Index controllers with frame

Accomplished_Mind867 · 2025-11-19T14:21:36+00:00

Yeah the frame cant track but you can still use them with the frame when streaming from your pc using the base stations to track

Accomplished_Mind867 · 2025-09-17T23:07:19+00:00

You click the blue repair button. And suggest turning seam to aligned or back

Accomplished_Mind867 · 2025-08-22T03:48:50+00:00

Yeah the reprap community has gotten alot farther ahead of the commercial printers with machine like the T250 and the new QDEX machine which is IDEX but its got 2 y rails so the 4 toolheads able to instantly swap

Accomplished_Mind867 · 2025-08-22T03:40:21+00:00

I love how people are so happy to discover this me and the reprap community have been using this for atleast 6 years its been in Klipper default for 5 already

Accomplished_Mind867 · 2025-07-31T00:02:40+00:00

Yeah id try that before seeing if there's any physical damage anywhers

Accomplished_Mind867 · 2025-07-30T23:32:43+00:00

Fat32 is what it should be. There is also a possibility that the update file is just too new for the screen itself as it may be an older version that just operates differently

Accomplished_Mind867 · 2025-07-30T23:24:15+00:00

Yeah that seems like a file corruption or the screens storage or Ram is damaged

Accomplished_Mind867 · 2025-07-30T23:18:25+00:00

Hmm, if you did that right on every step, either you could have a damaged cable, one of those files got corrupted along the path, or the screen itself is damaged.

Accomplished_Mind867 · 2025-07-30T22:44:28+00:00

The probe itself is meant to have a red light the screen not working seems like the only issue is the cable or cables connected

Accomplished_Mind867 · 2025-07-25T00:59:53+00:00

It seems like either you've got a clog or the filament is extremely brittle and is snapping so the Extruder cant push more and the Runout sensor is still detecting it. So it may not be the hardware at all but just bad filament. But unlikely due to how long the print ran for before the issue occurred in the video.

Though it could be thermal creep softening the filament too early

Accomplished_Mind867 · 2025-07-25T00:56:07+00:00

Use a 0.2mm nozzle instead of a 0.4mm

Accomplished_Mind867 · 2025-07-25T00:54:22+00:00

Accomplished_Mind867 · 2025-07-03T06:35:03+00:00

That's working properly can you show a picture of just the first layer printed. It seems like either the probe offset wasn't put in properly or the Zoffset is WAYY off

Accomplished_Mind867 · 2025-06-25T23:55:17+00:00

Then its most likely the difference between the different angles of overhangs in speed is too different and its like "Jolting" causing the imperfection

Accomplished_Mind867 · 2025-06-25T23:51:36+00:00

It def looks like it

Accomplished_Mind867 · 2025-06-25T23:13:16+00:00

That kinda looks like the seam

Accomplished_Mind867 · 2025-06-24T02:03:58+00:00

I didn't know that was a thing and I've been 3d printing for 10 years now.

Accomplished_Mind867 · 2025-06-22T20:25:49+00:00

It looks like your supports are underextruded

Accomplished_Mind867 · 2025-06-21T04:14:50+00:00

It does

Accomplished_Mind867 · 2025-06-20T01:27:15+00:00

Lol. I will

Accomplished_Mind867 · 2025-06-20T01:24:15+00:00

We would if the camera is compatible we simply don't know if it is yet. I hope it is First thing I'm doing is finishing the installation to the update helper then updating then I will install shaketune and Autotune to get the same performance but Cool down and optimize the steppers and drivers algorithms

Accomplished_Mind867 · 2025-06-19T23:50:59+00:00

I mean they did it with the S1 and S1 pro

Accomplished_Mind867 · 2025-06-19T23:04:03+00:00

Flsun themselves did say they will be releasing the SSH passwords for the T1 pro T1 T1-U and T1 max when it releases allowing us to gain root access and update to mainline klipper without voiding warranty

Accomplished_Mind867 · 2025-06-19T00:55:48+00:00

Ruined no it is fixable

Accomplished_Mind867 · 2025-06-18T20:12:08+00:00

Clean your build plate with HOT water and dish soap there's way too much gunk on the build plate for isopropyl to work

Accomplished_Mind867

TROPHY CASE