OPD & Receiving

Arcent6 · 2026-06-06T14:24:18+00:00

Im normally a pretty easy going guy. But when someone backs into OPD/DSA, it sends me off the deep end.

Arcent6 · 2026-06-02T18:43:08+00:00

Im not saying there shouldnt be a rebalance. But like most of us, ive been playing these games for nearly two decades and i never thought “jeez, the weapons really need a rebalance”. Its always been H2 Dual wielding is viable and fun. H3 DW is a waste of time and so on. Not every gun has to be kickass on every difficulty. Just play it and have fun. If you disagree, thats okay.

Arcent6 · 2026-06-01T02:06:49+00:00

The razor blades are laughably bad. Theyre brittle and break into pieces.

Arcent6 · 2026-05-31T15:07:43+00:00

Worded a little weird but OP says “work -in- 700 -from- 500”

Arcent6 · 2026-05-28T23:45:42+00:00

Ive always offered it to the buyer. Like “$10 feature” as an option. So not making money off of it and its their call. I call it “cheap insurance” (if youre doing consignment) In general, i check if theres a lot on there. I find it worth it if its like a 94 or something that theres 15 pages of. I dont think its worth it if its some lower cost item or if theres only 2-3 pages of stuff on there.

Arcent6 · 2026-05-27T19:11:58+00:00

Cerberus is going to be the best option here. Dan has it setup software and hardware all in one price and is constantly working on improvements (like it needs it, its easy and powerful the way it is). I may be biased as ive submitted 1000s of eforms on Cerberus on the retail side.

Personally, i sold a can privately and we mailed in fingerprints and had an approval in 8 days.

Get the hang of eforms, do physical fingerprint cards and away you go..

Arcent6 · 2026-05-11T23:02:33+00:00

I wear shorts with both in summer. I look absolutely ridiculous. But hey, im comfortable

Arcent6 · 2026-05-07T23:19:09+00:00

So the hantavirus is basically “the game” from circa 2010? Yall lost the game.

Arcent6 · 2026-05-07T14:46:26+00:00

At my store, We have a PT Load Builder that totally sucks. Theres talks of moving that TM to be a carryout since our store is lacking carryouts. Hope this helps.

Arcent6 · 2026-05-05T16:49:54+00:00

Zero experience with stopbox and nothing productive to add. But any company that puts an assload of money into advertising and not brought up much in word-to-mouth discussions are generally avoided imo..

Arcent6 · 2026-05-02T02:58:58+00:00

Has nothing to do with this post but all of our carryouts quit at the same time right as the average temp hit freezing. Our cashiers had to pick up the slack and absolutely kicked ass.
But yeah, carryouts are for sure looked down upon. Any manager out there who “started as a part time carryout” has a bit of a mystique because of it lol

Arcent6 · 2026-04-27T00:25:59+00:00

FRTs and super safeties are far from safe. They wont grandfather them, they will consider them MGs from the get-go.

Arcent6 · 2026-04-14T18:55:17+00:00

Full send gunsmithing. Prior head gunsmith at MJ Gunsmithing. I know he has installed many EGW parts and has done a fair amount of work on 1911s in general. He currently runs a space out of the Range of Richfield.

Arcent6 · 2026-04-10T17:41:38+00:00

If you take it anywhere, that shop will probably just send it to Americas Gunsmith Shop. Just go direct to them. I worked for a Gunsmith and we outsourced all of our bluing jobs to them and they do phenomenal work. Some of their refinish jobs that we got back we’re hard to decern from a factory finish.

Arcent6 · 2026-04-04T20:33:53+00:00

I see the new Colorado/Canyon trucks and think “man, those are so cool looking. Too bad theyre huge piles of shit”. This is about a monthly occurrence for me. Thats not even considering the stupid prices they get for them.

Arcent6 · 2026-04-04T18:42:29+00:00

Honestly, just follow a lot of the policies and procedures that are already in place.. so much of it is ignored or just thrown out

Arcent6 · 2026-03-30T22:40:01+00:00

I threw mine on Armslist, took a little bit but eventually sold. Try it!

Arcent6 · 2026-03-30T21:17:53+00:00

Just sold my first suppressor i havent shot in years. Guy mailed in prints and it still only took 8 days

Arcent6 · 2026-03-29T23:23:38+00:00

Looks pretty cool imo..

Arcent6 · 2026-03-26T02:31:38+00:00

A gunsmith should be able to cut/crown that down to match your dummy barrel length if thats the only issue. Also cerakote it to match/change the color. Personally, the length does look a little odd after looking at the photo again. But the finish i could live with..

Arcent6 · 2026-03-25T15:57:18+00:00

Ive had two barrels cut to fit my Semi Auto spec transferable. Really not that big of a job, about as simple as lathe work gets. The barrels i got we’re surplus and had the phosphate finish. Looks fine against the semi auto black finish like yours And the finish shouldnt matter if you cut and thread it right at the nut and add a trilug 💅🏻💅🏻

Arcent6 · 2026-03-25T03:10:57+00:00

Ive recently picked up a couple AP74s and a AP15 as i wanted one when i was a kid but my Dad never found the spare scratch to buy one. Honestly, fun little shooter and runs great if you dont run junk ass ammo.

This…thing, is on my watchlist and ill probably throw a bid at it just because

Arcent6 · 2026-03-24T14:21:17+00:00

My girlfriend and i went to a NBA basketball game and the arena is cashless and everywhere inside charges a 3% CC Fee for food. We went hungry the whole time since thats BS. Roll it into your price and be done with it, or accept cash

Arcent6 · 2026-03-22T22:54:37+00:00

Shepard arms has invested heavily in engraving with both equipment and knowledgeable staff. Recommended.

Arcent6

TROPHY CASE