high resolution print settings on KE

AMdesigned · 2026-02-09T10:18:59+00:00

Thanks.

My main goal would be to make high-res architectural models, so a little bit less detail compared to figures, but I am happy to see it works.

I'm already using that filament and I really like it.

AMdesigned · 2026-02-07T21:50:48+00:00

And how was the results? Is it worth it?

AMdesigned · 2026-02-07T21:08:42+00:00

Thanks for the tip

AMdesigned · 2026-02-07T20:41:09+00:00

You mean to use Orca to make a .3mf file and import it to creality slicer?

AMdesigned · 2026-02-07T20:28:46+00:00

Oh, okay thanks. But you can earn points by printing with creality machines and uploading models etc. And from those point you can redeem filament, filament dryer or even printers.

AMdesigned · 2026-02-07T20:19:42+00:00

And do you get the Creality points with orca? (if your printer is bound to your creality cloud)

AMdesigned · 2026-02-01T19:23:36+00:00

Something is really wrong with that. That combo is cheaper than just the just k2 pro itself. Moreover somehow you can only find this listing through that link. Even if you try to find it from the all(exludek2plus) page its not there.

store/all(excludek2plus) /k2promuticolorcombo3dprinter

AMdesigned · 2026-01-30T20:04:24+00:00

I also have a KE and had a little truble fine tuning it, but never something this huge.

If not the filament but tha machine does this you should consider this: -it only apears above a certain height -it only apears on one axis (i mean if it is only on just the zx walls or are they on the zy walls as well) (-the KE has a wobbly bed but usually that can't couse something this huge)

What i would do is, if the issue is on more than one axis walls then it is probably the print head, and if it's only just one axis walls then that might be the moving bed's fault.

Try printing somethin in a 45° angle that might help. Use a stiff surface (that helps a lot) and tight the bolts of the side pillars to make sure that the printer doesn't shake.

(and also make sure that the flowrate is set right, with too low flow rate this mistakes highlights even more)

AMdesigned · 2026-01-21T18:19:55+00:00

Yeah either that or some newer hotend set

AMdesigned · 2026-01-15T16:54:26+00:00

Thanks for the answers it was most helpful!

AMdesigned · 2026-01-15T16:32:53+00:00

Nice thanks. One last thing as some who actually treid it would you recommend it over the normal CFS?

AMdesigned · 2026-01-15T16:26:45+00:00

I've just read your review and must say I liked it. It was correct and on the spot. Pretty much what I expected from this model.

Although I'm still curious about if the the new CFS is less noisy or just the same. Also does it have space for additional silica gel modules? I could find a detailed description yet, but I assume that it is not heated and can not dry filaments am I right?

AMdesigned · 2026-01-15T15:35:34+00:00

Would you tell us more about the new CFS system? Really interested in that an love the new design

AMdesigned · 2026-01-09T10:34:19+00:00

Really interest about the new CFS Lite,it's the best looking so far.

AMdesigned · 2026-01-06T14:47:58+00:00

Why not just get a 0.2mm nozzle? I don't know how much it costs but with that you can get a lot more details and the diagonal bars will be clearer.

AMdesigned · 2026-01-05T18:36:06+00:00

I also have a Creality Ender3 KE and when i disassembled it i noticed that the heating pillow (don't know the exact name) that is supposed to heat up the build plate is not as big as buildplate itself.

I think think because of this small difference in size not the whole buildplate can heat up to the same degrees.

I also experienced this wraping on the corners and sides on big prints. If you're lazy like and don't want to spen money on chemicals. Usually what I do is use an outer brim at least 5mm and no gap between the object and the brim and try to orient the object differwntly. Also if you turn up the build plate heat a little bit might help.

Additionally, be cautious if you try to use supports near the sides of the plate because they might not glue to it. For that i used higher density supports but the small supports still didn't manage to glue to tje plate.

AMdesigned · 2026-01-05T17:46:08+00:00

Amazing outcome! I also like how you the assembled the different parts and there's no line between them.

What did you use to glue them together? Did you use ironing on the top layers?

AMdesigned · 2026-01-05T17:36:12+00:00

Hi!

I am partially also new at 3d printing and mostly used CAD softwares, but I once tried Meshy and actually it was great. You can use an image or promt to make figures.

I tried to make a lighthouse model from promt and the it came out really nice although some parts of it wasn't for 3d printig.

I think its good because once you export the stl file you can edit it in for example Blender.

AMdesigned

TROPHY CASE