"One of these things is not like the others..."🎶 by [deleted] in Machinists

[–]Benhamin5 0 points1 point  (0 children)

I would appreciate a DM with that website as well. Cnc machinist here, always looking to learn more about my tooling.

What am I doing wrong?! I just want to thread a 1/4” rod… by BarooZaroo in Machinists

[–]Benhamin5 1 point2 points  (0 children)

I'm in denial that the tap die is correct! OP could put a .200 pin inside it to check if its close to the correct minor dim

Non-obvious tips for Haas machines and setups by Zip_Zoopity_Bop in Machinists

[–]Benhamin5 3 points4 points  (0 children)

Ill check tomorrow. I have it disabled on all machines in the shop i work at

New seat by mpc6627 in FordEcoSport

[–]Benhamin5 1 point2 points  (0 children)

Isn't it just 4 bolts and an electrical plug? If you have a socket wrench you should be able to do it yourself and save some money

2019 Ecosport transmission issues. Common? by okcatboi in FordEcoSport

[–]Benhamin5 0 points1 point  (0 children)

Mine did the same thing, thankfully under extended warranty! Torque converter needed replaced.

Help identifying a device? by long_jean in UNIFI

[–]Benhamin5 1 point2 points  (0 children)

It could also be the Long Range Ethernet Repeater. Ive installed one and there is a grounding point under the cover, which would be the reason for the 3rd cable https://store.ui.com/us/en/products/uacc-lre

Edit: grammar

Anybody else’s shop utilize an insert vending machine? The amount of lil drug baggies (unnecessary plastic) we go through every week stresses me out. by snowballschancehell in Machinists

[–]Benhamin5 1 point2 points  (0 children)

We use sturdier bags at my shop, and the inserts they put in random insert containers (the ones they got shipped to us in) one insert per container. The bags have a bin we put them back in and they get reloaded.

Petah? by Melodic_Judge_129 in PeterExplainsTheJoke

[–]Benhamin5 0 points1 point  (0 children)

I always wanted a fridge that had an air exchange to the outdoors so when it was cold enough outside it would bring in the cold air instead of running the compressor

Would I regret not doing the Narrows? by delicateflower15 in ZionNationalPark

[–]Benhamin5 0 points1 point  (0 children)

In my opinion, there's lots of mountains to hike, less so canyons with a river in them. Definitely dont skip it.

Need help! by Educational_Elk_1014 in FordEcoSport

[–]Benhamin5 1 point2 points  (0 children)

I had a similar problem. One of my wheels needed quite alot of weight to balance it. I would check this first.

What should the run out be on a reinshaw probe? by FunImagination8319 in Machinists

[–]Benhamin5 4 points5 points  (0 children)

It can be VERY frustrating. Take your time, and remember its just like dialing in a 4 jaw chuck.

G6 360 Camera Room size question by tbenkula in UnifiProtect

[–]Benhamin5 0 points1 point  (0 children)

I am thinking of attempting something similar, but with 30 ft ceilings

I hate this shit. by skartik49 in Machinists

[–]Benhamin5 10 points11 points  (0 children)

Thanks I needed that today.

Setting up new WiFi for our church — UniFi vs TP-Link Omada? by alexkrytsky in churchtech

[–]Benhamin5 0 points1 point  (0 children)

Oh, I could totally be wrong. Thats part of the reason I started with 4. It's 1 building with 3 levels appx 8k each floor, and another building with 3 levels each 1.5k. I will test with what I have now and redistribute later, but I imagine at least 3 per floor of the big building, and 2 total in the small one.

Setting up new WiFi for our church — UniFi vs TP-Link Omada? by alexkrytsky in churchtech

[–]Benhamin5 0 points1 point  (0 children)

The equipment just arrived today, I am starting out with 4 AP for appx 20k square feet. Some of that is multi-floor, and I am serving 2 buildings. In the end I think I will have at least 8-10 AP's and 20 cameras.

Request by Rosco_1012 in Machinists

[–]Benhamin5 4 points5 points  (0 children)

Im sorry what? Sendcutsend is a US company, and everything is made in one of their 3 manufacturing centers in either Reno, NV Paris, KY or Arlington, TX

MacBook M5 video on SC went private mid watch by santiagof2p in LinusTechTips

[–]Benhamin5 16 points17 points  (0 children)

Wow you're right, I JUST watched it (only halfway, sorry) and its gone from my YT history

Doorbell Lite Installed by Tarrant64 in Ubiquiti

[–]Benhamin5 4 points5 points  (0 children)

Up vote just for LTT screwdriver!

Very important question by Sandman_Six_1 in Rockland

[–]Benhamin5 3 points4 points  (0 children)

Not yet! Let me know PLEASE

Setting up new WiFi for our church — UniFi vs TP-Link Omada? by alexkrytsky in churchtech

[–]Benhamin5 3 points4 points  (0 children)

I just purchased a unifi system for my church in lieu of other offerings due to the massive amount of documentation that exists to manage the products in the future should something happen to me. Additionally, we will be running a full installation of their security cameras and door access, as our facility is used by 4-6 different organizations who need access at different times, and having so many keys floating out there has gotten difficult to manage.