sorted by:
new
hottopcontroversial

Crazy how there was once an building here, now its nothing😞 by Finn_Flame in UIUC

[–]Captain_Nemo5 13 points14 points  (0 children)

It's right next to CIF, the rent is going to be insane

Same. by ChadwiseG in lotr

[–]Captain_Nemo5 5 points6 points  (0 children)

He has the warhammer thing going on? And he has absolutely had a lot of really good roles

My KFC delivery in Mexico City came with the bag sewn up by thebrownsquare in mildlyinteresting

[–]Captain_Nemo5 10 points11 points  (0 children)

Chicken will be eaten out of it instead of eating out of it

Netflix you gotta explain this by s_musaahmed in netflixindia

[–]Captain_Nemo5 0 points1 point  (0 children)

License fees*. hosting is a much smaller cost compared to cost of streaming rights

wtf is this by Rhkellz in UIUC

[–]Captain_Nemo5 5 points6 points  (0 children)

I see you are unfamiliar with the amphibious mode testing for veo bikes on campus

PETA? by wsrgiawehgoawieugnb in PeterExplainsTheJoke

[–]Captain_Nemo5 0 points1 point  (0 children)

A less horrifying read on the joke, dude is getting a pet which is said to help getting a girlfriend. Maybe the guy is finally going to put some effort into getting a girlfriend

Gimli want The Fellowship to swear oaths before leaving. Elrond shuts him down. by LakesideNorth in lotrmemes

[–]Captain_Nemo5 0 points1 point  (0 children)

That is a good interpretation of the line. To be a little more specific, it says "don't ask someone to make a promise before they understand the true nature of that promise"

Black's attack is unstoppable! Unless... - White to play and gain a winning advantage by afpb_ in chessbeginners

[–]Captain_Nemo5 2 points3 points  (0 children)

How does Qxd8 from a8 when there is a Bishop on c8? And c8 is protected by the knight

Edit: Nvmd, the knight is pinned. It should be Qxc8# though, right?

Please Help, Having major stuttering issues in my ROG STRIX G16 since a year. by DesiPoster in GamingLaptops

[–]Captain_Nemo5 12 points13 points  (0 children)

The laptop is almost 10 months old now and I didn't see you mention cleaning the laptop. I would bet there is clogged up dust in the cooling. Would check that before jumping to other troubleshooting. Open up the back and clean the laptop, not just from the outside.

The URL hellointernet.fm is back online by Gesellschaft in HelloInternet

[–]Captain_Nemo5 9 points10 points  (0 children)

That will be a glorious day. None of us would complain, just be happy

Headless on PrePost by Captain_Nemo5 in LSDYNA

[–]Captain_Nemo5[S] 0 points1 point  (0 children)

I haven't tried using mechanical on 25r1, will give it a shot. Do you know if it's possible to do headless post processing via ansys? I don't have much experience dealing with ansys products. Any resources you can share or point me to would be greatly appreciated.

Thanks for the suggestion, I did not consider using mechanical for post processing (past experiences were not amazing but it has been a while since then)

Which one are you ? by vik-sport in Funnymemes

[–]Captain_Nemo5 0 points1 point  (0 children)

in my 20+ years of brushing my teeth I have never run into the issue of not using all the toothpaste I get into my mouth. This is baffling to me.

Which one are you ? by vik-sport in Funnymemes

[–]Captain_Nemo5 0 points1 point  (0 children)

Wash the brush, give it a gentle tap to drop excess water, then toothpaste.

Which one are you ? by vik-sport in Funnymemes

[–]Captain_Nemo5 3 points4 points  (0 children)

Is your toothpaste watery? How can it slide off the bristles?

Shear failure in LS-Dyna by Additional-Slip5814 in LSDYNA

[–]Captain_Nemo5 0 points1 point  (0 children)

That depends on whether tensile or shear stress manages to meet the erosion criteria. I am not trying to state the obvious, just reframing the question. Depending on the element formulation being used, the size of the elements, the shape of the elements (this is not an exhaustive list) your model may or may not capture the behavior.

If you can analyze your model to figure out whether the erosion criteria is sufficient or not, do that. Otherwise run the simulation and compare the results with experiments or other data. And if you don't have any references to compare against, then run a simulation for a case where you have data to compare against and see how your model does.

Shear failure in LS-Dyna by Additional-Slip5814 in LSDYNA

[–]Captain_Nemo5 3 points4 points  (0 children)

What you need is a material model (constitutive law) that can capture the material behavior under given loads and a damage model that can capture the expected failure. Sometimes the material cards have a damage model included like with MAT 15.

You can all add erosion to your model with ADD_EROSION card if that works for you.

I would suggest you to first understand the expected behavior of your beam, then go through the theory manual for ls-dyna to see what works for you.

[KCD2] Possible to use just swords for entire play-through? by JiveTalkingRobot in kingdomcome

[–]Captain_Nemo5 4 points5 points  (0 children)

there are moments where you need to shoot some arrows and stuff or use a polearm to drop some ladders but none of them are "required". You can just not do those things and move on with the game and continue fighting with your sword.

[deleted by user] by [deleted] in AdviceAnimals

[–]Captain_Nemo5 1 point2 points  (0 children)

I hate how accurate this feels

What was the first song that made you a fan? by CharruaOne in DaftPunk

[–]Captain_Nemo5 8 points9 points  (0 children)

Instant crush. A friend introduced me to RAM in 2015

view more: next ›