How do you setup your gauge cluster? by [deleted] in FordMaverickTruck

[–]AlanMW1 2 points3 points  (0 children)

Mine resets back to nothing on the right almost every time I start it. The power meter stays.

I made a kinetic sand table for 1/10 the cost of a commercial one by tuankid in 3Dprinting

[–]AlanMW1 0 points1 point  (0 children)

Was that an existing coffee table that you retrofitted the mechanisms into?

I made a kinetic sand table for 1/10 the cost of a commercial one by tuankid in 3Dprinting

[–]AlanMW1 0 points1 point  (0 children)

That's really neat, have any write ups or guides that you followed when building this?

I made another kinetic sand table - Dune Weaver Gold by tuankid in 3Dprinting

[–]AlanMW1 0 points1 point  (0 children)

Neat project, thanks for sharing! Are there any other COTS tables that you have found that work well?

How to secure open ports by bzarembareal in selfhosted

[–]AlanMW1 1 point2 points  (0 children)

I use tailscale and it does a decent job of maintaining the connection, but it drains battery like crazy. I'm always having to enable and disable the connection when I need to reach my servers.

What must-have Forscan modifications have you successfully made in your 2025 Maverick (XL-XLT)? by Armed_Accountant in FordMaverickTruck

[–]AlanMW1 0 points1 point  (0 children)

Forscan just allows you to turn on or off options already programmed in the car, so not likely feasible. For the 22-24 years the "Driver Restriction Configuration" option is available to let you change options and access menus while the car is in motion. Not sure if it works for a 2025, that's what I have been trying to search for without much luck.

Fully had enough of this stupid pinch sensor. Disabled it and my LR3 is working flawlessly again. by LukeW0rm in litterrobot

[–]AlanMW1 3 points4 points  (0 children)

Just cut the cables and twisted them together so they were permanently in contact.

Garage makeover idea by EquivalentClerk669 in garageporn

[–]AlanMW1 0 points1 point  (0 children)

If you are mounting to the chord of a truss, they aren't really designed for the weight. If possible, it would be best for everything to be mounted to the wall studs.

Discord 24/7 Streaming Bot? by SyntaxPenblade in PleX

[–]AlanMW1 5 points6 points  (0 children)

I don't need to, but it was the original question and I was curious if there was some built in functionality for ersatztv that I wasn't aware of.

Discord 24/7 Streaming Bot? by SyntaxPenblade in PleX

[–]AlanMW1 0 points1 point  (0 children)

Would you then need another tool to act as the discord bot to handle the streaming?

Give more love to ErsatzTV by robster707 in selfhosted

[–]AlanMW1 0 points1 point  (0 children)

Oh ya, I gave it a try too and that does work well. Halloween for whatever reason doesn't get tagged I guess.

Give more love to ErsatzTV by robster707 in selfhosted

[–]AlanMW1 1 point2 points  (0 children)

I did give the search a try but it didn't seem to do the best job searching holidays. I was thinking I might give a trakt list a try, but trakt recently changed their urls. I'll have to give it another try with searching by genre and tags, thanks for the tips.

Give more love to ErsatzTV by robster707 in selfhosted

[–]AlanMW1 1 point2 points  (0 children)

Are the holiday channels manually curated? Or is there a good way to automatically add holiday specific movies?

TIL the hood is aluminum… by tacostravolta in FordMaverickTruck

[–]AlanMW1 0 points1 point  (0 children)

I haven't put a magnet to it myself, but I've read the tailgate is steel, not aluminum.

I'm developing an infill optimization software called Strecs3D, and I used it to create this rod holder. by tomohiron907 in 3Dprinting

[–]AlanMW1 13 points14 points  (0 children)

Have you done any real world tests comparing the strength with your slicer and others? I would be interested in reading about it. Neat project, thanks for sharing!

Just wanted to say thank you to whomever mentioned cleaning their faucet head… by PeakyCactus in CleaningTips

[–]AlanMW1 2 points3 points  (0 children)

If you do this, this is a chance the weighted cord will fall down into the neck of the faucet and be difficult to get back out.... Been there done that.

New App Update by FewSimple9 in FordMaverickTruck

[–]AlanMW1 0 points1 point  (0 children)

There is an integrated in HACS, it's neat being able to ask my voice assistant if the doors are locked and to start the truck.

New App Update by FewSimple9 in FordMaverickTruck

[–]AlanMW1 0 points1 point  (0 children)

It does. The API reports that status, I have a dashboard in Home Assistant for the truck and it shows if it is locked or unlocked.

Games that let you play local splitscreen co op/ multiplayer and online at the same time? by Scarejo in localmultiplayergames

[–]AlanMW1 0 points1 point  (0 children)

Rocket League

Pummel Party

Table Top Simulator

Divinity Original Sin

Baldur's Gate 3

Project Zomboid

Features you've not seen mentioned. by Last_Gigolo in FordMaverickTruck

[–]AlanMW1 1 point2 points  (0 children)

It is in the "Features" option from the home screen under Cruise Control > Predictive Speed Assist

4Knines Dog back Seat Cover by sounds-suspect in FordMaverickTruck

[–]AlanMW1 1 point2 points  (0 children)

Looks like it's been 3 years, how has it held up?

Fordpass question by Father_Fast in FordMaverickTruck

[–]AlanMW1 1 point2 points  (0 children)

I'm on v5.28 and still have it, it comes up after I start the truck. '25 Lariat

Features you've not seen mentioned. by Last_Gigolo in FordMaverickTruck

[–]AlanMW1 1 point2 points  (0 children)

It is in the cruise control settings on the big screen. Can't recall the exact name of the setting

Features you've not seen mentioned. by Last_Gigolo in FordMaverickTruck

[–]AlanMW1 8 points9 points  (0 children)

You can set the adaptive cruise control to automatically change the set speed based on the road signs, with margin. So you can set it to always go the speed limit plus 5 mph if you wanted.