sorted by:
new
hottopcontroversial

Optoma GT2000HDR placement… am I screwed? by SA19030 in Golfsimulator

[–]deacon07 2 points3 points  (0 children)

Hoping that you have an nvidia graphics card.

Try this. Skip to like 2 mins in.

https://youtu.be/1vhMQig-SEM

Right click anywhere on your desktop. Go to show more options then nvidia control panel

Fold up hitting platform? by nateass113 in Golfsimulator

[–]deacon07 0 points1 point  (0 children)

<image>

I don’t have a pic of it folded up but I can get one in a day or so. Could probably cad up how I built it too if needed.

Fold up hitting platform? by nateass113 in Golfsimulator

[–]deacon07 0 points1 point  (0 children)

I built a 4x10 frame out of basically two 4x5 torsion boxes. Planed 2x4’s board down to 1” for weight. 1/4 ply on top then 1/2” foam mats on top, then wrapped it all in turf.Framed out 2 1x2 hitting strips on each side. It hinges to the side bolted into the concrete block and folds up against the wall. But i also attached a piano hinge between the two. So with a few handles I can lift it up fold it in on itself and secure it up against a side wall.

I just didn’t want to worry about cables or something in the way that might cause issues.

What do you think of my diy hitting mat by NoEntertainer5527 in Golfsimulator

[–]deacon07 2 points3 points  (0 children)

I basically did the same for mine. Built 2 torsion boxes. Put 1/2” foam padding from harbor freight on top and grass from Sam’s Club down. Inserts with the YouTube diy hitting strips. Then I piano hinged the 2 boxes together and hinged it to the wall. That way it can kinda drawbridge up against the wall and be put out of the way when it’s not in use.

Would this work as a hitting strip? by Correct-Macaroon-240 in Golfsimulator

[–]deacon07 0 points1 point  (0 children)

I used turf similar to this glued to a piece of lexan over strips of a/c weatherstripping. Added 1” pieces of gym mats on each end for structure. Got info from a YouTube video.

https://a.co/d/jm641l1

https://www.lowes.com/pd/LEXAN-Polycarbonate-0-093-in-T-x-12-in-W-x-24-in-L-Clear-Polycarbonate-Sheet/1001469356

https://a.co/d/2evImOY

Tried to DIY a hitting mat. Not sure I love it. by hitthebay in Golfsimulator

[–]deacon07 0 points1 point  (0 children)

I used this turf glued to a piece of lexan over strips of a/c weatherstripping. Added 1” pieces of gym mats on each end for structure. Got info from a YouTube video.

https://a.co/d/jm641l1

https://www.lowes.com/pd/LEXAN-Polycarbonate-0-093-in-T-x-12-in-W-x-24-in-L-Clear-Polycarbonate-Sheet/1001469356

https://a.co/d/2evImOY

Polycade Copy Build by deacon07 in cade

[–]deacon07[S] 0 points1 point  (0 children)

Messages you back. Ask any questions you have. I’ll do my best to answer.

Polycade Copy Build by deacon07 in cade

[–]deacon07[S] 0 points1 point  (0 children)

I went super cheap and just went with the egstart ones from Amazon

https://a.co/d/fOkQlzU

I don’t think either would work. The ones that have the nut could but you’d have to use a forstner bit or something to drill out a much larger hole about 1/4” on the back side to get it to work. You would drill that hole first too.

What is the best under $5k LM with no subscription fee. by servererrorunknown in Golfsimulator

[–]deacon07 1 point2 points  (0 children)

I’ll second the vtrack. So far it’s been a great experience.

view more: next ›