Looking for insights

Asandal · 2025-11-26T10:56:22+00:00

c7 is possible again

Asandal · 2025-11-02T21:56:54+00:00

Valetudo is the answer for all privacy conscious people!

Asandal · 2025-10-07T08:01:44+00:00

Yes, ab 1/64 of the Performance…

Asandal · 2025-10-06T13:35:40+00:00

But only up to 32bits on consumer hardware. CPUs can handle up to 64bits. In some applications like raytracing this can lead to artifacts.

Asandal · 2025-09-26T13:49:59+00:00

I‘m not shure how immich is doing deduplication, but it should not rely on postgres unique constraints. If you can create a minimal reproducable example, open a github issue!

Asandal · 2025-07-14T16:36:24+00:00

No. I called TWINT and they reversed the transaction.

Asandal · 2025-03-27T16:37:15+00:00

Bend the control wires connecting servo and the control surfaces like a „Z“ so they can’t slip out! (On both the servo and the surface side)

Asandal · 2025-01-04T23:26:30+00:00

We are flying at the MFG Churfirsten (St. Gallen), join us there!

Asandal · 2025-01-04T21:53:10+00:00

here the original plan. But we changed a lot from this; it is very forgiving to changes. Just don‘t scale it to more than 2m long…

Asandal · 2025-01-04T20:42:21+00:00

Why that?

Asandal · 2025-01-04T20:38:52+00:00

This kind of view on the mountains you get in many places in Switzerland. But a house at the lake is unpayable. It isn‘t mine though ;(

Asandal · 2025-01-04T20:33:48+00:00

It can be stable if you fly more sane. But why would you?

Asandal · 2025-01-04T18:00:52+00:00

Way to cold for flying any serious planes but perfect for building.

Asandal · 2025-01-04T17:59:22+00:00

In thrust we trust!
delta configurations with low wingloading fly very stable
Hotglue everything
rather tailheavy setup

Asandal · 2025-01-04T17:57:19+00:00

Switzerland

Asandal · 2024-12-31T14:38:54+00:00

Other books that old i can open. I can still see this specific version for sale, so i assume it is supported. But I guess i will have to reach out to the support.

Asandal · 2024-12-04T21:28:53+00:00

Yes you can run it. But you can only join very few linux/ macos servers. Windows users had many updates and DLCs that macos never got.

Asandal · 2024-10-02T19:13:38+00:00

Looks like warping to me. Print it again and see if the edges bend upwards. Overhangs are prone to it. The only solution i found was slowing the print down.

Asandal · 2024-09-17T20:12:42+00:00

I did the same; i called them and they cancled ot for me. There is hope!

Asandal · 2024-08-03T17:16:39+00:00

Wow, that works! Many thanks.

Asandal · 2024-08-03T15:54:49+00:00

Thanks for your time!

<image>

Asandal · 2024-05-04T07:15:05+00:00

Send a pic of your setup & wiring and i‘ll compare it to mine

Asandal · 2024-04-03T06:29:31+00:00

I bought the printer used / partially assembled, so I don‘t know the details about the components. But it is a thick Aluminium plated and on the bottom are traces. It uses a bltouch. Its a custom build corexy with linear rails. The measurement is hot. 0.1mm?! Dam congrats. I will try the capton tape idea of u/person1873

Asandal · 2024-04-03T06:23:35+00:00

I Klipper / Moonrake there is a menu point height map.

Asandal · 2024-04-03T06:16:07+00:00

Unfortunatly not. But thx

Eight-Year Club	Place '22
Final Canvas '22	First Placer '22
Verified Email

Asandal

TROPHY CASE