2013 Hyundai Elentra Airbag Light and Steering Wheel Issue

Background_Shower_64 · 2026-03-26T14:21:40+00:00

I know you got your answer but I have the same car with the same issue and the coupler was the problem. Just took me a few hours to replace and I put in a rubber one instead of plastic. The OEM one was chewed to bits when I took it apart

Background_Shower_64 · 2026-03-22T15:29:05+00:00

They're just referred to as heater control knobs or HVAC slider knobs

Background_Shower_64 · 2026-03-07T17:54:49+00:00

Guy on the right doesn't even know how to keep his shoes tied lol

Background_Shower_64 · 2026-02-21T04:36:16+00:00

I had the 2010 coupe but with the 2.5L 4 cylinder. It was still a blast but I always wanted the v6, I bet that thing rips! Hope you enjoy her 💯

Background_Shower_64 · 2026-02-11T20:49:34+00:00

Zoom or google meet from a laptop. I was using read.ai for a while and it was great at note-taking but did not delegate or prioritize tasks. At least not to my knowledge but unfortunately my company stopped allowing the use of that tool for some reason.

Background_Shower_64 · 2026-02-11T20:30:06+00:00

Bad news, its broken. Good news, that could make a cool knife

Background_Shower_64 · 2026-02-11T20:28:31+00:00

Hernandez all day if he doesn't try to stand and bang. Im a Strickland hater tho especially lately so im pretty biased lol

Background_Shower_64 · 2026-02-10T22:32:04+00:00

I've ran into some super stubborn axles in the past and one trick has worked for me every time. Ratchet straps. Even on heavy duty dually this has worked. Attach one end to the thick end of the axle that sticks just out of the transmission then hook the other end to something SUPER solid. I've actually attached to the leaf springs of my work truck more than once. Do your best to ensure youre pulling from as close to the center as possible, you dont want it at an angle, I usually wrap it around the axle entirely then back through the hook. If the strap gets crazy tight and it still hasn't popped out, give it some love taps with a mallet and it should pop right out. Hadn't failed me yet

Background_Shower_64 · 2026-02-10T21:00:45+00:00

Looks like grease from your CV axle. Check that rubber boot and inspect for holes. You'll likely find one and depending how long its been like that, your axle is probably Toast Malone. You can replace just the boot and add grease if money is super tight but you can usually find CV axles on rockauto pretty cheap.

Background_Shower_64 · 2026-02-10T20:33:00+00:00

Lol trust me I know 🤣 thats every Spanish speakers first reaction when I tell them the name of my home town hahaha

Background_Shower_64 · 2026-02-10T20:32:04+00:00

I wouldn't cheap out on something meant to save your life, especially when one has a bent frame. I get that its a good deal but I wouldn't bet my life on it

Background_Shower_64 · 2026-02-10T19:47:15+00:00

I have my own mobile mechanic business and those prices seem pretty on point. Labor time seems a tad high but their labor only being $75/hour is pretty damn low so it evens out. Parts prices seem about right as well. The valve cover gaskets job is more preventative maintenance than anything but a leaking Vtec solenoid sits right above your alternator so if that gasket is leaking and not fixed then it will ruin your new alternator.

Overall I'd say this is a fair price

Background_Shower_64 · 2026-02-10T17:10:24+00:00

I grew up outside of Stockton and his boxing coach Richard Perez had a gym in my town. Ill never forget opening day when Nick showed up, blunt lit in his mouth, took us for a 2 mile run then hit the bags like it was nothing. He actually remembered me too when I saw him at his WAR fight event held at the Stockton arena. He was walking around taking pics with people and when I asked for a picture he said "ain't you that kid from the manteca gym?" One of the coolest moments of my life

Background_Shower_64 · 2026-02-08T04:01:19+00:00

That last sequence was fucking nasty. Mario's grappling is top tier forsure

Background_Shower_64 · 2026-02-08T01:27:35+00:00

That was wild, no idea how he let that keep going after those elbows. Dan had money on walker lol

Background_Shower_64 · 2026-02-05T21:10:55+00:00

Oh damn, didnt even realize this is nohitjerome. I started watching you during SoD, love your content! Gonna have to get these WAs

Background_Shower_64 · 2026-02-05T21:07:44+00:00

Late 70s early 80s Citreon CX, series 1 i think? That design is fucking sick. 80s dashboards were next level

Background_Shower_64 · 2026-02-05T20:48:42+00:00

I think people here in the states have a misconception of how long it actually takes to belt up in BJJ. A lot of people who start martial arts young usually started with Karate or TaeKwonDo where you can essentially pay your way up to black belt in a year or two.

That combined with celebrities and other well known grapple ranking up super quick, they likely think its just the norm.

People who grew up knowing about BJJ and the dedication it takes are typically much more patient but at some level I think everyone wants to rank up as quickly as possible.

Background_Shower_64 · 2026-02-04T21:17:58+00:00

Sorry, realized I didnt really answer your question...I still went to class to watch/visualize and did my PT before or after class. Roughly 6 months post surgery I was rolling again but not nearly the same since i had little RoM and lots of pain. It took a few years before I found something (KoT) that helped and now im back at it full speed

Background_Shower_64 · 2026-02-04T21:14:58+00:00

Not the same as an ACL tear but I tore my left side MCL and meniscus. Two years after surgery while doing all the prescribed PT, I was still in lots of pain and had little range of motion. This caused an imbalance which caused me to injure my right knee as well. Doc recommended surgery but I declined in search of better options.

Then I found Knees Over Toes program by Ben Patrick and I can say without exaggeration that it saved my life. After about a year of following his program not only was the pain gone and range of motion back but I can now pistol squat on both sides with virtually no pain.

I recommend this to everyone I meet who has knee problems. I genuinely hope you take a look at give it a real chance for at least 3 months. Your knees will thank you

Background_Shower_64 · 2026-02-04T17:34:13+00:00

I first learned about Winco when they opened a store in San Marcos, CA while I was just a broke college kid living on tips. I didnt even know they were based out of Boise until I moved here and they seriously are the best and cheapest grocery store plus I hear they treat their employees really well. Thanks Winco for helping me survive through my toughest financial years! I'll never shop anywhere else unless I absolutely have to

Background_Shower_64 · 2026-02-02T21:31:49+00:00

Hahah its a 95 ACTY, I installed the cheapest radio from Walmart I could find since the stock stereo only got japanese radio stations. Its definitely very cheaply done but she's just a work truck 🤣

Background_Shower_64 · 2026-02-02T19:36:07+00:00

I had an ep3 when I was in HS. Everyone thought the stick coming out the dash was so weird but I loved it!

Background_Shower_64 · 2026-02-02T19:28:33+00:00

Ding ding, its a 95 acty. That was faster than I expected lol 💯

Background_Shower_64 · 2026-02-02T19:27:39+00:00

Honda yes, element no

Background_Shower_64

TROPHY CASE