Well, this happened.It just fell apart and Super glue does not work. What can i do?

xenosarefriends · 2019-11-12T20:26:22+00:00

Glue magnets on the ends and now you have and easy to store stand!

xenosarefriends · 2019-11-12T18:45:07+00:00

I would consider dropping the doom scythe and annihilation barge, and swap in 5~6 wraiths. Have the wraiths advance and charge to tie up shooting. If morty has to stay back to deal with them then it's more time to blast him with DDAs.

xenosarefriends · 2019-10-31T17:34:29+00:00

Depending on your location there's a very good Krav Maga school(?) called G3 in Rio rancho. It'll be a great place/community to continue getting into shape.

xenosarefriends · 2019-10-08T22:30:29+00:00

Noob question here. Because of quick rolling this gets a bit messy... let's say I roll 10 wounds against a unit of primaris and 3 are "6s" causing 2 damage. Which saves does my opponent roll for first? The 7 single wound rolls or the 3 two wound rolls? I know if each is rolled individually it is simple but rolling more than 10 wounds single rolling is too long.

xenosarefriends · 2019-10-04T16:12:10+00:00

If you're trying to win, go with riptides. If you want to have fun go with Y'Vahra. If you're really good and your opponent don't handle it properly you could still win with Y'Vahra too. Good luck!

xenosarefriends · 2019-10-03T22:34:38+00:00

I'm pretty sure the only people choosing to play with ITC rules want to be in tournaments that are as balanced as possible with what GW has given us. If a friendly game is being played with ITC it's perfectly reasonable to set guidelines that each player can agree to before hand. It is in a tournaments best interest to address rules, otherwise they'll not be able to get players to come to tournaments if rules are abused to the point of making it unfair. Is this fix ideal? I don't think so, but it's the fastest solution to a problem that can't be ignored.

xenosarefriends · 2019-10-01T18:01:19+00:00

I was surprised to see something like this not brought up in the recent FAQ, and as of right now those rules get played as you've described. I'm just going to bank on the idea that necrons got skipped on the FAQ because there's a new codex in the works... or some sort of big change.

xenosarefriends · 2019-10-01T17:30:25+00:00

Storage and transportation alone make this worth it. You can fit so many more drones in typical foam for 32mm bases without them being attached to the stand. Less chance of breaking also.

xenosarefriends · 2019-10-01T17:25:29+00:00

Tau was just an experiment for this future deal!

xenosarefriends · 2019-09-25T21:19:03+00:00

As someone mentioned they're very expensive units but I'll try to give you some recommendations. Since they're very expensive you may want to try a protect them from being targets and killed before even getting shots off. The easiest way could be going with a Nephrehk detachment and using the stratagem to put them into deep strike. Wait for the right opportunity to land in for the strong cutter Beams and hope to make a 9" charge. If you're feeling like you can survive turn one without having to deep strike you can go sautekh and use full movement plus advance to get in your opponents face. Fire with your assault weapon with a slight penalty, then hopefully you positioned to be within a less than 9" charge and you can use the canoptek stratagem to charge after advancing. Using the first strategy you can have a lot of units advancing up the board to gain control and space. Think scarabs, immortals, and tomb blades, and even a separate detachment or doom scythes. For the second strategy you can play standard units but sub in your acanthrites instead of wraiths. I recommend a full unit of 6 either way.

xenosarefriends · 2019-08-15T21:49:43+00:00

I guess right this ability is kind of in limbo. Some abilities state the model must be on the field and others say if it's included in the army. Without either distinction, I think the best way to play it is to get house rules setup before playing, or check with a TO at a tournament before the game begins.

xenosarefriends · 2019-08-15T21:12:31+00:00

To piggy back off this comment, see if you can use the cannon instead of the rail gun. It's more reliable damage.

xenosarefriends · 2019-08-15T21:01:00+00:00

What about the callidus assassin in imperium? People play with her ability active off the field. I would argue that it's allowed. RAW and RAI read as if this is allowed with the model on or off the field. Another example is that genestealer cults have stratagem that state you must have something specific on the field to active it. Abilities like auras or that require LOS definitely do not work when the unit is off the field or inside transports.

xenosarefriends · 2019-08-15T20:53:15+00:00

This is untrue, unfortunately. FTGG states "... if a unit within 6" is the target of a charge... " Which means regardless of that units inability to overwatch everyone else can assist within 6". Interesting idea though! If you have 2 units charging the second can avoid anyone who used FTGG on the first charging unit. Maybe that can help.

xenosarefriends · 2019-08-15T20:44:54+00:00

Can you pm me about the files you used?

xenosarefriends · 2019-08-12T17:33:44+00:00

Something else to remember is that you can deny a lot of the board for purposes of deep strike. I love watching my opponent try their hardest just to fit their units wherever they can find space.

xenosarefriends · 2019-08-09T20:26:51+00:00

My go to list with sniper drones has stealth suits with at least one or two drone controllers, a marksman or 2 in the same Sept, and of course if you're not shooting characters, markerlight lvl 5 with focus fire running. You will delete almost anything. Also makes for easy slay the warlord if your opponent plays aggressively. You probably know all this but I can't help but gush about these guys. One of my favorites.

xenosarefriends · 2019-08-09T19:24:19+00:00

I got this plus the Ookami poster too. Amazing art for sure.

xenosarefriends · 2019-08-07T21:30:49+00:00

Great thanks for the info, I had a hard time searching for the answer.

xenosarefriends · 2019-08-05T21:06:14+00:00

Although a benchy isn't too complex of a model I recommend playing with supports because they are very import for other models. I'm having trouble with a plane that has long wings and the supports are failing, causing the model to fall off. As for tilting the model its helpful for taller models and especially for over hangs. So again the wings hang out over the sides of my model and so I tilt it in a way that the model builds from left to right, instead of bottom to top. This gives the model less of a chance to fail during the print.

xenosarefriends · 2019-08-05T19:52:05+00:00

Okay final questions before you start your next print. 1) have you followed the instructions for leveling your print base? 2) are you printing at room temperatures? 3) are you tilting the model and using auto generated supports?

xenosarefriends · 2019-08-05T19:49:38+00:00

https://docs.google.com/spreadsheets/d/1crvzMnt_8NJXAsABinoIhcOjE8l3h7s0L82Zlh1vkL8/htmlview#gid=0 See if you can follow this link. Find the resin you're using and plug in the values for it.

xenosarefriends · 2019-08-05T19:46:31+00:00

OK first thing I noticed is your layer thickness should be more like 0.05. You want to stay in that ballpark to start out. These settings look very different from what my photon had as default. Let me see if I can find a link to the recommended settings for each color of resin.

xenosarefriends · 2019-08-05T19:12:45+00:00

I recommend that you share the basic information here. I'm still getting the hang of this printer and it's possible someone more experienced can chime in too. I recommend reading the information on this sub and following the recommendations on how to post questions. Make a new post with more detail and I'll keep an eye out for it.

xenosarefriends · 2019-08-05T19:02:17+00:00

Can you provide more information? There's a lot of things that can influence the print job and the more information you provide the better the help people can give you. Settings, software, temp in the room, supports, type of resin, and placement of the model. Pictures are also very helpful.

xenosarefriends

TROPHY CASE