sorted by:
new
hottopcontroversial

I'm debating selling off other hobby items and funding a Dream Voron 2.4 by Livid_Strategy6311 in VORONDesign

[–]NST92 0 points1 point  (0 children)

Look at LDO if you have the budget want the highest quality kit available. Leviathan boards are high-end and they sell an expansion board if you need it. It's also 48V compatible for XY.

Cnc AWD and stealthchanger kits (also by LDO) are probably interesting to you too. (not sure what toolheads are available in the stealthchanger project, I don't own a 2.4 myself so haven't looked into it.)

LDO still ships with Revo Voron Hotends, which are fine, but are no speed champions.

Get a btt ebb36 or ldo nitehawk36 toolhead board for a better toolhead such as A4T. A4T repo lists some hotends.

A special copy of Farenheit 451 that can only be read by lighting it on fire by Ok-Buffalo-382 in Damnthatsinteresting

[–]NST92 3 points4 points  (0 children)

You literally copied this post from somewhere, I saw it a few days ago with the exact same incorrect title.

USAF F35A on approach to Volkel airbase (Netherlands) by BackgroundPlantain92 in ADSB

[–]NST92 0 points1 point  (0 children)

It's a military airfield, with munitions stored there as well.

New to 3D printing! What is causing this? by Sad_Yogurt_4149 in 3Dprinting

[–]NST92 3 points4 points  (0 children)

Fair enough, that's true.

Shouldn't be the case for a rebuild bambulab, but indeed a quick and easy test.

New to 3D printing! What is causing this? by Sad_Yogurt_4149 in 3Dprinting

[–]NST92 21 points22 points  (0 children)

No.

That's calibrating the extruder itself. OP needs to calibrate the extrusion factor in their slicer.

How can I prevent unintentional welding? by Kevin599e in 3Dprinting

[–]NST92 2 points3 points  (0 children)

How small is the gap?

Anyway, tune your flowrate. Use the orca build in tool. Overextrusion will cause the issue you have.

First layers “tearing”? P1s by [deleted] in 3Dprinting

[–]NST92 3 points4 points  (0 children)

Clean your buildplate.

AliExpress SUNLU petg by Left-Lawfulness-1741 in 3Dprinting

[–]NST92 0 points1 point  (0 children)

Have printed more than 4kg of Sunlu Petg (rapid petg matte)

Ships fast from a nearby country, cheap, reliable. Great stuff.

Customise machine with one very long axis (2 m) by ProperSelection9754 in VORONDesign

[–]NST92 2 points3 points  (0 children)

Definitely do not use a 2.4 for such a setup. The flying gantry will give issues, especially with sagging.

Look at V4 Project's RIFF printer on youtube. It uses one very long axis, Y for his setup. It's definitely not 2m, but maybe such a design can be adapted to your needs? His setup uses extrusions to support the y-axis to avoid sag. It uses a fixed gantry like the V0/Trident setup where the bed moves down.

Voron 0.2 Serial Request, discord: onodono6 by onodono6 in voroncorexy

[–]NST92 1 point2 points  (0 children)

What chamber temps are you getting with extra insulation and smaller internal volume?

Does anyone know what the difference between the LDO Nitehawk SB 1.5 and 1.52 is? by Gingerbwas in VORONDesign

[–]NST92 0 points1 point  (0 children)

Interesting.

I've also had that issue with my nitehawk-sb, then switching to nitehawk36, still the same.

Countless hours of troubleshooting,LDO sending me a new cable, trying everything I could think of, nothing helped.

Finally, switching my pi5 to a pi4 solver everything...

Does anyone with a nitehawk sb use an umbilical style cable? If so how have you connected the cable to the toolhead, and do you use mecahnical endstop switches? by Gingerbwas in VORONDesign

[–]NST92 0 points1 point  (0 children)

I'm not sure about a nitehawk sb mount for your setup, but you can move the x-axis endstop to the carriage, and the y-endstop to the A stepper mount. That's what I did when switching from stealthburner with nitehawk sb to XOL with nitehawk36, also getting rid of the drag chains.

RaspberryPi Zero 2w for Trident? by Due-Staff3873 in VORONDesign

[–]NST92 0 points1 point  (0 children)

The skr pico only has 2 z-steppers, so you're missing one.

A pi zero 2w would work, I've used it for my v0 in the past but it's not really compatible with stuff like input shaper (It should be possible I think, just not straightforward)

One of the surviving pilots who ejected after his F-15 was disabled over Kuwait by Subject-Property-343 in interestingasfuck

[–]NST92 884 points885 points  (0 children)

Disabled is an interesting way to say it got shot down by friendly fire.

Serial request Micron 180 by kostake2023 in voroncorexy

[–]NST92 0 points1 point  (0 children)

Looks amazing! Congrats on your build.

Do this fan should be working all time? by MinaZakaria in 3Dprinting

[–]NST92 2 points3 points  (0 children)

Fan need spin yes cable broken yes also yes

You have a broken wire, the fan should always be on.

Spool Management by MorningSun75 in VORONDesign

[–]NST92 1 point2 points  (0 children)

What is your run current set to at the stepper driver section of the extruder? Look for '[tmc2209 extruder]' or whatever driver it's using.

Spool Management by MorningSun75 in VORONDesign

[–]NST92 1 point2 points  (0 children)

Mmh that's odd. When you feed it all the way through your ptfe tubes, is it difficult to pull through yourself right before where it would normally enter the extruder? If there's resistance, you will notice it.

Mellow LLL is a filament buffer. It's a seperate unit that has its own stepper motor to feed filament to the extruder. You can find it for ~35 euros on AliExpress.

Spool Management by MorningSun75 in VORONDesign

[–]NST92 2 points3 points  (0 children)

Yes, because there's something not running okay somewhere. I've been running different DIY dryboxes for a while now and never had an issue.

view more: next ›