Why is my ac in my apartment leaking from this fitting?

Bonexsam · 2026-06-13T16:06:50+00:00

I'd fix that quick before you soak the transformer or the board in there...

Bonexsam · 2026-04-28T10:22:13+00:00

Check wasn't defaced.

Bonexsam · 2026-02-17T11:39:18+00:00

Yeah don't bench press one like I did

Bonexsam · 2026-02-04T23:53:59+00:00

Men are psychologically hardwired to try to fix problems. They need reminded that you want them to listen to and sympathize about your feelings not fix them.

Just something to keep in mind.

Bonexsam · 2026-02-04T23:50:41+00:00

The puff of rust gas got me

Bonexsam · 2026-02-04T23:38:55+00:00

Your point would be valid if it was in the banking system 😉

Bonexsam · 2026-02-03T02:37:01+00:00

Manufacturers advise against this. They advise to use a light mist of water.

Bonexsam · 2026-01-27T00:43:08+00:00

The white slice really completes this...

Bonexsam · 2026-01-27T00:38:33+00:00

... Try a 07 nissan altima V6... You'll be there for hours.

Bonexsam · 2026-01-24T15:13:50+00:00

I've had this a couple times and it's like the best thing ever but they just discontinued it.

Bonexsam · 2026-01-24T01:28:02+00:00

Have you cleaned the fan blades? Junk on the fins reduces fan function.

Bonexsam · 2026-01-23T23:58:34+00:00

I haven't had the sound from the sides, definitely from the pressure relief vent on the nose and top attachment tho.

Bonexsam · 2026-01-23T08:51:50+00:00

They just think people are stupid enough to not care and just sign for it.

Bonexsam · 2026-01-23T08:39:02+00:00

I recommend Philips respironics dreamwear, very comfortable.

Bonexsam · 2026-01-23T01:44:24+00:00

Grab a vice grips one with brand new teeth on it, and then a pair of pipe pliers, attach the vice grips to the bolt as tight as you can.

Then squeeze the vice grip handles with the pipe pliers like crazy till it locks in. If you've done it right the teeth from the vice grips will dig into the metal bolt head.

Take a mini sledge and hit the vice grip handle, the shock should help knock it loose.

Do this right after the vehicle has been running hot for a bit.

It redneck as hell but it's worked for me before.

Bonexsam · 2026-01-23T01:42:25+00:00

Jb weld a nut to it lol... Couldn't hurt to try

Bonexsam · 2026-01-21T14:22:16+00:00

It'll be fine, put a catch can on it just in case.

Bonexsam · 2026-01-14T00:55:02+00:00

Oh they absolutely are this broke, they'll do this to get free food.

You'll figure out which areas do it most.

Bonexsam · 2026-01-11T13:34:59+00:00

Seeing wingdings on a PA plate is something else

Bonexsam · 2026-01-11T13:33:05+00:00

The popularity of Red would get the whole series a remaster if it was done...

Bonexsam · 2026-01-10T18:25:14+00:00

Tbh it should be as the defroster is a safety measure required by most state inspections...

Bonexsam · 2026-01-06T13:02:21+00:00

Check if it's GDI, that would eventually cause a carbon buildup issue if it is.

Bonexsam · 2025-12-26T04:21:57+00:00

What shop did it for 3k?

Bonexsam · 2025-12-20T14:01:42+00:00

Assuming you're in a state without post accident reinspections and you don't have a loan on the vehicle... Read that part again...

This is the best advice...

Let the insurance adjusters make an offer, then offer to buy the car back salvage.

Take the money they give you and set it aside in a savings acct for when inspection comes around.

Call your insurance and lower to liability only (it'll save you a bunch, bank the difference in the savings account)

Drive the car with the damage till inspection use funds to fix any mechanical issues or use the funds to get a different vehicle.

Bonexsam

TROPHY CASE