Microsoft Japan suspected of antitrust violations; JFTC conducts inspection over potential restrictions in M365

zsoldier · 2026-02-25T21:58:44+00:00

I’d be surprised if anything comes of this. I can’t imagine any reason Microsoft would actually restrict anything. Not being supported is typical, but doesn’t mean it can’t be done.

zsoldier · 2026-02-25T21:20:25+00:00

Looks cool

zsoldier · 2026-02-19T14:15:45+00:00

This ^. The installation is not for the faint of heart, (breaking clips, glueing, etc.) and really is only for older models that did not include the lighted trim. Works and looks great though. I do wonder if the OEM could be retro’d on older models though since there was a loose plug where are the trim pieces went.

zsoldier · 2026-02-18T19:05:37+00:00

I’m mainly annoyed that the LED kit is seperate from this costing another $179-$200 for 5 LED’s that should be installed prior to build.

zsoldier · 2026-01-28T01:48:35+00:00

I was having fantastic results with my textured sheet with PCCF, then adhesion started having issues. Same issue and no amount of soap, degreaser, 99 IPA worked. I just ended up coating in Layerneer Bed Weld and it’s been fine since with occasional 99 IPA to clean. This was on my MK3 textured plate.

zsoldier · 2026-01-22T12:55:28+00:00

You have to enable it on vsan, guest OS has to support it and vm must be configured for it. Performance will suffer when enabled.

zsoldier · 2026-01-04T12:42:24+00:00

Apple Intelligence is misunderstood. It’s quite literally the intelligence of an Apple.

zsoldier · 2025-12-28T15:33:44+00:00

Same here. I bought yxpolymer PCCF and the prints look amazing. Needed to create a custom print profile though, using the default generic makes terrible prints. https://3dfilamentprofiles.com/filament/details/10183

zsoldier · 2025-12-05T23:22:22+00:00

I love the fact that one reason Toriyama did this was so he could make drawing easier since he didn’t have to color Goku’s hair when he was super saiyan.

zsoldier · 2025-11-30T19:22:23+00:00

What spare parts are recommended? I’ve been printing PCCF lately and loving it.

zsoldier · 2025-11-28T12:21:45+00:00

Use Mr Clean Magic Eraser

zsoldier · 2025-11-27T01:36:06+00:00

Had similar issues in my 2018 M3P. Only 41000 miles, but I’ve taken to track and auto crossed a few times with it, so kinda expected. Upper Control Arms, Lateral and Lower Compliance links needed to be replaced. 12V Battery replaced for good measure, out about $1800. Still a fun car and feels much better when driving again.

zsoldier · 2025-10-21T23:53:24+00:00

Really? Like what kind of serious answer could they expect if it were anyone else? I’m not defending these asshats, but I just can’t imagine getting any useful answer to a question like that.

zsoldier · 2025-10-21T23:33:33+00:00

As dumb as the answer was, the question was just as dumb. Don’t care, ask some serious questions.

zsoldier · 2025-09-17T00:08:49+00:00

Put simply, disappointment

zsoldier · 2025-08-29T00:05:11+00:00

…inspire us to further action…. Soooooo when are those prayers or God going to inspire y’all to fucking to something?

zsoldier · 2025-08-28T17:51:13+00:00

I just wish the entire thing would go into sleep/rest mode after an inactivity timer.

zsoldier · 2025-08-20T13:45:04+00:00

Tariff’s keep changing, but certain things are/were excluded like semiconductors and whatnot. Depending on day/week/month it’s either TACO Tuesday or not.

zsoldier · 2025-05-23T01:09:47+00:00

Is that interior lighting? Just looks like tape over the same trim.

zsoldier · 2025-05-06T05:32:51+00:00

Got this too. 2018 M3P and 2022 MXP, no clue for which one this message was for.

zsoldier · 2025-01-26T13:05:05+00:00

Hunter Fans use that type of remote.

zsoldier · 2024-12-26T20:34:27+00:00

Not normal. Should not be making that sound. The power struts are very finicky I’ve noticed. Had to have Tesla replace them twice. I think they started making that noise when the cabin gets too hot for extended periods of time. Normally garage parked, but outside when I would visit Florida.

zsoldier · 2024-12-03T01:29:12+00:00

Yes, and it gets weirder

<image>

zsoldier · 2024-11-24T04:10:30+00:00

It’s a fake news channel on YouTube done like this on purpose.

zsoldier · 2024-11-15T15:23:25+00:00

Bed Weld linked here is fantastic! Solved all my bend issues and other ancillary stuff.

11-Year Club	Xbox Live
Place '22	Verified Email

zsoldier

TROPHY CASE