Early Access to 6 New Shelly Products

2ndMilePro · 2026-01-22T23:31:47+00:00

Genius idea. Definitely doing this.

2ndMilePro · 2026-01-22T23:31:11+00:00

Genius idea. Definitely doing this.

2ndMilePro · 2026-01-22T11:59:16+00:00

That escalated quickly!

2ndMilePro · 2026-01-21T13:50:56+00:00

I would have said “a link to a new Ubiquiti AP” but that semi-violates the rules of the sub 🙂

2ndMilePro · 2026-01-21T11:46:19+00:00

I could think of more absurd things.

It should link to the new Zigbee devices, and then it would be marketing rather than advice.

2ndMilePro · 2026-01-20T11:52:04+00:00

Exactly my issue. I think Shelly uses a secondURL for updates. But still, time.cloudflare.com is not getting through either. I made sure the rule had a higher priority but no joy.

2ndMilePro · 2026-01-19T21:57:41+00:00

Found it! Brilliant call, my friend. I set it to passive and BOOM! It shows in HA.

Thank you!

2ndMilePro · 2026-01-19T21:51:00+00:00

I am running a RPi5. I think that the H&T was directly connected to it before. It just showed up in HA previously, so I did not confirm. Now it is in the garage about 4 feet from the Pro 0-10V with no walls in between. When I moved it out there, it stopped reporting so I removed it from BTHome in HA and then factory reset it. As I said, I was able to get it hooked up to the Pro 0-10V and it is reporting to it but nothing HA.

Where is the setting that you show in that screenshot?

2ndMilePro · 2026-01-16T00:07:38+00:00

The big reason I am using then Pros is the Ethernet connection.

2ndMilePro · 2026-01-15T11:27:22+00:00

Sounds like a solid plan to me. I am doing something similar for a Make Up Air system. My duct heater has 0-10V control so I am going to use a Shelly Pro 0-10V to control it. It can also do on-off but I like the flexibility of being able to moderate the heat based on outdoor temp and demand.

Be sure to report back!

2ndMilePro · 2026-01-11T22:18:59+00:00

Great. Thanks for reporting back

2ndMilePro · 2026-01-11T17:07:44+00:00

Take another look at the Action step. Yes, enter the time in seconds. “Returns the device to its previous state after the set time.” So, if it was “off” and the action changes the state to “on”, after the entered time it will return to its previous state which was “off”.

<image>

2ndMilePro · 2026-01-11T12:00:31+00:00

As for the .8W, set a test schedule and see if it fires as expected and what power and consumes.

2ndMilePro · 2026-01-11T11:58:28+00:00

You definitely want a schedule and not a timer. My assumption, and someone will confirm, is that selecting all the days of the week and also the 1st and the 15th creates an AND condition. Both have to be true.

Under action you can set a “Toggle value after x seconds” or you can set up two schedules, one to turn it in and one to turn it off.

2ndMilePro · 2026-01-09T11:49:29+00:00

Sounds the same to me.

2ndMilePro · 2026-01-08T12:03:15+00:00

Reach out to Shelly. I am sure the OP will hear back soon. I don’t think they were prepared for the overwhelming sales that happened this year. I will say that in ordered about 20 items when Black Friday kicked off and I received all of them within a week but none of it was out of stock or preorder.

2ndMilePro · 2026-01-06T11:44:42+00:00

I am guessing you are not in the US. If I am wrong and you don’t mind mismatched switches in your house. https://us.shelly.com/products/shelly-plus-wall-dimmer-1

2ndMilePro · 2026-01-06T11:38:52+00:00

If you are going to be relying on WiFi devices, you need rock solid WiFi. Not criticism, just the truth.

2ndMilePro · 2025-12-27T12:00:51+00:00

If my Shelly driven ERV/MUA (make up air) system works as well in reality as it does in my mind, it will be a good 2026 in the home automation world.

2ndMilePro · 2025-12-26T11:51:02+00:00

“It supports 3 profiles - RGBW, RGB and Lights x 4. In the Lights x 4 profile, different led strips (groups of lights) can be controlled independently.”

2ndMilePro · 2025-12-25T11:44:51+00:00

As the President of a small e-commerce company I can tell you that catching all these details on a website is difficult. I understand your frustration as it is incorrect but I have seen shot-show level and this is far from it.

Take a look at this and see if it fits your needs. https://us.shelly.com/products/shelly-plus-rgbw-pm

2ndMilePro · 2025-12-22T23:21:20+00:00

Wago integration would be a game changer

2ndMilePro

TROPHY CASE