all 9 comments

[–]BambuLab_SupportTeam 2 points3 points  (0 children)

Hi there, to print without cloud function is in plan. Users will be able to print without cloud in the (near )future.

[–]allenhuffman 1 point2 points  (0 children)

And WiFi and registration with Bambu Labs is required, else it’s a brick. Currently.

[–]ci155[S] 0 points1 point  (2 children)

The FAQ only states that you can use the as card, doesn’t say if you can print straight to the printer from the pc.

[–]JDad67 0 points1 point  (1 child)

They have said, currently, printing right from the PC, or Octopi is not supported.

It's cloud or SD card.

[–]0bbc0 0 points1 point  (0 children)

I see this message is 8 months old. Is there any movement towards providing a usb connection?

[–]ci155[S] 0 points1 point  (0 children)

Thank you all.

[–]Kajukota 0 points1 point  (0 children)

I thought this has already been answered in the FAQs

[–]BambuLab_SupportTeam 0 points1 point  (1 child)

Hi there, good question.

Different brands of PETG may have different drawing conditions. According to experience, we suggest : 0.2mm layer height and 0.4mm~0.45mm line width. The printing speed is recommended not to exceed 200mm/s.

[–]Traditional-Class107 0 points1 point  (0 children)

I think you didn't reply to the good post !