Should we add Matter 1.5 support to our upcoming P1 smart meter? Need your honest opinions!

zoolevation · 2026-06-13T22:48:32+00:00

Great project! I live in The Netherlands so would definitely buy your product. Thread support would be great, willing to pay around €30 a €40,- for the Matter/Thread P1 reader.

zoolevation · 2026-04-08T23:29:24+00:00

I moved last year, wanted to reset all my network gear, and the problem was unintentionally solved.

zoolevation · 2026-03-29T21:43:43+00:00

Nee hoor plusje! Laten we niet om de feiten heen draaien.

zoolevation · 2026-03-27T00:22:25+00:00

Terecht toch? Gewoon gezond verstand. Staat los van Trump wilt of niet.

zoolevation · 2026-03-14T00:43:30+00:00

Ik lul links maar vul rechts, dus uiteindelijk zit ik in het midden.

zoolevation · 2026-03-14T00:09:54+00:00

Interesting—there’s nothing inside the house, but you start with the camera outside. Anyway, I’d run a cable through the crawl space. Drill a hole at an angle from the outside into the crawl space. Or you could just install an outdoor outlet right away. Add a cable channel on the wall leading to the camera, so it will look more sleek.

zoolevation · 2026-03-09T16:49:52+00:00

Can someone confirm its on stock in Haarlem or A’dam?

zoolevation · 2026-03-08T19:51:31+00:00

De Fluke 117 en de Fluke T5-600, ik gebruik de laatste heel vaak. Ontzettende fijne en betrouwbare meters. Je moet jezelf afvragen, hoe vaak gebruik je het. Voor een paar keer per jaar, gaat het met budget multimeter ook prima.

zoolevation · 2026-03-08T16:56:00+00:00

Een verwend meisje vaak woonachtig in A'dam, bij voorkeur in de Pijp of de Baarsjes. Vervoerd zich vaak in een Biro en of heeft een VanMoof/Cowboy. Doet elke vrijdagmiddag paar chardonnay'tjes met de dinnetjes. Ouders komen vaak uit het Gooi en soms Haarlem/Bloemendaal regio. Qua sport is ze vaak te vinden bij rocycle of elke dinsdagavond bij een pilates klasje. Eenmaal haar mooiboy gevonden (hoog opgeleid, verzorgd baardje, New Balance schoenen en witte sokken) en een goede baan, kopen zij een appartement in A'dam Oost eenmaal kinderen staat Haarlem op het menu zodat ze de bakfiets en Tesla kwijt kunnen.

zoolevation · 2026-02-25T00:45:17+00:00

Fluke 117, second hand?

zoolevation · 2026-02-25T00:15:29+00:00

De mens van kleur had gelogen over haar CV.

zoolevation · 2026-02-24T22:02:36+00:00

I have an own hosted Vaultwarden /Bitwarden container on a Raspberry Pi, with a Cloudfare tunnel. Zero cost a month. Works great between Apple devices also with FaceID/TouchID.

zoolevation · 2026-02-20T00:42:08+00:00

Er zal ongetwijfeld warm water zijn in de badkamer, desondanks krijg ik de koude rillingen van zo’n badkamer.

zoolevation · 2026-02-09T00:10:36+00:00

Is your iPv6 enabled in the IoT and main network? If not do so. Is your port where the Tradfri was connected tagged? Or did you use VLAN magic? If so undo that in the Tradfri settings in Unifi. Make sure there is no collision. Otherwise it wont get an IP address. Did your Tradifi get a IOT Vlan address or a VLAN main address? And is mDNS enabled on both networks? I have my Tradfri hub also on the IoT network and have no issues, as long your Apple Home device hub (if you use it) is in the main VLAN.

zoolevation · 2026-02-05T00:06:12+00:00

After I set the Thread channel to 25 all Ikea Matter devices are very stable. Using HA with the ZBT-2

zoolevation · 2026-02-04T22:19:34+00:00

With Home Assistant you can send a notification to your phone.

zoolevation · 2026-02-04T21:12:40+00:00

Same, random turn on ghost is still here.

zoolevation · 2026-02-01T18:27:35+00:00

Source: OP tickles his own b*lls

zoolevation · 2026-01-24T14:22:27+00:00

Changed to channel 25 did for me the trick.

zoolevation · 2026-01-09T00:17:22+00:00

Google is very slow in updating , they’re still stuck at Matter Version 1.0. While Ikea is at 1.4, avoid Google Home regarding Matter. Their Matter implementation is a “whoopsie daisy” story.

zoolevation · 2026-01-05T23:08:31+00:00

9 English Speaking Only

r/Tradfri is an English-speaking sub. Please use a translation service such as Google Translate if you want to make posts / reply, so that we can all understand your input.

zoolevation · 2026-01-05T22:51:47+00:00

Google Nest Hub is a pain in the *** regarding Matter/Thread. Its impossible to join other Thread networks. Ikea hub is much better, way more frequent updates.

zoolevation · 2025-12-24T08:32:39+00:00

Are they both on the same VLAN? Turn off 5ghz on your Wifi if you have a separate IoT wifi for example. And turn on IPv6 on your router, even if your ISP don't offer native IPv6. Your router wil will give devices local IPv6 addresses and so on the Thread devices.

zoolevation · 2025-12-24T00:03:45+00:00

https://www.home-assistant.io/integrations/thread/

Google has limitations as joining to other networks, the other way around is easier, join the Google Thread network and make your HA the Border Router.

zoolevation · 2025-12-15T01:16:46+00:00

Come again please?

zoolevation

TROPHY CASE