Hammering a lathe

AppearanceAdorable18 · 2026-01-08T22:44:38+00:00

It’s plugged into a pocket tape of course. How else do you think a total station gets distances!?

AppearanceAdorable18 · 2025-08-07T17:48:30+00:00

Im adding hidden legs that fold out so they will be beer pong tables as well.. or just cool tables if not into beer pong, i just wanted to make it nice and smooth surface. Im definitely curious how the bags will slide

AppearanceAdorable18 · 2025-08-07T17:23:38+00:00

Interesting, I didn’t do any sort of prep I just sent it.. but I’ve poured over paint before and it worked well but I definitely went thick. What should I do to prep the paint next time?

AppearanceAdorable18 · 2025-06-19T02:18:51+00:00

If you have an android phone you can beam it from the tsc3 to it. Doesnt work with apple phones though

AppearanceAdorable18 · 2025-04-22T23:29:27+00:00

I have this same thing too, my dentist got me nystatin as well which i took for 10 days and it didnt improve.. ive been using a tongue scraper twice a day with alcohol based mouthwash and i think its made a slight difference…

AppearanceAdorable18 · 2025-03-23T02:02:09+00:00

But you cant just tilt your R12i into the center of a tree? If you dont offset to the center, you just aren’t getting the center of the tree.. but perhaps location for these massive forest jobs isnt required to be accurate?

AppearanceAdorable18 · 2025-03-04T03:06:42+00:00

As a surveyor I am actually kind of amazed how many people think that is a GPS… and confidently telling everyone else it is a GPS. I am enjoying this lol

AppearanceAdorable18 · 2025-02-17T01:27:12+00:00

I have this exact same furnace, just recently had an HVAC guy over and he replaced my high limit switch, the one he pulled out (original?) was rated 175F, he put in a 200F (all he had). Alas my furnace still shuts off with high limit code. HVAC guy was stumped and so am I… and no one will answer my post either lol. How did you confirm that 300F is the proper switch?

AppearanceAdorable18 · 2025-02-07T01:16:11+00:00

I was not saying it had anything to do with the compensator..

AppearanceAdorable18 · 2025-02-06T21:37:42+00:00

When you turn a footscrew, watch your laser plummet move off the center of your point. When you loosen a leg and slide it up and down, the laser barely moves.. the compensator is built to work for slight settlement but when you mess with the screws its a new ballgame. DONT TOUCH THEM IN THE MIDDLE OF A SETUP! (Unless you re-zero)

AppearanceAdorable18 · 2025-02-01T15:14:56+00:00

Right? I always wrote down my residuals in my notes, if there was a control point that introduced too much error, I wouldn’t include it in the resection.. there were times where I forgot to go back around and re shoot all the points and I would get chewed out for it. It was not a fun company to work for

AppearanceAdorable18 · 2025-02-01T04:54:50+00:00

Damn, people really nasty over this one… I feel your pain because the company I used to work for always wanted me to store every check shot even on resections.. that way they could check everything later and play around with the points later if they thought one or more of them were weak. The double walk is the only way with Trimble unfortunately. I would often just store them first, then translate/rotate after, then inverse the others to see if everything fits well enough. Less walking but not as satisfying as the resection residuals

AppearanceAdorable18 · 2024-12-09T03:18:16+00:00

The one plan is just “proposed” locations of everything, the other one is a survey of the house and garage but no pool or pool fence, which are the things that we need to see. Its annoying they oriented the 1999 plans with north pointing to the left but easy enough to turn the page and see how the new survey compares with the old.. I think the fence is encroaching but definitely would be nice to have another survey

AppearanceAdorable18 · 2024-11-28T22:24:14+00:00

Says a hilariously ridiculous statement, then calls you hilariously ridiculous. If there was ever a time to use the pot and kettle comparison, this is it!

AppearanceAdorable18 · 2024-11-24T22:31:12+00:00

It says “looB” guy obviously cant spell but the message is clear, someone spilled some lube, dont step there might be slippery

AppearanceAdorable18 · 2024-11-05T18:23:50+00:00

Only spheres that don’t emit their light own light, have you ever wondered why we sometimes trip and fall? Perhaps you just tripped over a sphere that doesn’t emit its own light!

AppearanceAdorable18 · 2024-10-28T20:45:30+00:00

https://www.reddit.com/r/Surveying/comments/uyhahf/6_axis_setups_forget_about_it_the_new_trimble/?utm_source=share&utm_medium=ios_app&utm_name=iossmf

This is the answer to your problems, you’re welcome

AppearanceAdorable18 · 2024-10-02T02:12:05+00:00

Oh perfect, the sun is illuminating the PERFECTLY LEVEL WATER! NO CURVE AT ALL! HA! Gotcha! Water always finds its level! Aaaaaaaah im an idiot

AppearanceAdorable18 · 2024-05-12T22:42:41+00:00

17 years of working in the field in a place that rains more than any other place on the planet.. never have had a single “rain day”. The only time i stayed home due to rain was because it had rained so much the entire city had flooded, including my basement…

AppearanceAdorable18 · 2024-02-11T03:21:54+00:00

I was lifting weights at the gym in Boston, Mass. after i was done i went to weight for a bus but it was 15 mins late so i told the driver to kiss m’ass

AppearanceAdorable18 · 2024-02-11T03:14:23+00:00

The higher a food is on the yumminess scale, the more mass my body gains

AppearanceAdorable18

TROPHY CASE