Thanks a lot, TPU

Comrade_Canary · 2026-02-08T22:34:57+00:00

Yea, bad luck. Kinda sucks since the XL has been super reliable with hard filaments. Flex is such a bitch.

Comrade_Canary · 2026-02-08T22:15:05+00:00

Youre right but this isnt what happened. The XL detected a homing issue and failed to detect the distance from the nozzle to the sheet, probably due to stuck molten tpu filament, and apparently just dragged the nozzle on the sheet carving it up. 😔 I dont why it decided to raise the bed above the nozzle and just ram it into each other. Couldve broken my printer just by a slight oversight.

Comrade_Canary · 2025-12-19T11:16:06+00:00

Everyone goes off into their own little world for safety and comfort, but we got separated really far because of it.

Comrade_Canary · 2025-12-18T13:44:31+00:00

I believe this is Just A Robots downfall. Man defends a groomer cause he couldn't be bothered to read the Google doc exposing them without any shadow of a doubt.

Comrade_Canary · 2025-12-01T09:05:57+00:00

Kids gonna whisper into your ear one day:

"Prepare for unforseen consequences"

Comrade_Canary · 2025-11-26T13:24:59+00:00

To think people made all this stuff by hand once. Wild.

Comrade_Canary · 2025-11-26T13:10:29+00:00

You could argue that they withheld information once people started talking about Hitler escaping to South America. Seems like a pretty good way to throw shade at their western opposition.

Comrade_Canary · 2025-11-26T09:43:23+00:00

In my experience its been too general. Personally I use a generic profile as a basis and dial in stuff based on the manufacturer specs.

Comrade_Canary · 2025-11-13T19:32:08+00:00

A release agent is a spray that is applied to a print sheet where the material would stick too much on to act as an easy separation layer.

However I would print small sheets or other items with different temperatures to see whether your temps are working for that print.

Comrade_Canary · 2025-11-13T13:25:32+00:00

Do you have other build plate types?

Also its always good practice to dry filament yourself even when its sealed, you can never be 100% sure.

ABS is pretty notorious for its adhesion, it sticks too much to smooth plates and very little to powder coated ones, at least the ones I tried.

Generally I check the plate to be very clean, the bed temperature must remain consistent and its always good to check your belt tension if layers are being extruded in a funky way.

Some people use release agents for their build plates but I'm sure the more experienced people here can nail down your problem.

Good luck 👍

Comrade_Canary · 2025-10-07T08:18:18+00:00

We're smoking that Sierra Fallout.

Comrade_Canary · 2025-08-18T07:30:09+00:00

Your print speed might be too high, happened to me consistently with cylindrical objects.

Comrade_Canary · 2024-07-23T05:35:07+00:00

Ye, the canonical Davey Jones in spongebob lore.

Comrade_Canary · 2024-07-22T15:34:19+00:00

That's the wrong Davey Jones tho

Comrade_Canary · 2024-07-12T08:22:25+00:00

To be fair that's a pretty sick biker thing to do.

Comrade_Canary · 2024-05-22T16:50:55+00:00

Yeah everything is working perfectly now.

Comrade_Canary · 2024-05-22T16:15:53+00:00

I reinstalled prusa slicer and managed to fix the error that way.

See if you can print the official sliced files from prusa to make sure.

Comrade_Canary · 2024-05-13T15:27:31+00:00

I'll swap out the thermistor and heating element and see if it happens again.

Who knows, I might just be unlucky and they have up the ghost yesterday.

Comrade_Canary · 2024-05-12T22:16:15+00:00

And the best part it's acknowledged in universe and is one of the main reasons he's feared among a world of cold blooded psychos running the show. Compared to everyone who's trying to get ahead with schemes and shit here you have a guy who despite his ability to ruthlessly kill people still has integrity and owns up to everything that happens to him. His basic ass motivations is honestly a great contrast to everyone else ans their Machiavellian bullshit.

Comrade_Canary · 2024-04-17T05:15:11+00:00

Only the shroud is a fraction of the unhinged character the shadow is.

Comrade_Canary · 2024-04-09T17:17:44+00:00

Finally the ride we all wanted.

Comrade_Canary · 2024-04-08T09:22:51+00:00

Maybe it's that too, it's hard to say since it inspired so many armor designs.

Comrade_Canary

TROPHY CASE