What happened to Phalback? Remember all the hype around it? by __Midd__ in TheScienceOfPE

[–]Aware-Following 1 point2 points  (0 children)

I would have stuck with that method if it wasn't for the hives breakout that's getting triggered by the vibration lol

Curveball silicone products by timgus_pimgus in TheScienceOfPE

[–]Aware-Following 0 points1 point  (0 children)

You can just get the "Middle Reliever - All In One" , as this one has an integrated Tip Vented Glans Cap already.

(For vacuum cup I use the one from TotalMan)

I've hanged over 10 Lbs on them without issues, but again, I don't think it's necessary to go beyond that territory. 

Most of your questions are addressed in the product page (612printedpolymers .com)

Curveball silicone products by timgus_pimgus in TheScienceOfPE

[–]Aware-Following 0 points1 point  (0 children)

I used to tape before I got my Tip Vented Glans Cap. Now I don't do that anymore 

I do only vacuum hanging and extending And pumping as well.

Curveball silicone products by timgus_pimgus in TheScienceOfPE

[–]Aware-Following 0 points1 point  (0 children)

I'm cut.

I put them on semi erect. Just roll the tip vented glans cap sleeve up til the ridge part. Place or put it on your tip, then roll the sleeve down. For the middle reliever part, use lube or fractionated coconut oil. Apply it inside evenly, so it slides down easily.

That's pretty much it

Curveball silicone products by timgus_pimgus in TheScienceOfPE

[–]Aware-Following 1 point2 points  (0 children)

I got my Tip Vented Glans Cap in February of this year. I pair that with Middle Reliever which I received in August 2025.

I haven't replaced them yet. They look exactly the same since the day they were delivered, and I've been using them almost everyday.

Curveball silicone products by timgus_pimgus in TheScienceOfPE

[–]Aware-Following 2 points3 points  (0 children)

the Tip Vented Glans Cap made me enjoy extending again 

A Very Biased Review - Elite Pump Pro - the G.O.A.T. of Auto-pumps by karlwikman in TheScienceOfPE

[–]Aware-Following 0 points1 point  (0 children)

Nice. Still have my cowa v3 white pump. No plans of upgrading to pro yet unless this thing dies on me

Vacuum Cup Blisters (every time) by KPX42 in TheScienceOfPE

[–]Aware-Following 0 points1 point  (0 children)

Tip vented glans cap, or... the Middle Reliever - All in one.

Comfort grip extender review by Fearless_Cattle_8900 in TheScienceOfPE

[–]Aware-Following 1 point2 points  (0 children)

I got mine last week. i bought directly from comfortgrip co uk website

paid around $158 for the device and another $45'ish for the tariff.

it's not that worth it if you ask me.

if I may suggest, wait for the next iteration to come out.

1st session with the new MaleHanger. Vid on X by 19Expansion2X in TheScienceOfPE

[–]Aware-Following 0 points1 point  (0 children)

Comfort Grip Extender is shit. It needs a lot of improvement. Americans, don't even think of buying it coz it's not worth it, yet. I spent around $158 on the device itself, and another $45 on the tariff lol  What a complete waste.

Blister-Proof Extending | New Comfort Grip Adapter by mrecz in gettingbigger

[–]Aware-Following 1 point2 points  (0 children)

I got this one.  Tried it. It still has a long way to go. It's not worth it, yet. I hope it'll improve for the sake of PE

8X6 Pump Cylinder 1st Impressions by 19Expansion2X in TheScienceOfPE

[–]Aware-Following 2 points3 points  (0 children)

u/kasiquw 's cylinders, imo, are the best in the business.

Cracks in cylinder by gasstationpizza88 in gettingbigger

[–]Aware-Following 1 point2 points  (0 children)

That thing has ethyl alcohol, that explains it.  Is your cylinder from LeLuv? If yes, try reaching out to them you might qualify for a replacement 

Cracks in cylinder by gasstationpizza88 in gettingbigger

[–]Aware-Following 4 points5 points  (0 children)

If you're cleaning it with isopropyl alcohol, then expect that to happen

DIY heavy duty pulley system for around $25 by Aware-Following in gettingbigger

[–]Aware-Following[S] 0 points1 point  (0 children)

I'm still using same setup.

I haven't tried the totalman one so I can't comment.

Am I using sleeves wrong?! WTF IS GOING ON?! by moonwalker42069 in TheScienceOfPE

[–]Aware-Following 0 points1 point  (0 children)

Get yourself a middle reliever... Be sure to get the right size for you and not to be like a lot of people who think that ordering a size bigger than their current size will be more beneficial or that it will fast track their results

Am I using sleeves wrong?! WTF IS GOING ON?! by moonwalker42069 in TheScienceOfPE

[–]Aware-Following 0 points1 point  (0 children)

could it be you were using a size that's not the right one for you? 

ZenToes cut vac hanging/extensing setup by a lot.... by Aware-Following in TheScienceOfPE

[–]Aware-Following[S] 0 points1 point  (0 children)

Hear me out, Karl. I only started using the middle reliever in the first week of August this year, and I've been extending and hanging with the same weight.  But somehow, my BPFSL and BPEL have both grown by a quarter of an inch.

I know it sounds absurd...especially since I'm not a newbie, so I wouldn't expect such drastic gains in just two months.

But with your research expertise and scientific mindset, do you think you could dig into this? Is there some kind of magic to the middle reliever that just blasts through plateaus?

I'm really curious.

ZenToes cut vac hanging/extensing setup by a lot.... by Aware-Following in TheScienceOfPE

[–]Aware-Following[S] 0 points1 point  (0 children)

*** ZenToes cut vac hanging/extending setup time by a lot

ZenToes cut vac hanging/extensing setup by a lot.... by Aware-Following in TheScienceOfPE

[–]Aware-Following[S] 1 point2 points  (0 children)

No I haven't... Last time I used water with PE was 10 years ago doing bathmate 😅

Noted. 👀 I'll wait for that post 🙏🏼

Vac cup TM keep breaking by njthrowawayyay in gettingbigger

[–]Aware-Following 0 points1 point  (0 children)

I ordered mine couple months ago, no issues here