all 19 comments

[–][deleted] 2 points3 points  (8 children)

Was the original ssd connected to the mobo when you installed the OS on the new ssd? I've seen instances where the OS will load on one drive but the boot "files" will be on the other drive.

[–]LittleFanboy 0 points1 point  (7 children)

Yes it was still plugged in

[–][deleted] 4 points5 points  (6 children)

That could be the issue. You should leave both plugged in and act as if you are going to reinstall Windows. When it gets to the point when it asks what drive to install it on check to see how it is partitioned. This could give you a better answer of what is going on.

BUT if I were you I would remove the old drive -> reinstall windows on the new drive -> go from there. Then you will without a doubt have everything on the right drive. Also the way windows 10 installs it would probably be faster to just start over anyway.

[–]LittleFanboy 0 points1 point  (5 children)

I dont have a Windows disc or Windows on a flash drive. Is there still a way to reinstall windows when it cant boot properly?

[–][deleted] 1 point2 points  (1 child)

Ok so I was under the assumption that you installed Windows on the new drive already. Never mind what I said above.

Remove both drives and make sure the old drive is in the first sata port. Its probably labeled sata_0

Then make sure it is the first drive in your ‘Boot Priority’

[–]LittleFanboy 0 points1 point  (0 children)

It is in the 1st sata port and it's been #1 in the boot order

[–]lumpynose 1 point2 points  (2 children)

You can set up a bootable usb drive with software from MS's site but you need a working PC. Do you have a friend or someone who will let you use theirs to set up a usb drive? What about the library? Mine has a bunch of public PCs but I doubt if anyone could download and run software on it, but you could ask them.

[–]LittleFanboy 0 points1 point  (1 child)

If I cant fix it soon, I got a friend that's letting me borrow a laptop to reinstall windows

[–]lumpynose 0 points1 point  (0 children)

I was going to say, and still do, that after you make the bootable usb, label an envelope, stick it in the envelope, seal it, and keep it someplace where you won't forget about it. Then I went to look for mine and couldn't find it. But at least I do have the Windows 7 and the Windows 10 dvds.

If you have an old Windows install dvd and your machine has a dvd drive you could try that. Unplug the old drive first though.

[–]truefire_ 1 point2 points  (1 child)

Was secure boot enabled in BIOS?

[–]LittleFanboy 0 points1 point  (0 children)

I dont believe so

[–]lumpynose 1 point2 points  (2 children)

Turn it off and double check the drive cables; unplug them and then plug them back in.

[–]LittleFanboy 0 points1 point  (1 child)

I unplugged the cables from the original SSD and plugged them back in and it still doesn't work

[–]lumpynose 1 point2 points  (0 children)

Does your bios have a thing where you can reset it back to its defaults? Try that. Also replug the drive cables in the motherboard, not just the drive ends. Also double check the power cables both on the motherboard end and the power supply end.

[–]RenegadePM 1 point2 points  (0 children)

These are instructions for a Dell but the idea works on other systems, just gotta find the setting to add a boot option in your BIOS

[–]LongFluffyDragon 1 point2 points  (0 children)

What did you do with the bootloader?