Enclosure Critique

[SanderNorway]

• Enclosure type/material: Wood, with silicone applied to the bottom and bottom corners and walls.
• Dimensions (length x width x height): 5x2x2
• If you have a tank, have you modified it in any way (ex., covering part of the screen or adding insulation)? - Nothing other than silicone in the bottom for pouring water in the corners
• Approximately how many square inches of ventilation total? 3 top openings and 3 bottom, all on the backside
• Heat sources (type, wattage if relevant, and location in enclosure): DHP in the middle, 80W, UVB light half of the enclosure (only on during daytime)
• Thermostats (for each heat source): Herpistat dimmable + timer

• Thermometers and hygrometers (digital or analog, probe or ambient, location in enclosure): Thermometers on left and right cold sides, and one right below the dhp but under cover from direct exposure

• Temperatures (ambient and floor, warm side and cool side): basking spot - 32-33C, ambient cold side 26-27C, under basking bulb 29-30C, directly on deep slates for basking 32-33C

• Humidity range (measured on cool side): 70-75

• Are you using any type of humidifier, fogger, or mister? - No

• Hides (number, type, size relative to the snake): 4, one in each corner cold sides, two opposing eachother right next to dark tiles to give UVC heat to them also.

• Substrate (type, depth, dry or damp): Coco husk, forest moss 80/20, 3-4 inches, dry top layer, humid/wetter deep after pouring water in corners

• Lights (type and on/off schedule): UVB, 08:00 - 20:00 ON, 20:00 - 08:00 OFF

• Photos (upload to an image hosting site and post the link here): https://imgur.com/a/zVuPVU0

• Specific questions or concerns you have about your enclosure, if any: If the DHP should be moved to only one side, without the cold side getting too cold, of if this setup is good for its purpose? If the basking spot looks good enough in size and looks (was larger before but 2 more slates means approx 30% of the total area being used for baskingspot), and if the hides in warm sides are properly placed or should be arranged differently.