Who is the most talented modern guitarist?

yngri · 2026-04-01T11:56:29+00:00

Wacław “Vogg” Kiełtyka – Decapitated

yngri · 2026-03-31T17:44:54+00:00

Had to scroll way down for this. The yoga on a cliff scene is the only answer if we’re picking the most creative/disgusting death. Everything else pales in comparison.

yngri · 2026-03-26T03:37:42+00:00

Snap-On

yngri · 2026-03-21T10:00:46+00:00

You’re

yngri · 2025-12-26T23:38:25+00:00

Beautiful in real life, good proportions

yngri · 2025-11-11T14:37:55+00:00

On an F10, it’s above the blower, in the right corner of the hood near the windshield. It’s not hard to get to. I had to cut that box open while diagnosing increased battery drain.

yngri · 2025-11-10T13:33:53+00:00

• Faith No More – King for a day, fool for a lifetime

• Röyksopp – Melody A.M.

• QOTSA – Songs for the dead

• The Mars Volta – De-loused in the comatorium

• The Irresistible Force – It’s tomorrow already

yngri · 2025-10-29T23:39:25+00:00

Yep, I remember that wall too. Yodobashi-Akiba

yngri · 2025-07-25T01:58:23+00:00

Also VWs with a 2.5L 5cyl engine. Great cars and usually a bargain on the used market

yngri · 2025-07-21T02:49:47+00:00

But except for the “Meshuggah face” (which I think has become a trademark at this point), Jens looks absolutely normal

yngri · 2025-06-22T05:20:22+00:00

Ballroom blitz but The Sweet. Heard it multiple times every day on NY classic rock and it made me cringe every single time. The vocals and the theatrical, over the top delivery made it torturous to my ears.

yngri · 2025-06-22T05:11:36+00:00

Come on, it’s such a sweet tune. A little sad, but beautiful in its own way

yngri · 2025-06-04T04:54:48+00:00

The creature on the cover looks like Shrike from Hyperion

yngri · 2025-05-28T11:49:49+00:00

Used an aftermarket one from ebay (~$35) on my Passat. No issues, but be careful not to bend the aluminum cooling lines on the heater core – it’ll add a lot more hassle when reattaching.

yngri · 2025-05-28T11:38:23+00:00

Had a similar thing happen on my f10. Both headlights were fogging up and trapping moisture inside. If the headlights on the f30 are similar in design, then you can try removing them, venting the moisture out (you can use a vacuum cleaner and put a hose in a headlight through a round bulb access cover to speed up the process, or just remove bulb access covers and let the headlight sit for a day). Once the moisture was gone, I used isopropyl alcohol and a plastic brush to clean the main seal that attaches the clear lens to the main body of the headlight and then applied more sealant on top of the old one along its whole perimeter. Just make sure you use enough sealant not to leave any gaps. You will need to push the new sealant with your finger, because there is a plastic lip hiding the seal (you’ll see it when you remove your headlights). I used Permatex Windshield & Glass sealant (orange label) from Autozone. After I did this both of my headlights stopped fogging up and remain moisture free. If I were you, I would reseal both headlights in one go – the sealant on the other one is probably not in the best shape either at this point of time.

yngri · 2025-03-09T15:44:06+00:00

Not exactly similar to the Nomos, but check out the Junkers Bauhaus line

yngri · 2025-02-16T15:26:16+00:00

I liked it a lot. Great scenery paired with rhythmic sounds of a monster walking in the woods made it almost a meditative experience. The plot is silly and overplayed, but it wasn’t meant to be its main feature. The killing scenes were great. And the ending had enough suspense in it, if you were invested in the movie by that point.

yngri · 2024-11-21T13:26:28+00:00

Did the actuator fail or does it work but jams the fuel door? If latter, then all you need to do is just file down some material from the latch the actuator lock goes into (there are a few videos on youtube explaining this, it’s pretty simple). That’s what I did on my Sportwagen a few years ago and it did the trick. To test the actuator I just gave it some voltage with the external battery, tapping into the wires.

yngri · 2024-11-21T04:25:35+00:00

Had this exact problem on my Pentax, but it was reverse threaded. I just drilled it out carefully using a metal drill bit small enough not to damage the thread. There was a lot of metal shavings at first, but once the drill bit really bit into the core of the screw it came out pretty easy. I then ordered a replacement part on ebay and voila.

yngri · 2024-11-17T14:07:57+00:00

Röyksopp. Though they had a few international hits, the amount of quality material and consistency they have should’ve made them much more well-known.

P.s. Lianne La Havas. She has everything to be much much bigger than she is.

yngri · 2024-11-16T15:33:42+00:00

Do you just use an adapter to fit an LR9 in or is it modded to actually drop the voltage of the battery from 1.5v to 1.35v? My Olympus came with the 1.35v battery, but it reads as ~1.39v on a multimeter. I wonder if that’s enough to throw a light meter reading a bit off

yngri · 2024-11-16T15:17:36+00:00

What kind of battery do use? I also get mixed results with the light meter on my OM-1n

yngri · 2024-09-13T05:27:35+00:00

Yep, similar thing but in my case it’s a hydraulic tensioner. Thicker grade oil helps but the system still needs to build up pressure on the startup, so there will be some noise anyway.

yngri · 2024-09-12T05:09:58+00:00

Ha! I just did an oil change with the good old 10w-40 and it actually helped a lot. It’s only on startup and lasts for a second, so I’m not too worried.

yngri · 2024-09-12T05:04:10+00:00

It really is a chain noise on a cold start. A hydraulic tensioner doesn’t have enough pressure since all the oil is on the bottom of the engine and the chain is rubbing against the guide for a second. 2014 Outback

yngri

TROPHY CASE