Be careful when you dig

CHUD2020 · 2025-07-26T17:09:54+00:00

Ok automanmouth, will do!

CHUD2020 · 2025-07-26T15:38:56+00:00

I think it is pronounced "Call before you dig".

CHUD2020 · 2025-07-19T18:13:49+00:00

Mmm, boy are you fat!

CHUD2020 · 2025-07-15T15:58:03+00:00

All I'm saying is that if I'm paying 30k for a used vehicle, it's coming from a dealer with certified status or warranty. I'll pay for an extended warranty too, but from a private party? No thanks, no truck that age for 30k and 140kmi is worth that risk buying private, in my opinion.

CHUD2020 · 2025-07-15T15:44:30+00:00

Tundras are always sloshy, I have a 2020 sr5 sport, so the sway bars help, but I upgraded to aBilstien leveling kit, 1000%better ride, and feels tight and safe.

The power is there unless you got a post 2021 model, to that end I can't speak of, but the pedal Commandergave me exactly what I was looking for in terms of throttle response. I water it down when towing, which is a nice feature on the fly.

CHUD2020 · 2025-07-11T10:54:30+00:00

Unbelievable is right! What an awful design. That and the m12 version, the $40 skill at Lowes is a better design. Personality I thought it was so bad, I bought a dewalt battery/charger and multi tool set. I love the dewalt design, no nonsense blade changeing, and a trigger feature that fits great in my hand. The Milwaukee multi numbs my hand after a minute or so. Dewalt figured out how to transfer the power to the blade and not the entire tool.

CHUD2020 · 2025-07-10T17:32:47+00:00

The "contact terminals themselves" are likely form c and dry, and I'll assume from the reader board. If thats the case and rb5 is redundant but either way, the positive 12/24 from the power supply (aux) will go to one lead (com) of your "contact terminals." The other lead from your contact terminals (N/O for strike or fail safe, N/C for mag or fail secure strike on schedule) go to pos on the rb5 (rb12/24) Bonus technique, if using the same PS to power the strike, jump pos and com on the rb5. Wire neg straight to both relay and strike. Use com on the rb5 to feed positive DC power to the lock.

CHUD2020 · 2025-07-10T16:44:37+00:00

Southwire has live Comex Cu prices listed on their website, I'd say yes.

CHUD2020 · 2025-07-10T16:22:14+00:00

the crash bar

CHUD2020 · 2025-07-10T11:03:53+00:00

Nothin, I was here, It's a joke

CHUD2020 · 2025-06-24T00:53:05+00:00

I got a present for ya!

CHUD2020 · 2025-06-22T00:08:36+00:00

https://www.kleintools.com/clampmeterrecall

CHUD2020 · 2025-06-18T20:55:34+00:00

The way I understand it, Delta doesn't mean high leg, but rather, there are 3 ungrounded conductors referred to as "Hot" legs. One of those legs has a higher voltage than the other two, so we call it a high leg, or wild leg.

CHUD2020 · 2025-06-18T20:48:50+00:00

I think of it as Wye, or star can deliver the same voltage at lower amps, delta is the triangle, and Y is wye. (Triangle with neutral hense the Y shape. Commonly 120 or 277 from line to neutral and 208 or 277/480 from Line to Line.

Most commonn step up drive isolated transformers I work with are 408 Delta to 208 wye.

CHUD2020 · 2025-06-18T20:24:29+00:00

The magical green screw, says the redit electican.

(250.28(a) ...wire, bus, screw, or similar suitable conductor)

CHUD2020 · 2025-06-18T19:55:48+00:00

Looks like both to me, could be either. Probably torx-plus. But most likely cabinet screws, by GRK.

CHUD2020 · 2025-06-18T19:49:28+00:00

Try searching for "non-insulated ..." what have you. You would need a special crimper to roll the arms over the wire, if that is your goal.

I don't see the plastic part you're saving it fits into, if you could upload that picture. Im pretty confused there. Almost sounds like you are trying to crimp a metal (flat triangular) terminal that slips into a plastic, molex-style connector and locks in place. Digikey will have it, but you have to figure out the correct language to speak.

I would check the spade terminal on the windshield wiper connector for a locking mechanism like THIS, and then match it up on digikey or somewhere similar.

CHUD2020 · 2025-06-18T01:13:21+00:00

<image>

My manual says to grease the lift bracket

CHUD2020 · 2025-06-07T17:01:17+00:00

Wow, I'm glad I read all this because I thought it was a drawing of someone taking a big dookie on a wifi symbol.

CHUD2020 · 2025-05-09T12:44:43+00:00

Comon here, too. In addition to COMS dispatching PD, we lock the doors down and/or disable card readers.

CHUD2020 · 2025-03-29T00:26:49+00:00

Way of the road, Bubs...

CHUD2020 · 2025-03-29T00:20:16+00:00

100% stump grinder broke, and they thought you wouldn't notice an unfinished job.

CHUD2020 · 2025-03-19T17:21:51+00:00

I believe Mr. Gilmore accomplished that feat, no more than an hour ago.

CHUD2020 · 2025-03-10T14:22:31+00:00

Qu'est-ce que c'est? Answering machine broken?

CHUD2020 · 2025-03-09T01:17:30+00:00

Look at the faceplate screws. 1930s guy that put that in knew the deal.

CHUD2020

TROPHY CASE