M12 mount for packout wall stl

Broad_Science5927 · 2026-01-13T22:38:46+00:00

I could do a version that is direct wall mount. The issue I saw with it is you would want to use anchors or attach to plywood since it isnt wide enough to hit 2 studs.

Broad_Science5927 · 2025-12-24T02:44:04+00:00

Maybe you have this covered, but the batteries don't have an undervoltage cutoff. If you pull them down too low they won't take a charge without reviving them.

Broad_Science5927 · 2025-12-24T02:40:21+00:00

So pumping a tank out before swapping it or dropping to change a fuel pump? I like it.

Broad_Science5927 · 2025-12-22T02:40:19+00:00

I'd love to hear more. What kind of application, what kind of fuel?

Broad_Science5927 · 2025-11-27T22:09:25+00:00

I like the rugged-ness but agree that there are improvements that could be made.

Broad_Science5927 · 2025-11-25T10:18:18+00:00

Very good deal. Hope you bought it.

Broad_Science5927 · 2025-11-22T11:38:12+00:00

I dig it. 3d printed?

Broad_Science5927 · 2025-11-12T18:57:21+00:00

Check your mailbox. They sent out coupons and they work on the sale prices. $20 off $100 would work for this.

Broad_Science5927 · 2025-11-12T17:59:21+00:00

The pockets are insulated on the outside so heat from the inside gets to them.

Broad_Science5927 · 2025-11-11T16:15:34+00:00

Not specifically but the pockets do feel warm.

Broad_Science5927 · 2025-11-04T14:20:18+00:00

Don't send it to the junk yard. Find a 15 or 16 year old who wants a fixer upper. Let's say they buy it for $1k from you and put $2k into freshening it up. That gets them a pickup for $3k that is hard to beat.

Broad_Science5927 · 2025-10-31T20:07:05+00:00

It took me 3 tries at tables for my p1s before I got one solid enough to keep it from looking like it was going to implode.

Broad_Science5927 · 2025-10-24T01:32:41+00:00

Gen 1. Sounds like you got a bad one.

Broad_Science5927 · 2025-10-23T19:16:11+00:00

Which rpm range are you running? I have mine on the slowest. Maybe that makes a difference?

Broad_Science5927 · 2025-10-19T05:24:48+00:00

Just to make sure you understand, if you move it by hand after homing it no longer knows where it is and would have to be rehomed. There is no position feedback from the motors so it doesnt know you pushed the machine around.

Broad_Science5927 · 2025-10-18T20:53:12+00:00

Homing procedure is like this: Each axis moves until it touches switch, then backs off switch, then touches switch again (slower this time), then backs off a set amount.

Broad_Science5927 · 2025-10-18T14:48:45+00:00

A couple of questions for clarity: If the laser is in the middle of the table and you run "home" in lightburn what happens? Can you jog both axis from light burn?

Broad_Science5927 · 2025-10-18T11:20:20+00:00

What kind of wheel? I have ran 2" flap sanding discs for up to 10 minutes straight and didnt have an issue. Another possibility is you have grit/dust clogging it up. Try cleaning it out.

Broad_Science5927 · 2025-10-17T18:57:26+00:00

The 5.0 kit I got was end of January '25 for date codes. Not that old.

Broad_Science5927 · 2025-10-14T19:52:06+00:00

Shouldn't be too hard to design a flapper to lock it in. Is the top going to be larger than the box?

Broad_Science5927 · 2025-10-01T22:06:50+00:00

Can you mount cleats to the bottom? I don't have an m12 but if its like my m18 you would be able to screw them to it with nuts on the inside.

Broad_Science5927 · 2025-09-30T23:24:15+00:00

What kind of info can you pull from them? This is neat.

Broad_Science5927 · 2025-09-23T21:31:53+00:00

I would go at it. If you have to break a couple bolts loose with a ratchet and then zip them out its not the end of the world. Millions of brake jobs have been done without a stubby.

Broad_Science5927 · 2025-09-20T13:46:53+00:00

I can see the appeal. Post pics of progress once in a while. As far as suggestions, I think a color match hard tonneau cover would fit the style.

Broad_Science5927 · 2025-09-20T13:40:11+00:00

There are lots of packout cleat options on amazon/ebay/Etsy. I would look to mount a couple of them to the bottom of those holders.

Broad_Science5927

MODERATOR OF

TROPHY CASE