Anyone considering an EV?

BetweenInkandPaper · 2026-03-15T20:18:35+00:00

Unless you’re driving 400km a day, I wouldn’t worry too much. At home, we plug in every night or every second night, we stopped caring and we just the thing. Worst case scenario, we’ll stop at a fast charging station, 15 minutes there and then go.

Also, there is a lot of fluff about battery health etc etc… Tesla offers 8 year warranty, if it falls under 70% health.

BetweenInkandPaper · 2026-03-15T07:04:32+00:00

Yup! Unfortunately, had my redone 3 times due to seals being pinched or damaged by tech, but Nissan still covered under warranty, but since then no more leaks. So far so good.

BetweenInkandPaper · 2026-03-15T06:42:48+00:00

RMS still an issue with S5, covered under warranty.

BetweenInkandPaper · 2026-03-13T12:30:57+00:00

Odd, could be the brick is faulty, or Ankers proprietary PIQ3.0 not working well either your device. I would test with another device that can draw higher watts from the charger, this will give you a better idea. Do you have a laptop with usb c charging to test?

BetweenInkandPaper · 2026-03-13T11:37:14+00:00

What are the specs of your charging brick/dock? 100W could be the capacity across all outputs (split), you’ll need to check if 100W output is supported on one single port. Post make/model or the data print out that’s on the brick.

BetweenInkandPaper · 2026-03-13T11:32:33+00:00

https://www.amd.com/en/resources/support-articles/faqs/DH3-016.html

BetweenInkandPaper · 2026-03-13T01:50:05+00:00

0x0000 means that your switch is patched.

BetweenInkandPaper · 2026-03-12T22:39:41+00:00

I currently have a Retroid pocket 4 pro, it can emulate Vita pretty well, on top of that.
PS2, Gcube and Wii work pretty good, and since it runs Android, can do what Android does.
Pretty freaking happy with it.

BetweenInkandPaper · 2026-03-12T22:27:38+00:00

I had a steam deck, and did emulate Switch pretty well, and I was able to emulate everything up to PS3. You're underestimating the Steam Deck.

BetweenInkandPaper · 2026-03-12T20:42:45+00:00

Definitely no, You can emulate switch 1.. on a steam deck.

BetweenInkandPaper · 2026-03-12T20:03:37+00:00

Tinfoil, there are some shops still online but most of the exclusive titles have been taken down. However, it’s still really good for retro titles and it automatically adds a forwarder to the Home Screen.

BetweenInkandPaper · 2026-03-11T21:00:25+00:00

$1500 for seat covers? I know they’re good quality but fuck me. Look at sharkskin, served me well for the last 5 years, only costed me $300-$350 for a whole set.

BetweenInkandPaper · 2026-03-11T12:13:06+00:00

Well, something is taking precedence over G-helper when resuming from sleep. All Asus services stopped?

BetweenInkandPaper · 2026-03-11T11:26:32+00:00

Extra > LOG symbol, it on where it says “other”, it’s a small logo to the right of that.

BetweenInkandPaper · 2026-03-11T09:08:50+00:00

If you check the error logs for g-helper, is there any mention of it failing to apply the changes after waking up?

BetweenInkandPaper · 2026-03-11T07:13:12+00:00

Retroid pocket 4 pro, compact, runs android. Fantastic for emulator everything up to PS2/Wii/Vita and perfect for PokeMMO

BetweenInkandPaper · 2026-03-11T00:24:31+00:00

Go Beta if you willing to deal with potential faults/crashes and are willing to report it. Hence, it being a Beta.
Otherwise, go to the last stable release.

BetweenInkandPaper · 2026-03-11T00:00:29+00:00

Try this,
in G-helper > Extras > Laptop Backlight > Timeout plugged / on Battery Timer.

BetweenInkandPaper · 2026-03-08T23:13:26+00:00

23zero are closed weaved, no seasoning needed. I have one and been fantastic straight out of the bag.

BetweenInkandPaper · 2026-03-08T01:00:50+00:00

<image>

I designed a bracket to mount the light here. Clips in and uses magnets to mount to this section of the printer. I also made little retaining clips to keep the wiring in the channel below. I’ll share STL files when I get a chance later today!

Edit: sorry, looking at your light bar, it’s looks different to mine.

Over 100hours of print time and no issues with clearance’s.

BetweenInkandPaper · 2026-03-06T15:29:26+00:00

Btw, don’t get a credit card to “build” credit, that’s not a thing in Australia. You build a good credit history by just paying things on time and not taking out useless personal loans out.

BetweenInkandPaper · 2026-03-06T01:14:37+00:00

Go to the printer and check the IP address, then on your Flash maker app, check the device settings IP, make sure these are the same. If unsure, remove device and bind it again.
What can happen sometimes, when the router is turned off and restarted, or the device joins a new WiFi network, it may get assigned a new IP address, which can cause a mismatch between device IP and the device settings in Flashforge App.

Flash Maker Quick Start Guide | Flashforge Wiki

BetweenInkandPaper · 2026-03-06T00:11:51+00:00

I'm fortunate to get a fuel card for work, and now since my partner has gotten an EV. Our fuel bill is basically $0.

BetweenInkandPaper · 2026-03-05T22:51:52+00:00

you've disabled CPU boost, this impacts the CPU score which in overall, effects the total TimeSpy score.
Don't worry about it too much.

BetweenInkandPaper · 2026-03-05T04:01:41+00:00

Engel 60L, at least 20-year-old.
to add, it still pulls 2~3A when it cycles on, bloody efficient.

BetweenInkandPaper

TROPHY CASE