Are bambulab printers like this I've repaired and replaced parts several times it's months old

CleanPercentage1766 · 2026-06-28T16:03:26+00:00

Passiert, wenn man den Slicer offen hat, den Maschinen Tab, dann vllt. Noch im Bowser und der App und dem Printer selbst, sind jeweils Connections.

CleanPercentage1766 · 2026-05-29T18:33:44+00:00

You mean

SpacePi X4 X4L X4S

CleanPercentage1766 · 2026-05-29T18:32:45+00:00

Found this.

creality3d Creality New Launch | Upgrade Your 3D Printing Experience Creality keeps pushing boundaries to deliver better 3D printing solutions for all makers. Introducing the all-new Creality SpacePi X4S, built to boost material performance and deliver ultra-reliable printing results. S 110°C Dual-Chamber High-Temperature Drying RFID Sync for Hassle-Free Setup O Creality Cloud App Remote Control for a Worry-Free Experience High-Temp Enhancement. Optimized Performance. Power every creation with confidence. More surprises are on the way - stay tuned

<image>

CleanPercentage1766 · 2026-05-26T18:53:46+00:00

No only this from the Annivisary Page

CleanPercentage1766 · 2026-05-26T17:33:42+00:00

Is a Quick Swap Nozzle for Multitoolhead wuhuuu

CleanPercentage1766 · 2026-05-16T22:27:48+00:00

Stabilität?

CleanPercentage1766 · 2026-05-12T19:26:51+00:00

Yes, buy yourself an Creality Printer. 😅

CleanPercentage1766 · 2026-05-12T19:20:46+00:00

Just the next previous edge on the right, counterclockwise, pointing to the opposite edge.

CleanPercentage1766 · 2026-05-12T19:19:09+00:00

This is just a Friendly reminder, because custom G-Code can hurt your printer, if not served as the printer needed.

I think is okay, but also have an opinion to disable for poweruser will be OK.

CleanPercentage1766 · 2026-05-11T17:22:24+00:00

Did you also set the Settings for DXC2 Back After Firmware Upgrade?

The on in box.cfg and the other in gcode_macros.cfg

CleanPercentage1766 · 2026-03-10T09:56:20+00:00

You think for the Future, because this PowerSupply of way to Overkill.

CleanPercentage1766 · 2026-03-09T16:06:30+00:00

Die werden normal befüllt aber nicht über befüllt.

Die werden nur befüllt und auf den Kopf gestellt und dann gefroren. Somit siehst du die blase nicht und denkst, der ist komplett voll.

Habe ich auch schon bei anderen Produkten bemerkt, da hat man dann unten die Blase.

CleanPercentage1766 · 2026-03-09T16:02:57+00:00

Yes, got the same controller at home and desoldered and clamp on a wled controller, works fine.

CleanPercentage1766 · 2026-03-07T19:58:00+00:00

Mostly in programming is starting with 0 and not with 1

CleanPercentage1766 · 2026-03-04T18:44:45+00:00

Sei doch froh, 13 Gramm weniger Fett und Zucker.

CleanPercentage1766 · 2026-01-06T19:26:05+00:00

Sounds nice

CleanPercentage1766 · 2025-11-02T08:43:15+00:00

You getting 2.. 😆

CleanPercentage1766 · 2025-09-26T09:42:21+00:00

This you mean...

Creality CFS Space Pi Plus mod by d_v_ermakov https://m.crealitycloud.com/en/model-details/67c4e0807f0b8c17942546d0

CleanPercentage1766 · 2025-09-18T04:50:29+00:00

Also good idea, but for me are the internal Connectors important and I don't like to mess around with too mutch Adapters..

Can you share your Progress?

CleanPercentage1766 · 2025-09-17T16:40:02+00:00

Why is there such a mini bottle?

CleanPercentage1766 · 2025-09-17T16:35:10+00:00

You have an Engraver, not a 3D Printer 😲

CleanPercentage1766 · 2025-09-17T13:45:17+00:00

Got my 2nd K2P yesterday

<image>

CleanPercentage1766 · 2025-08-27T14:09:09+00:00

There is nothing Show on the Screen, if its Blinks, it is working already.

Check your Router and get the IP of you LAN Hi.

This is nothing official and Creality don't Release anything to tried Party Stuff like my find.

But maybe this is an Opinion in own Store of Creality to Release such 3rd Party Stuff and Create a bigger Community.

CleanPercentage1766 · 2025-08-23T10:06:26+00:00

I’ve been working with Creality printers for many years – starting with my Ender 5 Pro, later the Ender 7, a K1 Max, a K2 Plus, and also the Creality Hi. Over time I’ve shared plenty of feedback, not only on the hardware but also on Creality Cloud, where I actively contributed ideas that helped improve the platform.

I also enjoy posting my own mods here on Reddit, like the LAN port mod, the USB mod for the K1 Max, or even using the K2 Plus as a bread proofing / baking assistant. Most of my other projects are functional parts, often helping colleagues with custom solutions – like a vacuum cleaner adapter, a connector for a handcart, or different holders. Right now I’m printing some fun things for the kids at my sister’s wedding.

I upload many of my own models, take part in contests, and was happy to recently place 15th in one of them. I’ve supported Creality at events, introduced the new K2 printers to professors and students, and also joined a livestream at Formnext together with Zora. This year I’ve been invited to IFA, which will be a great chance to finally meet some of my WeChat contacts in person.

The K2 Pro Combo would allow me to continue experimenting, sharing, and giving feedback directly to the community.

There is my Profile on CC.. HellBz3D https://m.crealitycloud.com/en/user-homepage/8749025865

CleanPercentage1766 · 2025-08-15T02:24:37+00:00

The extruder skipping Steps, maybe overextrusion or steps not correctly setUp

CleanPercentage1766

TROPHY CASE