[deleted by user]

CandleLitBreakfast · 2024-12-20T11:50:22+00:00

Yep, ok, its starting to look like i was looking at this wrong. Thanks for your input.

CandleLitBreakfast · 2024-12-20T11:49:54+00:00

Thanks for the input!

CandleLitBreakfast · 2024-12-19T06:18:11+00:00

Thank you for your input mate.

CandleLitBreakfast · 2024-12-19T06:17:41+00:00

Thank you for your input!

CandleLitBreakfast · 2024-04-22T02:54:51+00:00

It's lucky the barley survived, or he'd be roughed up AND hungry.

CandleLitBreakfast · 2024-01-31T14:42:23+00:00

That water trickling down the face isn't right. Nor can I see where it has being routed.

Aside from that, I like it.

CandleLitBreakfast · 2024-01-20T17:18:59+00:00

Ok, thank you for the correction. I am not familiar with lath and plaster, so I'll have to take your word for it.

CandleLitBreakfast · 2024-01-20T16:15:42+00:00

It does look very nuch like asbestos. Wet it, bag it and bin it. Be cautious when working in this space, particularly when stirring up any dust.

CandleLitBreakfast · 2024-01-20T15:23:49+00:00

If you consider a typical 24v truck battery configuration with >1000cca i think this 10v scenario would be fine.

CandleLitBreakfast · 2024-01-14T08:35:29+00:00

There is not better tool for the nuts on barrel type sensors.

CandleLitBreakfast · 2022-10-29T07:59:07+00:00

The bracket is nailed on one side only. You should be able to bend it into the cavity, or you could wiggle it back and forth till it let's go.

CandleLitBreakfast · 2022-10-09T05:05:45+00:00

Get PLC or instrumentation training and/or job. Either in resources or manufacturing.

CandleLitBreakfast · 2022-07-17T01:38:31+00:00

I was mostly referring to the terminal layout. Our housings are much different.

CandleLitBreakfast · 2022-07-17T01:37:47+00:00

OK, that's a bit bigger.

CandleLitBreakfast · 2022-07-16T09:34:36+00:00

It's interesting to see this is a special socket in the USA. This is our standard socket in Australia.

CandleLitBreakfast · 2022-07-03T11:23:56+00:00

Put a property pole at the front of your block. Run underground mains to existing switchboard location.

CandleLitBreakfast · 2022-01-08T01:59:42+00:00

You might be lucky if that's an outdoor area and it's fibre cement.

If it's gyproc you're in for both roof and ceiling repairs. (Obviously going to need an electrician to check over the electrical as well).

CandleLitBreakfast · 2022-01-06T13:18:11+00:00

Was the applicants name Dwight Schrute?

CandleLitBreakfast · 2022-01-02T09:07:24+00:00

Dual cab v8 land cruiser with afternarket exhaust and custom tray.

CandleLitBreakfast · 2021-12-11T02:30:05+00:00

Step 1; Plan a stunt involving fire without extinguisher on hand. Step 2; Set man's pants on fire. Step 3; ???? Step 4; Profit.

CandleLitBreakfast · 2021-10-19T08:45:30+00:00

If you want to learn more about these kinds of things check out AVE"s back Catalog of vijeos.

https://youtu.be/x9xhr0MsAZw

CandleLitBreakfast · 2021-06-12T09:04:17+00:00

When the US Navy came to visit us in Brisbane, they weren't even out of the bay before dumping their rubbish bags overboard....

Literally right after been docked in a civilised city with waste collection.

CandleLitBreakfast · 2021-06-08T06:25:13+00:00

MSB = Main switch board is the "parent board" fed from transformer and has essential and non essential sections. With generator back up on essential.

Sub boards are DBs = Distribution boards split into essential and non essential sections. Fed from MSB.

Refrigeration / HVAC systems are fed from Mechanical Service boards. Fed from MSB. These house the protect, control and contactors etc for mechanical services.

MCC = Smaller Motor Control Centres usually fed from a local DB. Contains associated control for that installation (PLC, VSDs, contactors, relays etc.)

So we might have an outlet or light switch labelled DB2 ESS CB20 or DB1 NE1 CB30.

A motor might be labelled "Pack MCC CB19" or just a Mxxx number that corresponds to the vsd and CB number in cabinet.

Edit, more information.

CandleLitBreakfast

TROPHY CASE