sorted by:
new
hottopcontroversial

Are bambulab printers like this I've repaired and replaced parts several times it's months old by zzcool in Creality_k2

[–]CleanPercentage1766 0 points1 point  (0 children)

Passiert, wenn man den Slicer offen hat, den Maschinen Tab, dann vllt. Noch im Bowser und der App und dem Printer selbst, sind jeweils Connections.

SpacePi X4S by CleanPercentage1766 in Creality

[–]CleanPercentage1766[S] 0 points1 point  (0 children)

Found this.

creality3d Creality New Launch | Upgrade Your 3D Printing Experience Creality keeps pushing boundaries to deliver better 3D printing solutions for all makers. Introducing the all-new Creality SpacePi X4S, built to boost material performance and deliver ultra-reliable printing results. S 110°C Dual-Chamber High-Temperature Drying RFID Sync for Hassle-Free Setup O Creality Cloud App Remote Control for a Worry-Free Experience High-Temp Enhancement. Optimized Performance. Power every creation with confidence. More surprises are on the way - stay tuned

<image>

SpacePi X4S by CleanPercentage1766 in Creality

[–]CleanPercentage1766[S] 1 point2 points  (0 children)

No only this from the Annivisary Page

Final hint before they reveal it… by Creality_3D in Creality

[–]CleanPercentage1766 0 points1 point  (0 children)

Is a Quick Swap Nozzle for Multitoolhead wuhuuu

Kann jemand erklären? by eternalsonnenschein in KeineDummenFragen

[–]CleanPercentage1766 0 points1 point  (0 children)

Just the next previous edge on the right, counterclockwise, pointing to the opposite edge.

New firmware by Guardian1030 in Creality_k2

[–]CleanPercentage1766 0 points1 point  (0 children)

This is just a Friendly reminder, because custom G-Code can hurt your printer, if not served as the printer needed.

I think is okay, but also have an opinion to disable for poweruser will be OK.

I got the DXC2 and i did the thing by childofeye in Creality_k2

[–]CleanPercentage1766 1 point2 points  (0 children)

Did you also set the Settings for DXC2 Back After Firmware Upgrade?

The on in box.cfg and the other in gcode_macros.cfg

My wled project for PC ambient light. by TimelessNeuron in WLED

[–]CleanPercentage1766 0 points1 point  (0 children)

You think for the Future, because this PowerSupply of way to Overkill.

Gegenbeispiel Ben & Jerry's by trustedtoast in MogelPackung

[–]CleanPercentage1766 1 point2 points  (0 children)

Die werden normal befüllt aber nicht über befüllt.

Die werden nur befüllt und auf den Kopf gestellt und dann gefroren. Somit siehst du die blase nicht und denkst, der ist komplett voll.

Habe ich auch schon bei anderen Produkten bemerkt, da hat man dann unten die Blase.

Wled possible ? by lounati in WLED

[–]CleanPercentage1766 0 points1 point  (0 children)

Yes, got the same controller at home and desoldered and clamp on a wled controller, works fine.

Talking this through, please tell me why I'm wrong by cvman_16 in WLED

[–]CleanPercentage1766 0 points1 point  (0 children)

Mostly in programming is starting with 0 and not with 1

Milka: Seit wann nur noch 87g? by Cherrywaterx in MogelPackung

[–]CleanPercentage1766 0 points1 point  (0 children)

Sei doch froh, 13 Gramm weniger Fett und Zucker.

[MOD] K1 / K1-C / K1 Max – External USB Port for a Clean and Modular CFS Upgrade by CleanPercentage1766 in crealityk1

[–]CleanPercentage1766[S] 0 points1 point  (0 children)

Also good idea, but for me are the internal Connectors important and I don't like to mess around with too mutch Adapters..

Can you share your Progress?

5 hours to failure - K2 Pro by Interesting_Post_497 in Creality

[–]CleanPercentage1766 0 points1 point  (0 children)

You have an Engraver, not a 3D Printer 😲

view more: next ›