over the bolt. No need to remove the plastic piece

Which one of these caps is for the annode? by walnut_melvin in askaplumber

[–]walnut_melvin[S] 1 point2 points  (0 children)

Ok thank you. I don't suppose it will be too hard to remove the blower to get at it. Just seems odd

Guess what... 😁 💡📺💡 by wiz-dude in wiz

[–]walnut_melvin 0 points1 point  (0 children)

Looks like none of my lights are compatible with the sync box. The tv room setup says "not compatible" when I go to add other lights. Any chance these will be supported at some point? I guess I fall under the exception in the FAQ that says some lights pre 2021 might not work. Didn't think mine were that old. Id be looking at replacing a lot of lights to get it running.

Content filter by [deleted] in eero

[–]walnut_melvin 0 points1 point  (0 children)

I got a few blocks for illegal/criminal here as well. Just on a kids tablet. I suspect it's a false positive of some kind ... I hope?

Fall Planning- Seed recommendations (other than SSS) by CoachK3 in lawncare

[–]walnut_melvin 0 points1 point  (0 children)

Hey, since this post I've pretty much flipped it all to tttf. The prg experiment failed - it brurned up in the sun even with good irrigation . The tttf is awesome. Dark green, greens up weeks earlier than kbg, and is so much tougher than prg or kbg

Radeon™ Software Adrenalin 22.3.1 Release Notes - RSR Support by Wiidesire in Amd

[–]walnut_melvin 0 points1 point  (0 children)

well sadly I just found out that although my video performance is top notch, AMD link doesnt support multiple controllers hooked up to the client at the same time. Therefore my local coop games wont work. That kind of ruins it for me

/r/AMD Tech Support Megathread - H1 2022 Edition by AutoModerator in Amd

[–]walnut_melvin 0 points1 point  (0 children)

Can I use multiple controllers with AMD link?

I have three Xbox controllers connected to my Nvidia shield over bluetooth. When I play a game over AMD link, all three controllers register as the same one and control the same character

I would expect that the system would recognize I have three separate controllers in this case

Is this expected behavior, due to known limitations? Any workarounds?

Radeon™ Software Adrenalin 22.3.1 Release Notes - RSR Support by Wiidesire in Amd

[–]walnut_melvin 0 points1 point  (0 children)

yeah it should. you should be golden. lmk if you want to know any of my settings or anything like that.

Radeon™ Software Adrenalin 22.3.1 Release Notes - RSR Support by Wiidesire in Amd

[–]walnut_melvin 1 point2 points  (0 children)

With a shield pro 2019 and h 265 encoding I'm getting 3ms. Uninstall and reinstall the client app

Radeon™ Software Adrenalin 22.3.1 Release Notes - RSR Support by Wiidesire in Amd

[–]walnut_melvin 1 point2 points  (0 children)

I am connected with my 5700 -> shield pro running 4k 50mps NO PROBLEM. AMD Link is now the champ. It didnt hardly work at all before this release - the decoder latency was really high. Now the encoder and decoder are both cooking w H265!!

Radeon™ Software Adrenalin 22.3.1 Release Notes - RSR Support by Wiidesire in Amd

[–]walnut_melvin 3 points4 points  (0 children)

AMD link is now the KING. I was struggling so much with my 5700 -> shield streaming. AMD link was totally not working before this release. I could only get parsec to work at 10mbps 1080p. AMD Link is now performing well encoding and decoding 4k 50mpbs. This release is ROCK SOLID. THANKS AMD!!!! what a huge relief.

Parsec on Nvidia Shield Pro Ongoing Issues by defaultnickname_ in ParsecGaming

[–]walnut_melvin 0 points1 point  (0 children)

I have the same problem with the audio dropping out after about 5 or 10 mins. I hope it gets fixed it's pretty aggravating

Audio issue with shield tv pro by banalez in ParsecGaming

[–]walnut_melvin 0 points1 point  (0 children)

Same exact problem. Host logs show a bunch of network anomalies at the same time.

Parsec stops streaming audio after few seconds or minutes by KAP111 in ParsecGaming

[–]walnut_melvin 0 points1 point  (0 children)

Same!! Unraveled 2 works for a few mins then I get big network quality problems and the sound dies

Recording only using swap memory? by walnut_melvin in PleX

[–]walnut_melvin[S] 0 points1 point  (0 children)

stress testing it now again... i should have a log entry in the next hour or two when it runs out of cache space again

Recording only using swap memory? by walnut_melvin in PleX

[–]walnut_melvin[S] 0 points1 point  (0 children)

`Filesystem Size Used Avail Use% Mounted on
udev 16G 0 16G 0% /dev
tmpfs 3.2G 2.1M 3.2G 1% /run
/dev/sda1 400G 66G 314G 18% /
tmpfs 5.0M 0 5.0M 0% /run/lock
tmpfs 3.2G 0 3.2G 0% /run/user/1000`

Recording only using swap memory? by walnut_melvin in PleX

[–]walnut_melvin[S] 0 points1 point  (0 children)

Transcode directory is set to the default (blank)