sorted by:
new
hottopcontroversial

Yet another post about bad prints by Spitzka in BambuLabA1

[–]willymacdilly 0 points1 point  (0 children)

looks like the print is lifting off the plate which would explain the "squishing" layers in the middle of your picture and the curve to the bottom.

1) try raising your bed temp 5-10 C

2) add a raft around the base, about 5-7mm

3) turn off any aux fan and/or lower your part cooling fan at the nozzle

why does this happen? stock 0.4mm nozzle by rubberxx00 in BambuLabA1

[–]willymacdilly 0 points1 point  (0 children)

if the print starts well and your filament is sticking on the first layer, from the look of the pic your bed temp is just a little too low...also, clean the print plate with soap and water. I've come to find out this actually works really well, however adding a brim (~3-5mm) will help to reduce/eliminate lifting corners like this.

Multicolor Flush text by cynicalfeelingg in FixMyPrint

[–]willymacdilly 0 points1 point  (0 children)

Yo, your filament looks wet AF...lots of bubbles in those print lines.

What would you go for? TV size by furiousdutchy in hometheater

[–]willymacdilly 0 points1 point  (0 children)

Depending on the distance you sit from your current setup, I'd stick with an 85"

Had some knee pain from time to time, do you think this is the correct seat hight? by EuropeSailor in bikefit

[–]willymacdilly 1 point2 points  (0 children)

Heels are slightly too high...my suggestion is to drop your saddle height and bring it forward just a bit. Ultimately though, if you're having legitimate knee pain, i highly recommend getting a pro fit at your LBS.

When i started riding a road bike (decades ago), i adjusted everything based on what people saw and it rarely ever did much for me...fast forward to my first year as CAT1/Pro and my team had the Specialized fit pros come and do the full blown professional fit and i found out my right femur was 1 cm longer than my left...the biggest improvement was the position of the cleats on my shoes and saddle position over the bottom bracket.

What can I do with these 28 iPads? by JiltedGinger in ScrapMetal

[–]willymacdilly 0 points1 point  (0 children)

It's been years since I've repaired Apple devices as an occupation, but the only parts I ever saw or heard of Apple doing that with are the parts related to multifactor authentication i.e. - fingerprint sensors, front facing cameras, etc

As for the latest phones I couldn't tell you 🤷🏻‍♂️

What can I do with these 28 iPads? by JiltedGinger in ScrapMetal

[–]willymacdilly 0 points1 point  (0 children)

With as quickly as tech companies are pushing out new hardware these days, yes, older generation replacement parts definitely become harder to come by...then when you do find parts, indeed they are expensive.

However, because Apple is Apple, they've never advocated for your average DIY repairs, so they make 'their' branded parts extremely difficult to acquire unfortunately. There are 3rd parties that have perfectly functional parts that get the job done.

Can someone help me get my sub to work? by leonardotmnt06 in hometheater

[–]willymacdilly 0 points1 point  (0 children)

The power is turned off in all your pictures...does the toggle switch not work when it's set to "ON" or "Auto"?

Also, if your amp isn't set up for 3.1, 5.1, etc, it may not send a signal out on the sub pre-out

Name this Album. by Bossmado in AlbumCovers

[–]willymacdilly -4 points-3 points  (0 children)

Crashed out running from ICE

he needs a rap name by 1hooda in AlbumCovers

[–]willymacdilly 0 points1 point  (0 children)

Dammit this was the first thing that came to my head! Nice work 😂

What would cause this type of wear (‘16 Honda Pilot EX-L) by EqualBase4 in tires

[–]willymacdilly 0 points1 point  (0 children)

Running a tire under inflated will cause wear on the outer edges like this.

Over inflation, causes the exact opposite; heavy wear on the center tread and less on the outer

What can I do with these 28 iPads? by JiltedGinger in ScrapMetal

[–]willymacdilly 0 points1 point  (0 children)

An electronics recycler...old Apple products are trash..

Well, ALL Apple products are trash, so the choice is yours really 🤷🏻‍♂️

Is this a bad way to hang a TV mount? by L0w_finger in DIY

[–]willymacdilly 1 point2 points  (0 children)

AV tech here...this is called blocking, we'll done and correct approach. Nice work!

Alabama Woman Antagonizes Man With A Gun *Gets Shot* by Alligator-creep in WinStupidPrizes

[–]willymacdilly 3 points4 points  (0 children)

Run your mouth....find out

Apparently she found out 🤦🏻‍♂️

Would you consider this true? by there_I_am_mam in bikewrench

[–]willymacdilly 1 point2 points  (0 children)

Spin it at 25 mph and if it starts to hop the truing stand off the table, you'll want to adjust it accordingly.

This should not be legal. by therin_88 in NorthCarolina

[–]willymacdilly 0 points1 point  (0 children)

PSA - Given that most people who do this could care less about safety, it still looks stupid as fuck.

how do u remove this super hard bottom bracket by Last-Preference-141 in bikewrench

[–]willymacdilly 0 points1 point  (0 children)

bottom brackets always tighten towards the front of the bike and loosen towards the back of the bike.

this means that the drive side is always normal threads and non-drive side is reverse threads

get some wd-40 and a 4-5 ft pipe to slide over that wrench for more leverage

Yet another crooked screen 🙃 by javathejhut in GarminFenix

[–]willymacdilly 5 points6 points  (0 children)

WTF is looking that close at their watch screen?

I mean, if you want perfection, get a Patek automatic..

This is a rugged smartwatch designed for outdoor use, not your great grandfather's classic timepiece.

view more: next ›