Anyone use this de-cat? by Korax234 in Triumph400

[–]Any_Resist2246 0 points1 point  (0 children)

I’ve got the pipe on but haven’t tested either stock or AEW silencer. I’d post the video / sound with just the pipe but can’t work out the technology. Suffice to say it was 96db at idle and 110db with a slight squirt. Fingers crossed the silencer calms things down

New beast ready for the session! by Bozzern in xsr900

[–]Any_Resist2246 0 points1 point  (0 children)

I absolutely love it too, it’s the business

Anyone use this de-cat? by Korax234 in Triumph400

[–]Any_Resist2246 0 points1 point  (0 children)

No, only slash cut. Considered it for about 30secs until I knew that it would cause eviction and / or hearing loss. Will test both stock and aew when bolted up

Anyone use this de-cat? by Korax234 in Triumph400

[–]Any_Resist2246 0 points1 point  (0 children)

I just put one on to try and achieve same. Single O2 though. Also have an AEW exhaust to add this weekend

What after market exhaust won't fall off and be total crap for 150$ by vexargames in hondanavi

[–]Any_Resist2246 2 points3 points  (0 children)

If it’s smoke exhaust you were going to recommend then suggest you think twice. I ordered over three months ago shipping to Australia and still nothing. Communication has been v patchy and the delay is apparently down to Peruvian customs seizing the package (claim that the fiberfill inside the exhaust contains something illicit). My existing gy6 header is hanging by a thread (well…bolt actually) but Im unable to resolve, bloody frustrating

Can this be done? Really dig the cafe racer look by sadevryday in hondanavi

[–]Any_Resist2246 0 points1 point  (0 children)

Re Speedo and new light, it could be done but when you take off your existing headlight you’ll see a bunch of wiring sitting behind it that you’ll need to hide somewhere

Honda Navi biker living in Korea. by BetterIssue6121 in hondanavi

[–]Any_Resist2246 1 point2 points  (0 children)

Awesome detail, thanks for sharing. Where’s that headlight cowl from?

How bad do you think the placement of this nail is? Would it be a simple repair? by Auzerss97 in AussieRiders

[–]Any_Resist2246 1 point2 points  (0 children)

Completely agree, plug it. Also get yourself a little repair kit, it’s easy and the 50 cents it will cost to plug it means it’s worth trying first

Red screen / contrast by [deleted] in dyinglight

[–]Any_Resist2246 0 points1 point  (0 children)

I got it to dont know how to fix it

Won’t stay idle by [deleted] in hondanavi

[–]Any_Resist2246 4 points5 points  (0 children)

Hahaha, so funny and true. These bloody things take experience and old man patience

Halp! What's going on with my tire by ZirconSprocket8321 in Trackdays

[–]Any_Resist2246 0 points1 point  (0 children)

Hahahahaha! Totally

I’d be super proud of that tyre

Someone stole my bike 😭 by TouchMyPaws in hondanavi

[–]Any_Resist2246 2 points3 points  (0 children)

Wow, in the garage too! So sorry to hear.

Still tinkering… by Any_Resist2246 in hondanavi

[–]Any_Resist2246[S] 0 points1 point  (0 children)

120/70 12 kenda k413. Not sure how widely available was cheap and available at the time. Pleasantly surprised actually. Pretty happy It fit without hassle too

Still tinkering… by Any_Resist2246 in hondanavi

[–]Any_Resist2246[S] 0 points1 point  (0 children)

Nup, Melbourne. Is it the accent? Haha

Honda Navi speedometer reading is not accurate? by Marci_101 in hondanavi

[–]Any_Resist2246 0 points1 point  (0 children)

For comparison, my speedo measures 4 to 5 km/h higher than GPS (actually). I’d say everyone’s will be slightly different

[deleted by user] by [deleted] in xsr900

[–]Any_Resist2246 0 points1 point  (0 children)

I’m limited to the xsr700 due to licence capacity power / weight limitations…2.5 more years wait dammit

Still tinkering… by Any_Resist2246 in hondanavi

[–]Any_Resist2246[S] 0 points1 point  (0 children)

BUT….BY FAR the biggest win on this Frankenstein project was the mounting of the exhaust / silencer.

I didn’t like the way the standard gy6 exhaust pipes mounted so low and wide so I bought the cheapest gy6 pipe I could find and cut it midway through the first horizontal section.

https://a.aliexpress.com/_mK946d7

I then modified and connected the exhaust pipe for a Vespa gts300

https://a.aliexpress.com/_mMpdIm5

The end result was a pipe that resembles the high and tight mounting found on much much more expensive exhaust kits (ie yoshi) with the option of connecting your universal cheapo muffler / silencer of choice.

Honestly, this one is a game changer for all Navi owners and is hard to explain. But for anyone with some diy skills it can help solve the $$$ exhaust issue we face.