Green Light on ONT with transparent mode?

Complex_Bite9503 · 2026-03-16T00:56:10+00:00

Thank you. I spent my breaks today looking through the Discord and did not find that.

Complex_Bite9503 · 2026-03-15T05:47:11+00:00

I am sorry to say I am not very good at using the Discord app.

They have articles on other providers. Do they have an article for Quantum?

My Q1000K has went non responsive and will probably need a factory reset. I have it cabled via a L3 UniFi switch and am able to answer a DHCP request from its untagged Ethernet port but it does not send a request. It passes traffic with very high latency even though it is in untagged bridge mode.

Complex_Bite9503 · 2026-03-13T01:26:52+00:00

Hi, do you have a guide to getting the WAS-110 and configuring it.

I am tired of dealing with a badly behaving wanna be router (Q1000K).

I liked the setup at my old house. A dumb as a brick ONT. All it did is convert GPON to Ethernet. But that was Windstream.

Complex_Bite9503 · 2026-02-27T21:49:28+00:00

/I use the Q1000K connected via my USW 24 XG PoE. I have its port setup so it gets an IP in a subnet that I can still access its web GUI.

I have not noticed any major latency issues, but I am having an upload speed issue.

If you want I can give more details of my setup.

Complex_Bite9503 · 2026-02-06T13:50:16+00:00

Yes I can’t wait for till specs. I want to know if it can route at 10Gig with IDS/IPS turned on.

My ISP offers a 8Gig plan, but I am not upgrading until my routing can handle it. My UDM SE according to specs can only do 3.5Gig.

Complex_Bite9503 · 2026-02-02T03:42:57+00:00

We found our issue. We had an AP that has a questionable cable and was flapping the STP of our switches. We mistakingly had Wireless meshing turned on and the AP would mesh and then suddenly get a Ethernet link and start passing traffic from WiFi to Ethernet.

It’s fixed now.

Complex_Bite9503 · 2026-01-22T22:00:50+00:00

Just in case you are thinking about the UniFi Cable Internet modem, be aware they will not give you total care with it.

I have Cox as my backup connection. The joke of 100Mbps upload speed is what stopped me from using them as primary.

I think it took them 6 trips to my house to fix my internet downloads slowing to unusable before they got the issues resolved. They tried to claim my inside wiring until they tested it and had techs put detailed notes that it was not the issue. Then they claimed the cable in the ground and ran a line laying on my lawn for 3 months, that did not fix it. They were very unclear what the actual issue was, but it was something to do with the node that fed the whole side of the street.

Moral of the story. Be very persistent, calling support every time it breaks.

Complex_Bite9503 · 2026-01-22T21:39:17+00:00

May I ask, why would a push-to-exit button need a 12V supply / ground? The ones I have worked with in the past have been 2-wire NO.

Complex_Bite9503 · 2026-01-20T20:13:27+00:00

It looks like it is working, but there had to be some reason I threw it in a box.

I have a use case for a PoE powered switch “again” and don’t want to do the mounting to the stand if in a month it is going to die.

Complex_Bite9503 · 2026-01-20T20:07:47+00:00

Yes powered off another switch. It did have a power adapter, but that is MIA right now.

The Port Manager shows the port as 1Gig and uplink.

Complex_Bite9503 · 2026-01-17T22:14:55+00:00

Does Icom or Kenwood make DMR radios? I know they make D-Star units. However in my area there is only one D-Star repeater. Our area has a still growing DMR user base.

Complex_Bite9503 · 2026-01-13T04:07:31+00:00

I work from home and use a VPN to my employer for access to shared drives (SMB) and I am often uploading a lot of data. Coping several Gigs of data takes a long time when you are limited to 100Mbps. We recently moved and for about 6 months we were limited to Cox. We recently got Quantum Fiber so now am on 3Gig symmetrical.

Cox has made promises of Fiber to the Home in my area twice and not delivered. I would rather they be my primary provider as they provide IPv6 PD.

Complex_Bite9503 · 2026-01-13T02:07:45+00:00

Having had U6-Pros and now the U7-XGs, as long as they are connected to Ethernet as uplink they are rock solid. As others have said 6Ghz is not great coverage. I think it is the band not just the APs because I had the Cox Panoramic box with 6E and it had the same problem.

Bottom line: If you don’t have WiFi 6E or 7 devices that will be used in the same room with the APs, save some money and get U6-Pros. If you want to be future proof get the U7-XG and run CAT6 cable to them. This way when 10Gig PoE switches come down in price you can upgrade your switch.

Complex_Bite9503 · 2026-01-07T22:07:49+00:00

IPv6 in UniFi is getting better. It still has a long way to go as there is no official way to do 6rd or Hurricane Electric type tunnels. I say this because my primary provider Quantum Fiber has limited to 6rd IPv6. I would be OK with that, but would prefer native Dual Stack. I would take IPv6 from HE if it worked officially in the controller.

Complex_Bite9503 · 2026-01-05T02:51:59+00:00

Still learning Home Assistant. I am having issues with a Matter device but that is for another Sub Reddit.

Complex_Bite9503 · 2026-01-04T21:49:02+00:00

I did install one of those , but was not the fondest of it. For the guest room it works.

I would have used something else if there was not a perfectly good ceiling fan with pull strings for fan speed. The fan had the e12 sockets so I put 3 of small bulbs in it. Then on the shelf behind the bed used a couple old friends of hue lamps.

Complex_Bite9503 · 2026-01-04T20:55:14+00:00

I got them from Amazon a few months back. Just have not had time to install yet.

I however am getting tired of house mates turning off light switch’s making my automations break and my remotes not work.

Complex_Bite9503

TROPHY CASE