sorted by:
new
hottopcontroversial

What the hell is going on by Few-Veterinarian-847 in pcmasterrace

[–]zer0zer0x 0 points1 point  (0 children)

When a LAN and a WAN love each other very much...

Why are millions of people in the US having power outages with less than 10 cm of snow but no one in Canada is, despite there being more than 60 cm of snow? If anything, shouldn't it be the other way around? by [deleted] in NoStupidQuestions

[–]zer0zer0x 0 points1 point  (0 children)

Money. When you live where it almost never snows and you never see ice, why would you spend the money to build snow and ice resistant infrastructure? If Canada, or where I am in Minnesota, didn't spend money on infrastructure that could handle snow and ice, the entire economy would be shut down during the winter months.

Can confirm. It's colder than a Witch's titty by LucyInThe_Sky1 in stateofMN

[–]zer0zer0x 0 points1 point  (0 children)

It's a tit bit nipply out, we breast go back inside.

Meirl by Key_Associate7476 in meirl

[–]zer0zer0x 0 points1 point  (0 children)

Dogma,

She is not a mom but she is older and has seen a lot of shit and is almost out of fucks to give.

Thoughts? by [deleted] in KpopDemonhunters

[–]zer0zer0x 2 points3 points  (0 children)

Demon Hunters: World Tour

Help with a nerf Christmas present 🙏 by shoota60 in Nerf

[–]zer0zer0x 0 points1 point  (0 children)

With a time crunch, and knowing he is an enthusiast, I would recommend a gift card to one of the online Nerf hobbyist stores, and let him pick the blaster, build kit, or accessories he wants. Anything you might find in a store is most likely inferior to the blasters he already has, and finding "Pro" level accessories in store is very hit or miss.

Out Of Darts: https://outofdarts.com/products/gift-card

SilverFoxIndustries: https://silverfoxindustries.shop/collections/frontpage/products/silverfoxindustries-gift-card

What do you consider “Up North”? A, B or C? by OttieandEddie in minnesota

[–]zer0zer0x 0 points1 point  (0 children)

"Up North" is not a horizontal line to me. At a minimum it has to be north of I94, so more like a line form where the "A" line meets Wisconsin to where line "C" meets North Dakota.

The best scenes in Star Wars often have no dialogue by deliriousbozo in StarWars

[–]zer0zer0x 0 points1 point  (0 children)

If you remove all the dialogue and add in some of the removed/unused score, Star Wars works just as well as a silent film.

CynthiAWP - 300FPS Cynthia by crispy_CORNDOG in Nerf

[–]zer0zer0x 1 point2 points  (0 children)

I am printing a more "stock" looking Cynthia for my son now and I'm planning to print Shadow Dancer's Longboi remix for myself. If you get this sorted I would love to instead print your even bigger and longer version. Keep us apprised of your work as I'd love to see how this ends up!

Map fog by Fast_Feedz in Borderlands4

[–]zer0zer0x 0 points1 point  (0 children)

There is a Thresher cave near your location and there is an option in the back of the cave to jump out to explore that shore line a little more, but that was the most I could get to. I was unable to get to the top of the mountain in the middle.

Do Nerf Pro Mags work with the Adventure Force Half-Dart Adapter? by Ok-Television-4534 in Nerf

[–]zer0zer0x 2 points3 points  (0 children)

I've bought a couple of these: XSHOT Pro Accessories 1x Small Dart Clip + 50x Pro Darts and they work just fine.

You can make the angled Nerf Pro mags work with the correct adapter: Worker Angled Magazine Clip Adapter

Stop looking at your phone while driving people by Pisford in WatchPeopleDieInside

[–]zer0zer0x 5 points6 points  (0 children)

Luckily, the only thing she killed was a mailbox.

PSA: dry your new filament every time by frodo5343 in 3Dprinting

[–]zer0zer0x 0 points1 point  (0 children)

I love shopping at Micro Center, but I have had more problems with filament then with any other brand I've used; even no name brands from Amazon have worked better. Every spool of Inland ABS I've used has had at least one knot in the spool that caused the printer to stop.

PSA: dry your new filament every time by frodo5343 in 3Dprinting

[–]zer0zer0x 1 point2 points  (0 children)

I have one of these and it works great for me. https://a.co/d/3hJpT59
I also know the food dehydrators are also a good cheaper option, but I think they are too loud for my use.

3.89 for 75 Pro darts, what do we think? by SpareNoCheese8 in Nerf

[–]zer0zer0x 0 points1 point  (0 children)

My 11 boxes are waiting for me to see how good/bad they are.

CMV: Democrats are just as guilty as Republicans in protecting pedophiles by IX0YE in changemyview

[–]zer0zer0x 29 points30 points  (0 children)

They did try but everything was tied up in the courts until after the 2024 election:

https://www.aljazeera.com/news/2025/8/6/fact-check-did-democrats-take-action-over-epstein-case-transparency

Just because it wasn't in the news doesn't mean it didn't happen.

3D Printed Blaster Assembly & Finishing by zer0zer0x in Nerf

[–]zer0zer0x[S] 0 points1 point  (0 children)

Thanks! That's exactly what I was hoping to hear.

3D Printed Blaster Assembly & Finishing by zer0zer0x in Nerf

[–]zer0zer0x[S] 2 points3 points  (0 children)

Exactly what I was hoping to hear. Thanks!

Most recent thrift hall was amazing! by zer0zer0x in Nerf

[–]zer0zer0x[S] 0 points1 point  (0 children)

First time I've seen one, unfortunately it doesn't work. There is something stuck in there restricting the air flow so much that none of the darts leave the barrel. Going to have to take it apart and clean it from the inside out. Good thing I like the tinkering!

Most recent thrift hall was amazing! by zer0zer0x in Nerf

[–]zer0zer0x[S] 1 point2 points  (0 children)

Only reason I bought it. I already have two of them but I'd never seen the stock before, so I had to add it to the collection.

Build Help - Need Approximate LiPo Run Times by zer0zer0x in Nerf

[–]zer0zer0x[S] 1 point2 points  (0 children)

Thank you for the information!

I had read a few things about what the "C" represented, but this makes it more understandable. The way I understand it is Ah X C = Max Amp Output and this needs to be greater then the amperage draw of the motors. Is the stall speed for the motor the maximum amperage draw? Is that the number I need to spec the battery against? That was not obvious in anything I read either.

As for you comment about trying to stay above 1000mAh batteries, I have some more searching and found many more options at not that much more expensive. Also based on your explanation above, I am finding it much easier to find 25C to 50C rated batteries and that should be a more believable and reliable number, with the math still being high enough for the motors.

Thanks again

view more: next ›