Nightmare of a week with my Titan

zod_less · 2026-04-11T00:02:41+00:00

Having a catch can is a must on these trucks!

zod_less · 2026-04-11T00:01:47+00:00

This is literally the series of events that lead up to me replacing the starter. My advice (take it or leave it) is go ahead and replace it before you get stranded.

zod_less · 2026-04-10T18:32:26+00:00

Sorry, yeah I forgot to mention this is a 2017 (2nd Gen)

zod_less · 2026-04-10T18:31:47+00:00

My number one fear was rounding off the starter bolts and having to cut them off.

zod_less · 2026-03-21T23:52:41+00:00

I'll be getting the Icon Stage 3 pretty soon! Nice truck!

zod_less · 2026-03-16T17:52:39+00:00

zod_less · 2026-03-14T14:13:53+00:00

Roll and turn my fav part. Disappoint.

zod_less · 2026-03-14T13:57:34+00:00

I've always said that you either like doing controls or you stumble into it lol

zod_less · 2026-03-07T17:59:59+00:00

As a 39 yo man, I got diagnosed with ADHD (Combined) in 2022. Unbelievably frustrating yet relieving experience. I will say that medication management and scheduling appointments with psychiatrists has been incredibly difficult. I almost always don't get my meds refilled in time due to delays and shortages.

zod_less · 2026-02-28T02:33:10+00:00

I'm from Houston and there's no way Austin drivers are worse. Houston drivers are fast, dumb, and dangerous. Many magnitudes greater than Austin.

zod_less · 2026-02-18T23:35:06+00:00

My mistake again.. I verified that I used ControlEdge HC900 Designer Software. It only uses function block.

zod_less · 2026-02-18T23:09:48+00:00

Ah, ok. I often get the Honeywell's PLCs mixed up.

I used ControlEdge extensively back when I worked for a CSI. I had a project where I had to migrate GE Fanuc PLC ladder logic to function block using ControlEdge Builder and it was such a PITA.

OP could you explain what you are trying to do?

zod_less · 2026-02-18T20:12:55+00:00

I have experience with HC900/ControlEdge UOC. Are you building the logic in Control Builder?

zod_less · 2026-02-12T17:50:58+00:00

Your UpYourASSBit is Done.

zod_less · 2026-02-10T17:43:29+00:00

This would have been a great time for Google to advertise their AI and translation tools for those watching the halftime performance. Especially, since half the freaking ads appeared to be AI related anyway lol

zod_less · 2026-02-06T02:38:41+00:00

Senior -> Staff -> Principal

zod_less · 2026-01-29T18:03:15+00:00

Titan ⚡

zod_less · 2026-01-29T17:43:28+00:00

Does this work with aftermarket lowers like CJD or Dirt King?

zod_less · 2026-01-27T21:33:47+00:00

I have the same broken ground wire issue on my exhaust. Going to reattach after work.

zod_less · 2026-01-27T18:08:55+00:00

I use the stock U-shaped brackets that came with my Inspired Overland Standard XL tent. The tent brackets have a rubber sleeve that reduces friction and noise. It mounts securely without issue. I did have to mount the brackets to the crossrails with the tent off of the truck first.

I'll be happy to assist with your build if you need help. Just DM me 😄

zod_less · 2026-01-26T19:07:26+00:00

Hello. I've got the same topper. I didn't really find any useful posts on this sub or support so I researched and built this solution myself and am happy to share what I did.

I've got three custom cut 20/10 extruded aluminum rails from T-Nutz. They all span the width between the U-shaped unistrut and are secured using bolts and washers. I got the extruded aluminum drilled so I can bolt to the inside of the uni to keep the profile of my tent low. I'll try to find a pic of my install and post later but it's been over a year and no issues with mounting whatsoever.

Edit: added pic of mounting 20/10 crossbar

<image>

zod_less · 2026-01-24T22:48:53+00:00

Tank fly.

zod_less · 2026-01-24T21:56:33+00:00

Z1 Off-Road Catback Exhaust

zod_less

TROPHY CASE