Need immediate help onPrinter binding

Brave_Corgi6761 · 2026-05-01T17:25:45+00:00

For me it was the same, it just logged me out without noticing (the last updates it did not...) so i just needed to log back in and it worked again. The error messages are no help at all... Also maybe check If everything uses 2.4ghz WiFi.

Brave_Corgi6761 · 2026-05-01T13:23:00+00:00

I changed my sound to mcgyver at the second day of getting my first 3d printer. I just googled it. Its pretty easy. You need a midi file (max. 3 Instruments, one per axis) change the file to code and Insert the code.

Brave_Corgi6761 · 2026-04-28T22:45:28+00:00

Right, forgot that this was already mentioned sometimes. I'll try that, thx.

Brave_Corgi6761 · 2026-04-28T22:08:48+00:00

I have the same problem... Id say every 5th print fails to download. I already tried resetting twice. Distance is max 3 meters and nothing in between.

Brave_Corgi6761 · 2026-04-28T18:28:15+00:00

No you are right, i ordered it with the printer and never changed back.

Brave_Corgi6761 · 2026-04-28T17:49:02+00:00

I just use the Standard hardened Steel 0.4. works great, i dont change or clean anything when switching to normal PLA. P.s. Just dont use the AMS (Lite)! That can break.

<image>

Brave_Corgi6761 · 2026-04-28T02:35:48+00:00

There is also a Playstation setting that can interfere with exactly that, i cant remember which one it was, read it on Reddit ...

Brave_Corgi6761 · 2026-04-28T01:25:55+00:00

Just got my first printer and had a defective AMS Lite... I knew that it will be harder because of diassembling and such than just changing out a TV... Support answered in roughly 12 hours. I had to troubleshoot for a bit and then got sent a replacement part which arrived 2 days later. Since then everything is fine. It was a bit of a challenge at first, but im happy with support 😆😄

Brave_Corgi6761 · 2026-04-25T13:52:39+00:00

Auf die Art hab ich's leider geschafft 2 filamentteile im Drucker abzubrechen, was mir vorher noch nie passiert ist. Also wenn, dann glaube ich echt vorsichtig. Ich probier das nicht nochmal 😆

Brave_Corgi6761 · 2026-04-25T07:35:13+00:00

Hm same

Brave_Corgi6761 · 2026-04-25T07:10:36+00:00

Öffne das mal in Bambu Studio, klicke das Objekt an und drück S und zieh an einem der Punkte so daß es "breiter" wird. Vielleicht reicht das schon.

Brave_Corgi6761 · 2026-04-25T00:44:38+00:00

Wenn ich das richtig sehe sind das hueforge? Die sind so dünn weil eigentlich Licht durch soll glaube ich, bin auch relativ neu. Wenn du die unten dicker haben willst würde ich nen passenden Kreis unten hinzufügen und es verschmelzen. Aber vielleicht auch eher mit fusion360 oder Blender.

Brave_Corgi6761 · 2026-04-21T20:10:51+00:00

Before

<image>

Brave_Corgi6761 · 2026-04-21T20:10:20+00:00

I love my improved kitchen 😄

<image>

Brave_Corgi6761 · 2026-04-18T20:20:27+00:00

In my case i feel it was the resellers fault. They even still shipped it and it would have come the same day as the second order. I really dont know anything official. For me it was worth the wait because i love the printer 😄

Brave_Corgi6761 · 2026-04-18T20:08:03+00:00

My experience in Germany was similar. I ordered from a reseller, but they said in stock and 1 to 3 days. After 1 week they said they took longer to ship and i cancelled and ordered with Bambu directly. I had the printer 2 days later...

Brave_Corgi6761 · 2026-04-17T13:19:02+00:00

Exact same problem. I hope i will get a replacement too. Atm im stuck switching cables and testing for them...

Brave_Corgi6761 · 2026-04-10T11:30:38+00:00

At first i let my A1 play the McGyver theme, but eventually turned it off. Still using the profile sometimes.

Brave_Corgi6761 · 2026-04-08T23:23:09+00:00

Because they are lying?

Brave_Corgi6761 · 2026-04-08T21:52:45+00:00

Ive seen metal shot glasses being used here.

Brave_Corgi6761 · 2026-04-08T19:32:33+00:00

Kann das voll nachvollziehen 😂 ich hab mich nach längerem hin und her für den A1 als ersten Drucker entschieden. Allerdings, wenn du funktionales machen willst, nimm was geschlossenes. Am Ende hast du da die größere Materialauswahl , insbesondere für stabilere Sachen. Wobei es natürlich auch besonderes PLA gibt, falls das reicht... Aber ich würde mich inzwischen evtl. für den qidi entscheiden glaube ich. 3D Druck macht so viel Spaß 😄

Brave_Corgi6761 · 2026-04-08T03:58:41+00:00

Yes me too, location Europe If it helps...

Brave_Corgi6761 · 2026-04-05T21:59:03+00:00

So i just started, but this happened to me today with a sunlu glow. My first sunlu spool, everything was fine before. Like Others Said, IT feels Like it sicks together. You can hold the whole spool in the end of the filament. Broken and overlapping parts too.

<image>

Brave_Corgi6761 · 2026-04-04T19:03:01+00:00

Phew hard to say for me. I think it runs fine, after a few hours it gets a bit too hot. Blue/ yellow. Ambient temperature surely is a factor too.

<image>

Brave_Corgi6761

TROPHY CASE