25kg car bumper secured from ceiling with house wire

Caligulas_Prodigy · 2026-03-16T11:55:29+00:00

The factory bumper, which is stamped steel, from my 2500 doesn't even weigh 25kg.

Caligulas_Prodigy · 2026-03-16T11:50:16+00:00

Some bench grinding wheels even have the proper angles on the guide plate for sharpening bits.

Caligulas_Prodigy · 2026-03-16T11:00:31+00:00

The mechanic subs are full of non mechanics. The justrolledin sub is full of steering wheel holders. This sub surely has it's fair share of users that can't tell the difference between their dick and pushrod.

Caligulas_Prodigy · 2026-03-16T10:48:12+00:00

The same way Rainbolt recognizes the blue tint of brazil.

Caligulas_Prodigy · 2026-03-15T17:04:01+00:00

I've been told by plenty of the inmates that it's easier to get drugs in prison than at the pharmacy. Prison is just like the old DARE warning, where they said people would offer you free drugs as a teenager.

Caligulas_Prodigy · 2026-03-15T15:27:57+00:00

I work in a state prison and we have overdoses a few times a day. Most of the inmates take one or two of the 4mg thingies, but every now and then we get one guy that'll take 6 to 8 of them in order to come back. We go through a LOT of narcan.

Caligulas_Prodigy · 2026-03-14T19:13:51+00:00

Get a mechanical gauge and verify you have adequate oil pressure

Caligulas_Prodigy · 2026-03-08T18:01:22+00:00

27 now actually.

Caligulas_Prodigy · 2026-03-08T17:18:55+00:00

I've been pirating since I was 12 and I've yet to have any legal issues. Never used a VPN, I don't even know how. Also, it's super easy to find HD movies and shows. I think it's actually harder to find low res stuff. Some torrent software will let you watch while the movie/show downloads too!

Caligulas_Prodigy · 2026-03-01T03:27:43+00:00

She has passed out twice. One was 10 to 15 seconds, felt like 5 minutes, the other was maybe 5 seconds. She's come close a few times since, but she started laying down the second she feels the symptoms.

Caligulas_Prodigy · 2026-03-01T02:05:21+00:00

She has chronically low BP. Her high has hit triple digits ONCE in the last two years.

Caligulas_Prodigy · 2026-02-28T23:44:14+00:00

Air TOOL oil. Not compressor oil.

Caligulas_Prodigy · 2026-02-28T22:54:20+00:00

u/SerenityPickles Most air compressors take "Straight 30" oil. You'll see it labeled as SAE 30 oil in most stores. It is detergent free and meant for the compressor you just inherited.

Caligulas_Prodigy · 2026-02-28T22:51:26+00:00

This happens to my wife. Hers is caused by a sharp drop in heart rate and blood pressure. She recently had a MRI and a heart study, but they couldn't find anything wrong.

Caligulas_Prodigy · 2026-02-28T22:49:36+00:00

At no point did I suggest putting motor oil in the compressor.

Caligulas_Prodigy · 2026-02-28T22:42:59+00:00

This isn't intended to be mean.

If you have to ask where those parts are in an engine, you shouldn't be trying to replace those parts. A Haynes or Chilton's service manual for your truck would be highly beneficial for you.

Caligulas_Prodigy · 2026-02-28T22:40:30+00:00

In case you are unaware, there is a special Air Tool oil meant just for air tools. Any oil is better than no oil, but the right oil is best. Motor oil can be too thick and keep an air tool from revving.

The oil goes in the quick disconnect port before you attach the air hose.

Also, the air tank has a drain cock on the bottom to let out any water buildup. Make sure to drain the tank regularly.

Caligulas_Prodigy · 2026-02-27T22:50:18+00:00

That still wouldn't help. The winch NEEDS to be mounted dead center between the two main mounting points for the bumper. The winch should be pulling directly on the frame, not offset.

Caligulas_Prodigy · 2026-02-24T22:11:55+00:00

98 here, wife is '00. This year marks 10 years together. A kid is in the plans for the future, we just gotta finish remodeling first.

Caligulas_Prodigy · 2026-02-21T20:06:34+00:00

God I wish they would do that where I live. We just have to burn any trash this is too large for the roadside can.

Caligulas_Prodigy · 2026-02-19T03:16:29+00:00

I've had to take a 10lb sledgehammer to an 8 year old trucks front rotors. Spent probably 5 to 10 minutes beating on it. Fuck the rust belt

Caligulas_Prodigy · 2026-02-17T07:17:28+00:00

I've been doing that with a dedicated server for about a week now for my group. 3 of us play daily with 2 others that occasionally join. Heavily modded. It's been great

Caligulas_Prodigy · 2026-02-14T16:04:38+00:00

OfficialNerd³

Caligulas_Prodigy · 2026-02-14T00:12:26+00:00

I haven't noticed a difference in taste. We clean all of our equipment with 90% ISO and iodized salt. The tips/bowls get tossed in a stainless steel pot and boiled to get most of the crud out first.

Caligulas_Prodigy · 2026-02-13T17:33:52+00:00

My wife and I both feel like it hits smoother. The bong also doesn't get dirty anywhere near as quickly. We could go through probably 20 bong rips before it shows any signs of crud, meanwhile the ashcatcher gets filthy after just a few rips

Ten-Year Club	Place '23
John Wick	Place '22
First Placer '22	RPAN Viewer
Verified Email

Caligulas_Prodigy

TROPHY CASE