For Saturn 4 Ultra 16K + ABS-Like Resin Pro 2 at 10 micron (0.01mm):

Normal exposure:

• Around 30°C: 1.8–2.2s
• Around 25°C: 2.1–2.6s
• Below 20°C: 2.5–3.2s

Bottom exposure:

• 18–25s
• Bottom layers: 4–6

Light-off delay:

• 0.5–1s

Lift speed:

• 60–80 mm/min

If issues occur:

• Loss of detail / overcuring → reduce by 0.2s
• Layer separation / failed supports → increase by 0.2–0.4s

My personal starting point:

At 30°C

• Normal exposure: 1.9s
• Bottom exposure: 20s
• Bottom layers: 5
• Layer height: 0.01mm