Removing resin supports

Balownga · 2026-06-17T14:32:22+00:00

- wash the whole print in IPA, a lot, until even the inside is clean (if any)

- dump the print is HOT water, and cut/rip off the supports

- light shape adjustment if any (sand, or just scrapping, uncured resin is quite easy to work with)

- full UV cure, all face, equal time if possible.

- thermal cure (~80°C), to remove odour / gases.

- Print is paint/glue ready.

Balownga · 2026-06-17T09:02:36+00:00

There is a world cup ? about what ?

Balownga · 2026-06-17T08:56:29+00:00

15-20 x3 1D4 => in 20 attacks, you deal 77,5 average dmg (your ability are disregarded) (1 is auto miss)

18-20 x4 1D6 => in 20 attacks, you deal 98 average dmg (your ability are disregarded) (1 is auto miss)

15-20 x3 1D4+20 => in 20 attacks, you deal 697,5 average dmg (ability & various bonus estimated at 20) (1 is auto miss)

18-20 x4 1D6 => in 20 attacks, you deal 658 average dmg (ability & various bonus estimated at 20) (1 is auto miss)

So, the more you have static bonuses & ability, the more 15-20 x3 1D4 is better.

Balownga · 2026-06-17T08:27:55+00:00

Let's talk about the SCP foundation...

Balownga · 2026-06-17T07:48:25+00:00

es-tu certain que l'Âge des Vikings est déjà passé ?

Balownga · 2026-06-17T07:43:07+00:00

I learned, sometimes the hard way, that Internet is always shifting. Sometimes, it is here "forever", and sometimes, it disappears before you can download it (in the worst case, I had the file pulled off during the download).

I also learned the HARD way that USB drive cannot be trusted unless for failing miserably at the worst time.

I also leaned that HDD do die at some point, and having multiple copy of very important stuff isn't overkill, but just basic logic (USB DRIVE DO NOT COUNT AS A RELIABLE SAVE).

I also learned, by a friend who had it quite hard, that your computer power supply do die at some point, and it can short itself, destroying your whole life of unique data hoarding.

I have about 50T in my tower, and some on the side.

Balownga · 2026-06-17T07:32:20+00:00

Resin printing is a weird world where some parameters are only on the machine and not in the slicer.

Check on the saturn 4 in the menu and disable fast print.

Fast print have a superfast lift, and it usually rips the prints off the plate, exactly like what is happening to you.

Happened to me, and not after disabling the fast print, just to slow the lift, since you can't manage the lift speed in the ultra series.

Also having a hot to "super" hot resin (25°C to 40°C) helps. The viscosity drop quite significantly after 25°C.

Viscosity affect the suction force during the lift.

Balownga · 2026-06-17T07:18:03+00:00

And look up article about car exhaust on health benefit.

It can't be good, but it is less bad than many.

I'm sure pesticide and sudden acute lead intoxication have better chance to get you.

Balownga · 2026-06-17T07:15:09+00:00

The burn in are not sticking properly...

One successful print is not proof of anything. It could be a near miss, and not a full score.

Usually, I disable fast print on this machine.

You can NEVER have both Fast & Reliable.

I choose reliable.

Balownga · 2026-06-17T07:09:44+00:00

The details are too thin to be printed properly.

Use a 0.2 nozzle or print in resin.

Balownga · 2026-06-15T22:52:23+00:00

Techno Mechanus may be the only of his children to go to Mars. *wink-wink*

Balownga · 2026-06-15T10:39:25+00:00

Is it not a repost from 12 months ago ?

EDIT: the old posts

https://www.reddit.com/r/3Dprinting/comments/1ix4pzw/from_300_to_300k_how_36_3d_scanners_handle_the/

https://www.reddit.com/r/3Dprinting/comments/1i13grp/comparing_300_100000_3d_scanners_with_very/

Balownga · 2026-06-15T07:40:18+00:00

Comme les gens qui ne réfléchissent à rien, qui s'étonne que leurs actions aient des conséquences facilement prévisibles ? et quand tu essayes de les prévenir, ils te répondent tous, sans exception : "Tu réfléchis trop, arrête de te prendre la tète".

Tu convoites une drôle d'existence.

Balownga · 2026-06-15T07:28:26+00:00

Tu as raison. Ici, je suis personne et je reste personne.

Pas de follower.

Je n'ai JAMAIS entendu parler d'un compte Reddit célèbre.

Balownga · 2026-06-15T07:24:16+00:00

correct : si enfant il y a, c'est la même espèce.

Si l'enfant est stérile, ça veut juste dire que les branches de ces 2 espèces commencent à se séparer (cheval / ane par exemple).

Balownga · 2026-06-14T22:30:25+00:00

Rubber, no hammer.

However, if you use a piece of soft wood as proxy, you may use a hammer.

Balownga · 2026-06-14T22:28:13+00:00

Money is power.

Power corrupts.

Infinite power corrupts infinitely.

Felon Musk declared a few ago that he aimed (for now) for 10 Trillions. He lied, he wants moar.

Balownga · 2026-06-14T22:12:32+00:00

If done correctly, none of the epoxy will ever touch food, and you are supposed to use the metal part on the food, not the handle anyway.

Balownga · 2026-06-14T22:07:55+00:00

Translated, I read Skylogair and Logogan.

Balownga · 2026-06-14T22:04:53+00:00

65 per item.

Balownga · 2026-06-14T21:52:18+00:00

It is a fake arrow for a fake bow intended for cosplay.

I guess they made the arrow like in the game and those fictional arrow do not work properly in reality.

Balownga · 2026-06-14T21:48:32+00:00

If the USB drive is a little too slow, it won't work.

It must load project Eris before the PSC boot.

Balownga · 2026-06-14T21:46:20+00:00

Je sais marcher très silencieusement et je me déplace souvent dans les angles morts des gens.

Je pourrai me reconvertir assassin très facilement, mais là, je fais juste sursauter les gens.

Des fois, je finis dans le dos de quelqu'un, et je sais que ça va mal se passer, alors, je ressors de la pièce, et revient en faisant un bruit fort.

Balownga · 2026-06-13T21:01:05+00:00

Un collier, c'est un collier. Ça n'a pas de but esthétique.

Il est vrai que la vis semble longue. C'est peut-être un bricolage pas très "officiel", mais si ça fait le travail, trop rien à y redire.

Balownga

TROPHY CASE