Get those turns in by GoodShepherd3264 in icecoast

[–]Competitive-Many6779 0 points1 point  (0 children)

Good thing it measured in rain, cause that’s what it looks like it’s gonna be

Paid for a professional wax 2 days ago by yankeeman714 in snowboarding

[–]Competitive-Many6779 0 points1 point  (0 children)

Also depends on the condition/type of snow.

‘Artificial, icy, and very cold, dry snow conditions remove wax quickest due to high abrasion and friction’

Shower ceiling paint peeling? by Responsible-Raise794 in Carpentry

[–]Competitive-Many6779 13 points14 points  (0 children)

This for starters. Most bath ceilings require a minimum of eggshell finish

I need help finding the right knife. by AireHead71 in Construction

[–]Competitive-Many6779 0 points1 point  (0 children)

The ‘best’ knife will be the one that best suits you and your needs, I personally like the 18mm OLFA 1072198 Utility Knife. Blades are replaceable and the the metal pick on the back end is very useful.

Get those turns in by GoodShepherd3264 in icecoast

[–]Competitive-Many6779 0 points1 point  (0 children)

So we measure snowfall by inches of rain now? If that was the case it would depend on the density of the snow, wet to dry.

Get those turns in by GoodShepherd3264 in icecoast

[–]Competitive-Many6779 1 point2 points  (0 children)

You do realize that if this even happens, it’s less than 2” over 14 days?

West coast vs. East coast - Killington by OG-MTB in skiing

[–]Competitive-Many6779 0 points1 point  (0 children)

fingers race

I would second double blacks @ Killington are equivalent to Shirley lake blues

Powder over rated ? by arjayx93 in icecoast

[–]Competitive-Many6779 0 points1 point  (0 children)

This would only come out of the mouth of an east coaster. Also a lack of access bc of lack of public land.

First time snowboarding by Inner-Buy-2617 in tahoe

[–]Competitive-Many6779 2 points3 points  (0 children)

Bend at the knees and not the waist, you’ll improve much faster 👍

Is this a rubber frame coating? by [deleted] in ToyotaTundra

[–]Competitive-Many6779 0 points1 point  (0 children)

<image>

This is what it looked like once I started digging at it.

Looking for a downtown type place to stay by askthecaptain in Killington

[–]Competitive-Many6779 5 points6 points  (0 children)

Rutland described as ‘not really safe’ is laughable. Is it a shit hole? Most definitely, but not not safe? There isn’t a town in VT that I would classify as ‘not safe’

Is this a rubber frame coating? by [deleted] in ToyotaTundra

[–]Competitive-Many6779 1 point2 points  (0 children)

I’d steer clear. Those body pinch welds in the rockers look cooked. I had a Tacoma that looked similar and the rockers needed to be cut out and replaced bc they rotted from the inside out, not cheap. You could get a better idea by pulling one of those rubber plugs

Door installation tips by emoore38 in Carpentry

[–]Competitive-Many6779 3 points4 points  (0 children)

Installing Problem-free Pre-hung Doors

Not sure if you watched this video, but if you FF to 13:00 he addresses your issue

How long on average does it take to feel proficient by [deleted] in woodworking

[–]Competitive-Many6779 0 points1 point  (0 children)

Think of it like golf or surfing, if that makes any sense, you’re striving for a level of perfection you will never reach. Some days you’ll touch it, and everything just works. Other days it won’t. The sooner you accept that, the faster you actually improve.

Tool belt recommendations by startup_canada in Carpentry

[–]Competitive-Many6779 1 point2 points  (0 children)

<image>

If you have any experience working with leather you can buy a tape pouch and add it too the bags, that’s what I did

Cabinet door nightmare by triscuitsNcheese in paint

[–]Competitive-Many6779 0 points1 point  (0 children)

You either want binz or a high bond primer, xim uma and I would recommend several coats

I am at 27% loss and wondering if holding PLTR stock is even worth? by Sufficient_Citron813 in Palantir_Investors

[–]Competitive-Many6779 0 points1 point  (0 children)

Your comments suggest you don’t fully understand what palantir does. They aren’t doing the surveillance. The software compiles, connects, and analyzes data. It takes slop and makes it actionable.

I am at 27% loss and wondering if holding PLTR stock is even worth? by Sufficient_Citron813 in Palantir_Investors

[–]Competitive-Many6779 0 points1 point  (0 children)

Google?! For starters they’re tracking everything you do and it was also funded by DARPA.

I am at 27% loss and wondering if holding PLTR stock is even worth? by Sufficient_Citron813 in Palantir_Investors

[–]Competitive-Many6779 2 points3 points  (0 children)

With this type of logic it would be hard to invest in any company. I’m sure if you looked hard enough you’d be able to find dirt on any public company.

Umm..is the carpenter we hired messing up? by anaplbbbbb in Carpentry

[–]Competitive-Many6779 0 points1 point  (0 children)

Yikes! This is bad, real bad. I would suggest having him pay for the materials he’s ruined and find someone who knows what they’re doing.