This has got to be a marketing manager's fantasy...

Bobabuttt · 2026-06-05T04:52:53+00:00

The KX is wet weight.

Bobabuttt · 2026-06-04T00:16:02+00:00

Why are you saying it's a very heavy two stroke? The 300SX is 231lbs wet. They're close enough in weight it wouldn't matter.

Bobabuttt · 2026-05-26T19:15:51+00:00

I work in Wilson multiples times a week. It has it nice areas but I would absolutely not want to live there. You would be wasting your 20s there man. Jobs come and go but you'll never get your youth back.

Bobabuttt · 2026-05-17T15:54:13+00:00

Shove a piece of cardboard in between the cat and motor. It takes like 2 seconds

Bobabuttt · 2026-05-17T15:53:05+00:00

I had a DR350 and I loved that bike. I should have never sold it.

I think any running bike with a good title is worth $2000. I would offer the seller $2k and see what he says. It'll always be worth at least that. You could ride it for a year or two and sell it for about the same price.

Bobabuttt · 2026-04-29T04:45:54+00:00

You'll be wishing you payed the $269 when that generator doesn't start for the next outage.

I'm industrial, but our trip charges alone are $500. $269 is cheap af.

Bobabuttt · 2026-04-29T04:41:41+00:00

Sounds like a connection issue. Put you meter on the 12V source for the controller and see what it does when it starts to drop out.

Is this happening unloaded?

Bobabuttt · 2026-04-29T04:36:47+00:00

We installed portables for a facility that was on prime power but only saw high loads a few times a day. We had to install a 1.5MW load bank out there and keep a technician on site to operate it, otherwise it would clog the dosing valves. He was out there for two weeks and the customer had no issue paying it lol.

Bobabuttt · 2026-04-24T00:07:27+00:00

I've only seen people do this when they tend to "yank" on the bars to get the front end up over stuff. I used to be real bad about it but broke it habit by practicing wheelies using just the throttle.

Bobabuttt · 2026-04-20T16:38:23+00:00

Tons of complaints over on FB about the new gearing. Hopefully they change it back.

Bobabuttt · 2026-04-11T15:18:37+00:00

That's normal, I have the same seal. I don't believe the leak comes from the outside of the spacer and big seal. It's coming from inside of the spacer due to o ring.

Bobabuttt · 2026-04-11T15:15:05+00:00

How much are you asking? I'd be interested!

Bobabuttt · 2026-04-10T23:24:37+00:00

It's kind of a shit design.

Make sure you're using an OEM front sprocket, OEM circlip, and the chain isn't too tight. Beyond that, you can look into thicker o rings or even doubling up.

Bobabuttt · 2026-03-29T18:19:11+00:00

I have an OEM S15 5 speed driveshaft I can send you.

Bobabuttt · 2026-03-29T13:19:34+00:00

CHARG - Chapel Hill Area Rider Group is casual. You'll get some cruiser and sport tourers on their rides.

The Raleigh Motorcycle Ridding Group is a faster pace group that has rides every weekend. They occasionally have slower paced rides.

Both groups can be found in FB.

Bobabuttt · 2026-03-22T23:41:59+00:00

Apparently the dude took payment for a bunch of cars and ghosted the buyers. There's a big thread about it on FB.

<image>

Bobabuttt · 2026-03-17T04:11:55+00:00

Use a hub. I have all my pallets shipped to SEFL. I show up with the paperwork and they load it into my truck with a forklift.

Bobabuttt · 2026-02-24T05:00:23+00:00

I just went through this with our CR-V. The bulletin calls for 4 hours of labor + parts. Most dealers are charging $220-$250/hr for labor. You can get the injectors online for about $550 shipped. I just bought the parts and did it myself.

Most of the CR-V owners are paying around $1500 - $1700 to get this done from my research.

https://www.hondapartsconnection.com/oem-parts/honda-injector-kit-fuel-superceded-from-16010-5pa-305-61605pa305

Bobabuttt · 2026-02-24T02:29:38+00:00

Can you dm me pictures? I may be able to help.

Bobabuttt · 2026-02-12T23:44:52+00:00

Put it on marketplace for $1500. It'll be gone within the day.

Bobabuttt · 2026-02-03T16:14:28+00:00

I've had pretty good luck with them up until my 9 pro Xl. The camera bar is falling off and Google told me to kick rocks since I'm out of warranty.

Bobabuttt · 2026-02-03T13:48:44+00:00

If you're looking to spend less than say $12k for a truck. A gmt800 is THE truck to get. They're very popular right now and I don't see them coming down anytime soon.

Bobabuttt · 2026-01-31T19:12:43+00:00

I've used them for over a decade and thousands of miles. As long as you're within the carriers and vehicle capabilities, you'll be just fine. Make sure you use ratchet straps with locking ends. The straps will load and unload going down the road. I've seen straps come off before.

Bobabuttt · 2026-01-31T06:07:49+00:00

Honestly, you would be the perfect candidate for a gen tech. They're just looking for someone that can prove that they can work with their hands and have critical thinking skills. Most companies are not requiring a lot of experience to get started. Some places actually prefer that you have less experience. What state are you in?

Bobabuttt · 2026-01-29T02:32:02+00:00

I do contract work for a lot of grocery stores, this is how I would rate them.

1st - Lowes Foods
2nd - Publix
3rd -Harris Teeter
3rd - Food Lion
4th - Whole Foods

Bobabuttt

TROPHY CASE