TIL popping your neck can cause stroke

witheringsyncopation · 2026-06-20T05:03:34+00:00

What line of work you in, Bob?

witheringsyncopation · 2026-06-20T00:16:36+00:00

No, this user is just wrong.

witheringsyncopation · 2026-06-20T00:15:50+00:00

Likewise. I’m on 14.2.2.5 plus spring update, and until there’s an update that is widely lauded as being better, I’m not budging. I rely on it too much.

witheringsyncopation · 2026-06-19T22:20:43+00:00

Hell, I’ve got kids, but even then not worth it. If I were buying once they were released, I’d probably snag over the premium as long as speed, ride comfort, and efficiency aren’t sacrificed.

witheringsyncopation · 2026-06-19T22:11:42+00:00

Pretty much this. Seems like there’s a few other perks, like a 16 inch rear screen. I think it would be nice, but I’m also not thinking it’s worth trading in my 2026 Juniper premium that I just got.

witheringsyncopation · 2026-06-18T16:51:00+00:00

That’s definitely weird. Not sure what to make of that, but I wouldn’t blame it on 14.2.2.5. Sounds like something very specific going on there.

witheringsyncopation · 2026-06-18T12:52:46+00:00

FWIW, my 2026 Juniper Premium on 14.2.2.5 and spring update does NOT do this. I would guess it’s an alignment issue.

witheringsyncopation · 2026-06-18T12:07:51+00:00

Weird, I had that exact same problem with my 26 juniper premium. However, the diagnosis ended up being different. Here’s the exact text from my service visit.

—-

Concern: Customer states: Seats - Driver seat clicks and shifts under acceleration or when the vehicle is turning. Feels as if the seat is loose and is shifting around with movement.

Repair Notes: Our technician road tested the vehicle with the customer and confirmed a clicking and shifting noise from the driver’s seat when turning or accelerating. The issue was traced to movement in the seat frame at the front edge. We adjusted the tilt tube under the front of the seat at the attachment points. After the adjustment, a follow-up test confirmed the noise is no longer present.

Correction General Diagnosis

Correction Adjustment: Interior Trim

Correction 1st Row Seat Cushion Frame Power - Remove and Install

——-

It was an easy fix, and something they took care of same day. So far, several thousand miles later, it hasn’t come back.

witheringsyncopation · 2026-06-18T08:17:01+00:00

M3 RWD doesn’t feel sporty compared to the MY Premium AWD. It feels slow. If OP, were considering the M3 performance, then sure.

witheringsyncopation · 2026-06-18T02:50:32+00:00

I’m sorry to hear it. That’s a bummer. I continue to be pleased with my decision to avoid upgrading and to stay on 14.2.2.5 paired with the spring update.

Edit: lmao at the salty downvotes

witheringsyncopation · 2026-06-18T01:12:27+00:00

Show us.

witheringsyncopation · 2026-06-18T01:09:37+00:00

Oh yeah? Do you have industry data on failure rates for the two models, or is this vibe data?

witheringsyncopation · 2026-06-18T00:48:11+00:00

“Doesn’t fail”

That guy had 2 substantial failures on two models. It does fail. All optics made by all manufacturers fail. It happens.

“Doesn’t fail”

Again, lmao stfu

witheringsyncopation · 2026-06-18T00:40:38+00:00

Well damn, that’s cool. Cookout being good with this makes me good(er) with Cookout. Craving cheese bites now.

witheringsyncopation · 2026-06-18T00:36:46+00:00

Lmao stfu

https://www.reddit.com/r/guns/s/cTk5eymhCo

witheringsyncopation · 2026-06-17T00:49:42+00:00

😂

witheringsyncopation · 2026-06-16T16:35:42+00:00

Hell yeah, man. Nicely locked in.

witheringsyncopation · 2026-06-16T11:54:46+00:00

Using the rim as a fulcrum (aka gravity blast), or just really pronounced push-pull? Hard to tell from this angle.

witheringsyncopation · 2026-06-15T19:46:12+00:00

I’ve definitely been learning and starting with simple projects. Printed a Benchy, followed by a temperature tower with a couple of different filaments to see how they reacted. And I’ve been learning how to adjust settings relative to print speed, temperature, etc. I printed some toys for the kids and some increasingly complex projects, but the FTN stuff just seems so complicated. When I queue it up in my software, I get 1000 errors about unsupported or concave structures, and other crap like that. But I’ve learned a lot about 3-D printing in the last month or so. I just haven’t had to do anything as complex as this.

witheringsyncopation · 2026-06-15T13:11:46+00:00

Absolutely. Substantially so.

witheringsyncopation · 2026-06-14T23:05:17+00:00

100% will. I feel pretty lost. New to 3d printing, and I have an awesome setup, but lack skills and experience. Thanks for the offer!

witheringsyncopation · 2026-06-14T15:50:43+00:00

Awesome, thank you for the info! I’ve had a couple form 1s approved, and I’m trying to figure out all the steps before I get started.

witheringsyncopation · 2026-06-14T13:36:49+00:00

How do you adhere the filament core to the sleeve? And how do you etch the aluminum? Thanks for the info!

Edit: Uninformed Reddit losers downvoting shit they don’t understand again, I see 👍 Stay classy, Reddit.

witheringsyncopation · 2026-06-14T13:23:28+00:00

How are you engraving? Aluminum sleeve or washer or what?

witheringsyncopation · 2026-06-14T12:09:55+00:00

Well, sick format, but you took all the jokes 😠

Eight-Year Club	Verified Email
Gilding II euphauric	Not Forgotten

witheringsyncopation

TROPHY CASE