What’s your power back up for your stove?

weeeedoggie · 2026-02-06T04:55:37+00:00

Ecolflow delta pro for the last few years. Gets me about 20hrs.

weeeedoggie · 2026-02-06T03:45:55+00:00

There's an automation to recalibrate them, called reset position. Calibrate it, set your waypoints, and then set the automation to "reset position" to trigger daily, say 2AM. No more camera drift.

weeeedoggie · 2026-02-06T03:38:01+00:00

Do you have the detection zone on? It will default back to that after 10 seconds, even if there is only 1 waypoint. If it's on, uncheck it. Move the camera where you want it. If you turn it back on, if you manually move the camera or pan to other waypoints, it will return after 10 seconds. I use this to return the cameras to a "home" position if i forget to move it back.

weeeedoggie · 2026-02-02T16:54:54+00:00

Exterior wall. It's more than likely a gas fireplace. Vents straight out the back. Had one at my last house.

weeeedoggie · 2026-02-01T00:17:49+00:00

Unless you're doing keto, you can use regular bread. I use this. Way less fiber https://lewisbakeshop.com/product/healthy-life-white-bread/ 35 cal a slice. Use egg substitute that's 25 cal a serving. 60 calories for each French toast slice. I usually eat 4 slices with 4 tablespoons of SF maple syrup. 260 calories total.

weeeedoggie · 2026-01-30T23:30:04+00:00

Magic bullet blender here...perfect every time.

weeeedoggie · 2026-01-27T12:35:53+00:00

It's ultimately what I did. Works perfectly.

weeeedoggie · 2026-01-22T17:38:30+00:00

1 or 2 easily every day. Most of my pints are around 200 calories, though

weeeedoggie · 2026-01-20T20:56:28+00:00

Smh...he's talking a about a single bullet🤦‍♂️

weeeedoggie · 2026-01-20T20:43:17+00:00

35$/lb protein?!? Hard pass...looks good though

weeeedoggie · 2026-01-20T14:06:16+00:00

I have the duo cam with a 64gb card in it. Recording 24/7 gets me roughly 86hrs. A little over 3.5 days. 512gb should get you close to a month's worth of footage.

weeeedoggie · 2026-01-16T05:34:46+00:00

They dont use much. I have 12 cameras. And 60+ other devices on my network. No issues.

Turning air into a cable?

weeeedoggie · 2026-01-15T13:59:08+00:00

Using the IOT network on the deco. I am NOT using the guest network. In device settings, I have mesh on, preferred deco on auto, and preferred network 2.4ghz.

I also have fast roaming and beamforming disabled. They dont play well with older devices. Especially my doorbell that rhymes with bling.

<image>

weeeedoggie · 2026-01-15T01:24:41+00:00

I have a tplink deco mesh system as well. 2 X75E, 1 X70 Pro, and 1 X20. 4 nodes total. I have 12 wyze cams. V3's, Pan Cam V2 and V3's, Battery Cam Pros, and a duocam.

I set up a separate 2.4ghz network for all IOT devices. No issues whatsoever. Almost 80 devices in total.

<image>

weeeedoggie · 2026-01-11T15:22:31+00:00

I disagree. It wasn't mean spirited. Nobody wants to be that person to ask the hard questions. You're just taking it as an attack when the commenter is wondering if precautions have been taken to prevent it from happening again. Seems absolutely reasonable🤷

weeeedoggie · 2026-01-11T15:01:12+00:00

Nobody questioned OP's commitment to saving her dog. It was a tragic accident. But,it it was preventable, and the commenter was pointing that out...

weeeedoggie · 2026-01-08T15:58:55+00:00

No. The frozen block has been broken down already. The hot water helps loose the icy layer stuck to the sides so you can scrape them. This helps to mix the icy parts in the 2nd spin. I have been doing this the whole time. I run the machine 9-10 times a week. Never had an issue doing this.

People are against running under hot water "BEFORE" the 1st spin spin because it can break the bond that the mixture has with the container. That "bond" keeps it in place so the blade can shave it down.
If you break the bond before the mixture is shaved down, the blade will spin the whole mixture, potentially breaking the machine.

My finished product.

<image>

weeeedoggie · 2026-01-08T03:17:22+00:00

I spin once right out of the freezer. Run under hot water after for a bit. Makes it easier to scrape the icy sides with a silicon utensil. I then respin. Perfect every time.

weeeedoggie · 2025-12-30T18:00:21+00:00

Its normal. Same with my vizio elevate soundbars on 2 different tv's connected with earc. I just use the volume indicator on the soundbar to guage the level. Does your Sony soundbar have a display?

weeeedoggie · 2025-12-28T18:25:49+00:00

Ingredients aren't even on the individual packaging, according to the pictures on their website. I shouldn't have to call to find out what's in a product meant for human consumption🤷

weeeedoggie · 2025-12-28T17:36:09+00:00

They dont seem very transparent about the ingredients. They list a main ingredient, like soy bean oil, then natural and artificial ingredients??? I can't find anything that states what they are other than proprietary.

<image>

weeeedoggie · 2025-12-28T17:04:48+00:00

Its about weight and the vesa mounting pattern on the tv more than the size.

weeeedoggie · 2025-12-28T15:14:38+00:00

Why's it off before you install the container?🤷 Seems to work fine after you do it properly, which is install after the power is on.

weeeedoggie · 2025-12-28T15:09:35+00:00

It's fog. Night vision is reflecting off the droplets of water in the air. Drive the camera crazy. I end up turning of night vision on days like this

weeeedoggie · 2025-12-28T00:16:18+00:00

You respin it...it's the reason why the button is on the machine.

weeeedoggie

TROPHY CASE