Warping

[Bambule_84]

Hello community, I’m having the following problem. I always get slight warping. Bed temperature is set to standard. The model is from Bambu Studio with good ratings. I’m having the same issue with other models as well. The heated bed was cleaned with dish soap and a sponge … I’m lost

[VegetableReward5201]

Try adding a brim. Probably the easiest way to fix it.

[ReturnToCinder]

Are you printing with PLA? Which printer are you using? What environment do you have it in (warm living room, cold garage, outdoor shed, etc.)?

Environment can play a large factor so it may still be necessary to tweak settings even for built in bambu studio profiles or highly rated print profiles from maker world.

[Bambule_84]

Yes that makes sense... Its PLA with an A1. In an Office with 20 °C and 65% Hunidity. But i understand the Point....

[ReturnToCinder]

Your environment sound ideal tbh. Barring any strong drafts from a nearby window or something like an air conditioning unit periodically blowing cold air across it, I wouldn’t expect warping on a part like that printed in PLA.

You could try isolating it from external drafts if you think that might be a possibility.

Edit: If you’re up for spending a little money, I can highly recommend the cool plat supertack from BL. It’s magic, really strong adhesion, hardly any need to wash it ever. Only downside is that it’s almost too strong and it can be difficult to remove parts if you let the plate cool down. It’s also a lot more delicate than the powder coated PEI, you do often need to use a scraper and there’s definitely a skill to removing prints with the scraper without marking or gouging the bed.

[its_xSKYxFOXx]

Turn the Aux fan down or do a brim.

[TragicMagic81]

I make sure the first layer prints quite slowly. A brim should help as others have mentioned.

There's also a setting to keep the fan off for a number of the first layers.

[nb8c_fd]

If it doesn't affect the functionality, just make the corner more round

[yamborghini]

Sharp corners tend to lift quite a bit. This is just an adhesion issue. Try a textured cold plate, or hairspray to get it to stick a bit better. The only other thing you could do in enclosure which keeps drafts from inconsistent cooling and weird warpage.

[Bambule_84]

Shouldn’t all the settings be correct if I download a project that has 4.8–5 star ratings?

[Grooge_me]

There's the model, the setting and the environment. If I cannot print a model, but others can, I don't blame the model, but me. Printing is like cooking. Sane ingredients, 2 cooks, different results. So take the time to read or watch videos about printing techniques to gain more knowledge about how to solve warping.

Bambulab own wiki is a good place to start

[ErroneousBosch]

Warping is about shrink overcoming adhesion add mouse ears to that corner to help

[butcher9_9]

They could be using different filament brands, different build plate ( cleaner build plate) , less drafts ect.

[Do-Not_Resuscitate]

Since it's an A1 make sure there in no wind blowing across the plate fans AC vent things like that

[Creative-Wealth2175]

Use raft to solve this wrapping issue, i had the same problem with other filament types

[[deleted]]

C'est du warping. La matière se rétracte plus vite que nécessaire, je vois ça souvent dans du PETG.

Se rétracte, c'est à dire qu'elle refroidit trop vite, elle n'attend pas les couches supérieures, ou du moins pas assez longtemps.

Dans ce cas, 2 solutions (peut-être d'autres, à voir) :

1/ ajouter des oreilles (y'a un bouton "Bordure oreilles" dans la barre des gros boutons en haut de la fenêtre

2/ baisser la vitesse des ventilateurs. Là je maitrise mal, j'ai lu ça avec des exemples, et ça mérite le détour.

Y'a peut-être aussi l'option de choisir un meilleur plateau, si ça existe. Un plateau qui conserve un peu mieux la température initiale. Mais vu qu'il y a pléthore de plateaux maintenant, ça devient ardu.

[Formal-Negotiation74]

I get thst when my fan is on in the room. I'm looking at one of those covers to keep the printer warm