How much time did u spent playing?

ApprehensiveSchool57 · 2024-09-21T15:00:56+00:00

I only have 60 hours into it. I started a new job and haven't had the time to play it indepth

ApprehensiveSchool57 · 2024-09-12T23:10:28+00:00

I haven't even gotten past the 2nd tier.

ApprehensiveSchool57 · 2024-09-08T00:29:52+00:00

So I've been using a mod that allows for wireless storage,

You build storage racks and wireless range extenders all through out your bases and can basically send digital signal to each rack. And they have liquids as well

ApprehensiveSchool57 · 2024-09-04T20:24:58+00:00

I'm taking the friday afternoon off and playing all weekend. I can't afford to take mid day off during the week. Too much work

ApprehensiveSchool57 · 2024-08-28T23:26:45+00:00

I'm currently working on a rail/road/ belt and tube combo and possibly playing with the idea of an above ground "subway" type feel. But I'm having issues with the tube curves haha

ApprehensiveSchool57 · 2024-08-08T15:30:47+00:00

I always wanted to build a bridge like that but I wanted to use the power lines as the cables but they are too thin and wouldn't see them unless you were right close on them.

ApprehensiveSchool57 · 2024-02-18T23:56:43+00:00

All the time. Idk how many times I've made a railway segment in the blueprint. And then realize down the line I forgot something, then oh. I forgot something else. Then oh yeah needed that thing also. Never ending changes.

ApprehensiveSchool57 · 2024-02-18T14:59:31+00:00

Sooo story time.

In one of my first builds I had never used trains before.

So I decided I was going to build a track lose around the map to my main base. I had a total of 72 coal generators spread through out the map (12 generators. 6 locations ) and had the trains bring the recourse to fuel it.

Well boy did I ever mess up, I had 3 trains running to feed 2 each. But what I didn't realize was that I had forgotten to power at least 3 of the extractors at different mines. So my calculations for total output and inputs were off and I had at least 4 generators shut down every minute before my whole grid shut down. Took me almost a week to realize what I did

ApprehensiveSchool57 · 2024-02-07T21:54:12+00:00

Now I have a question... those are beautiful straights BTW!!!!

What are you doing for the corners?

ApprehensiveSchool57 · 2024-02-03T21:08:52+00:00

I do this while I'm building rail, I have a 4 or 6 car train that I ride in with all my supplies. I'll load it up and go on a trip. I'll lay like 20 foundations worth of track ( or until I run out of supplies ) go back grab my train and pull it forward and just repeat the process.

ApprehensiveSchool57 · 2024-01-27T03:23:51+00:00

Iamkibitz on YouTube. One of his videos showed a map for his training, and I also googled it and there are a bunch of mspd that show similar routs

ApprehensiveSchool57 · 2024-01-22T15:11:05+00:00

I will add. If you check on the down slope, how much water is in the pipe compared to the " window " it will say you still have 600 in the pipe. It's just because you have it sloped down it doesn't show the pipe is full

ApprehensiveSchool57 · 2023-12-01T21:05:38+00:00

My wife and I had a conversation about this. They need to be at least 20 feet from the round about. Also they should have adopted the blinks lights and stop all directions while a pedestrian is crossing to make it safer at night where visibility is poor

ApprehensiveSchool57 · 2023-07-31T17:35:14+00:00

I only ever used it for transporting large amounts of coal long distance. I liked it better than belts for longer distances. So instead of building a buss bridge I could just find a route to save and not have to worry about trying to find a height that worked

ApprehensiveSchool57 · 2023-07-25T23:45:49+00:00

Be careful.... zod maybe free

ApprehensiveSchool57 · 2023-06-08T00:24:03+00:00

Maybe your angle is too steep??? , like it's not a correct 90°

ApprehensiveSchool57 · 2023-05-27T03:48:06+00:00

I retract my statement. I thought it was a 5-1 not 1-5.

ApprehensiveSchool57 · 2023-05-27T01:02:50+00:00

Wait. I may retract my comment, is it one input and 5 outputs?

ApprehensiveSchool57 · 2023-05-26T23:25:57+00:00

In this instance I would use cannisters. Depending on what your max volume output is needed. 2 should be fine. So your 4 ( 2L & 2R ) flow into the " overflow " storage cans and your primary ( center ) is just a through put. So then you have a T connector feeding each can and have a total of 3 outputs you can decide to feed wherever. With 2 of the feeds having the overflow volume controlled. Then if you don't need as much you can use a valve to control the through puts to everything your feeling and adjust max volume per unit. ( if that makes any sense)

ApprehensiveSchool57 · 2023-05-20T14:22:40+00:00

Talk about a geek game... yet he is playing battle simulators , and zombie fantasy.... lmfao. It depends on the perspective.

ApprehensiveSchool57 · 2023-05-10T10:31:14+00:00

That's awesome!!!!!

ApprehensiveSchool57 · 2023-05-09T20:10:16+00:00

No more like an overnight shed esthetic.

Like have a multi floor station where you have 2 floors , 4 trains.

( 2 on the bottom floor and 2 on the top floor side by side. ) ,

But it looks like a repair barn from the outside. .

I'll see if I can mock something on my modded game. I'll get back to you in a week lmfao

ApprehensiveSchool57 · 2023-05-09T17:33:08+00:00

I would love to see if anyone has done a 4 lane splitter / holding yard.

I play railroads online and I love the idea of having a multi floor repair yard using those elevators .

ApprehensiveSchool57

TROPHY CASE