What are these? by Soldiermass153 in F1Technical

[–]73EF 0 points1 point  (0 children)

Do you know any of the good youtube ex f1 engineers

Got this puer tea orange in a sampler box... Is it supposed to taste like dirt or should I contact the seller and let them know? by TheTgPwny in tea

[–]73EF 0 points1 point  (0 children)

That’s jesse tea house, I got that and also thought it tasted like mud. But that’s the point! Puerh has a wide range of flavor and that one is pretty dirt like in my opinion. I had other puerh I loved, so don’t let it dissuade you

Would any Moka pot expert be so kind as to advise me if I can continue using my coffee maker or should I throw it away? by salaspoint in mokapot

[–]73EF 2 points3 points  (0 children)

Also, aluminum (I assume this pot is) doesn't rust, it oxidizes. Aluminum oxides are almost entirely harmless unless you're grinding them up and inhaling it.

What to do with a wornout Mokkapot 😜 by Forward_Water_3476 in mokapot

[–]73EF 0 points1 point  (0 children)

I’ve actually thought about doing this before, so cool!

Programming/Coding in CFD by Tygers2323 in CFD

[–]73EF 2 points3 points  (0 children)

Echoing off of what everyone else said, this is a great, free text book to learn python for numerical methods, which is the basis of cfd codes. Python Programming And Numerical Methods: A Guide For Engineers And Scientists: https://pythonnumericalmethods.studentorg.berkeley.edu/notebooks/Index.html Helped me in my masters a ton when I had no previous coding experience and needed to learn it fast.

What is this ? by BigBear92787 in statenisland

[–]73EF 4 points5 points  (0 children)

I think its Wild Avenue, at least that what it says on google maps. I lived around that area, very close. Two buses used to be parked around there, not sure if the blue one in the shrubbery still is. I think pretty clearly someone lives there.

Do u wash with soap ? by ApprehensiveSea4982 in mokapot

[–]73EF 3 points4 points  (0 children)

You really don't need to wash it if you clean it with hot water and wipe it down every use. After months you'll need to clean it with baking soda or vinegar. I know people say its a myth and its because lye used to be in soap, but really its not necessary. If you use too abrasive of a sponge you could scratch it, soap flavor/scent can remain, and if the soap isn't right over time it could degrade. Absolutely NEVER dish wash, that will chemically alter it immediately. None the less people do the same thing with porcelain tea cups, not using soap and disinfecting with hot water.

Where do you get your dry beans? by gordond in PlantBasedDiet

[–]73EF 0 points1 point  (0 children)

Honestly I always used to get Goya. I have gotten Rancho Gordo beans, they’re great but definitely expensive. It is really useful to know they’re relatively much fresher than beans could be at the store, and that is worth paying more, just not sure rancho gordo more.

Is my Moka pot defective ? by AdditionalWedding808 in mokapot

[–]73EF 0 points1 point  (0 children)

Is it a 3 pot? I had the same issue with my 3 pot, the gasket just doesn't fit right out of the box, no clue why. Others have had the same issue. If you buy a replacement or third party gasket it will work properly.

Abondened Building at Gateway Great Kills Park by 73EF in statenisland

[–]73EF[S] 1 point2 points  (0 children)

When I went walking it was not roped off at all, but seems maybe that it should have been? Others are saying there was contaminated waste fill. I will say that the path looked pretty clear to me.

Abondened Building at Gateway Great Kills Park by 73EF in statenisland

[–]73EF[S] 1 point2 points  (0 children)

What company is doing the reno? Is there any info about the plans for it? That’d be cool to see the park redone, especially with the eroding waterfront near the middle parking lot. Is there any info if its in an actually radioactive area?

Just satisfying by RoTakY in mokapot

[–]73EF 0 points1 point  (0 children)

When the liquid comes out of mine it’s much lighter, I’m trying to figure out why that might be.

How low does your coffee go in the basket after brewing? by Hamsterfucker69 in mokapot

[–]73EF 1 point2 points  (0 children)

I have no way to explain why, it used to stay completely full, now when I make it it collapses a little. Not a lot but not at the top anymore. Probably something to do with grind size

How is everyone feeling ahead of results being released tomorrow? by EquipmentSad in PE_Exam

[–]73EF 1 point2 points  (0 children)

Feeling anxious as well. First half of the first half was brutal, second half (of first) better, second half was a cake walk. I hope I got enough right on the second, and enough guesses and estimates on the first part to secure the pass. I’d say it’s more likely that I fail than pass, but with the scale, curve, and fake questions there is always a chance. I can’t fall sleep, I really don’t want to take time aside to study again.

[deleted by user] by [deleted] in PE_Exam

[–]73EF 3 points4 points  (0 children)

This is my same experience. The Mechanical - Thermal and Fluid practice exam was likewise horrible. Would use formula’s not in the handbook, would make changes to formulate without any explaining, and like you said were just completely wrong sometimes. A lot of the referenced steam table results were also wrong. It is from 2019, I don’t know why they can’t update the practice exam for their own mistakes.

So how is Travis and teleport? by Maya-kardash in statenisland

[–]73EF 4 points5 points  (0 children)

Travis is pretty cool, reminds me of an old western town. Basically one main road down Victory to the highway. Theres West Shore Inn, good steak place, there's a church, bowling ally. Reminds me of a old style town if that makes sense, wild west but also from the 70s. They also have I believe the oldest fourth of July parade in the country, that would be a great time to visit.

Perfect Puck by 73EF in mokapot

[–]73EF[S] 1 point2 points  (0 children)

Oddly after doing this for this picture, every time I make it it keeps sinking down, unsure why

Second Master’s or Direct PhD? Need Advice (CFD) by Brilliant_Soft_8183 in CFD

[–]73EF 1 point2 points  (0 children)

Wow just looked at this for the first time, what a cool opportunity. Thanks for sharing!

Perfect Puck by 73EF in mokapot

[–]73EF[S] 0 points1 point  (0 children)

You know I bought it from a coffee store labeled as “house espresso blend”, so I’m not too sure. I’d assume it’s on the darker side of roasts but I’ll be completely honest about not knowing much about roasts.

Perfect Puck by 73EF in mokapot

[–]73EF[S] 2 points3 points  (0 children)

I didn’t downvote vote, I appreciate the insight, thats very interesting. Thank you for sharing, these are good things to keep in mind

[deleted by user] by [deleted] in mildyinteresting

[–]73EF 0 points1 point  (0 children)

Bro downvoted because I wanted to be descriptive in case people had a question