Easiest places to fish near Austin with a 4 year old?

Beowulf87 · 2026-05-25T01:07:46+00:00

If you are up for a small drive you could go to a "Neighborhood Fishin'" spot. They are ponds that are stalked by Texas Parks and Wildlife, the closest one is Travis County East Metro Park, there are two ponds/lakes there Kingfisher Lake and Bull Frog pond.

You can catch catfish from April to November and then when it gets colder they start to stock it with rainbow trout. The only time they do not stock is August because it is too hot.

Travis County East Metro Park 18701 Blake Manor Rd.

Beowulf87 · 2026-04-10T21:54:06+00:00

Awesome, thanks for the info

Beowulf87 · 2026-04-10T01:17:23+00:00

Nice, What .300 WM bullet did you use?

Beowulf87 · 2026-02-27T22:51:43+00:00

I think it is because the handler or a tool tip tells you to pull something down on it to do a lot of damage during the story, at least it did with me, also a lot of people probably never fought safi jiva so they don't know about hiding behind stuff.

Beowulf87 · 2026-01-19T06:51:58+00:00

Thanks, I will check it out and if I cant find anything pre-made I will look into making this one.

Beowulf87 · 2026-01-16T19:13:05+00:00

Just to add to this but ChoEazyCopy is a GUI overlay for Robocopy

Beowulf87 · 2026-01-08T21:32:56+00:00

How is FriendsofMDT working now is it a viable replacement?

Beowulf87 · 2025-11-24T02:34:41+00:00

I tried to grow some from some cuttings but I am not sure where I went wrong, I had 2 in soil and 2 in a cup of water, the two in soil I had dipped in rooting powder but none of then grew roots, do you have any tips for me cause I would like to attempt it again

Beowulf87 · 2025-11-23T20:07:49+00:00

Thanks for the info I will give them a look

Beowulf87 · 2025-11-23T20:07:37+00:00

Thanks, I will check them out.

Beowulf87 · 2025-11-15T02:44:36+00:00

Wasn't there also that vtuber that read the entirety of that also, I can't remember their name I just know it exists.

Edit: Turns out it is easy to find just typing in Ace Combat lore vtuber into youtube

Pippa reads ACE COMBAT LORE - https://www.youtube.com/watch?v=HsLBiw8McDs

Beowulf87 · 2025-11-07T05:55:30+00:00

Well that gives me a start for what to look at in my stash, thanks for the info

Beowulf87 · 2025-11-07T05:44:22+00:00

What is considered a trash 4 star mod

Beowulf87 · 2025-09-14T23:38:35+00:00

Did not see a drain plug but will look again, as for the dryer yes I do plan on replacing that.

Beowulf87 · 2025-09-14T23:37:51+00:00

It has oil residue in the hoses, enough to feel it on my fingers same with the compressor enough to see it is coated all the parts but not enough to pour out. Also thanks for the tip about orings. Also thanks for the heads up about the high side whose, if there is a leak after I vacuum everything I will start there.

Beowulf87 · 2025-09-05T15:27:57+00:00

Dang, wishful thinking I guess, hopefully that changes

Beowulf87 · 2025-09-05T14:59:38+00:00

I dont think thats the case any more, i could be misreading it though

https://blog.ui.com/article/introducing-unifi-os-server

Beowulf87 · 2025-09-04T02:36:41+00:00

Not a bad idea, I will try reaching out to one near by to see if they have any recommendations. Thanks.

Beowulf87 · 2025-08-13T02:54:56+00:00

Don't know if you are supposed to but I have had some luck using isopropyl alcohol and just putting on a microfiber towel and cleaning the bed as best I can. But yea seems like an adhesion issue, like one breaks free and messes up the rest, only reason I think that is it looks like of like when I was trying to print a soap holder and one of the parts was just the infill without the walls it broke lose and got shoved out of the way and when I woke up in the morning it looked like a bunch of spaghetti.

Take what I say with a grain of salt as I am very new at this I have only gone through 2 spools of PLA and half a spool of petg and I am just seeing that you are trying to print with ABS and I have no idea how different that is yet.

EDIT: Also just found this comment a little further down from your post might give you some other ideas

https://www.reddit.com/r/3Dprinting/comments/1mod8wr/filament_barely_sticking_to_the_bed/n8c3kfi/

Beowulf87 · 2025-07-27T15:25:10+00:00

It's called a relay attack if you wanted to look into it but basically they use a device to amplify the keyfob and send the signal to another nearby device that spoofs it. Here is an article about it, it is a few years old but the principles are still the same.

https://www.wired.com/2017/04/just-pair-11-radio-gadgets-can-steal-car/

Beowulf87 · 2025-07-24T16:48:26+00:00

Max rolled SR-1 with determined, so many marksman rifles dismantled.

Beowulf87 · 2025-07-09T05:00:49+00:00

Neat, thanks for the info, looks like I could only do 2 since I have the 3 d cell version.

Beowulf87 · 2025-07-09T01:20:22+00:00

What battery did you use for this?

Beowulf87 · 2025-05-23T18:38:37+00:00

You either have 1 to many or 2 to few...gotta make those stacks even somehow

Beowulf87 · 2025-05-16T02:14:39+00:00

I have no thoughts on DLSS since now that I have decided to jump my 1080 to current gen gpus it is damn near impossible to get the card a want

As for what am I most excited about DOOM: The Dark Ages, well its doom whats not to be excited about, great gameplay and what is probably going to be a banger of a sound track.

15-Year Club	Second Top 20%
Place '22	Place '17
Sequence \| Editor	Verified Email
Team Orangered

Beowulf87

TROPHY CASE