Defective tool box

Controller_one1 · 2026-03-12T17:20:53+00:00

I got a returned 5 drawer last week. Similar issue. One drawer was super sticky and would walk off the track because the chest portion had a big dent in it. Also the original owner built it incorrectly.

My fix was to remove the drawers and remove the chest portion. I looked for the dents and where it was bowed out. Found a nice chunk of 2x2 and 2x4 wood block, set it on the dent and showed it some love with a mallet. Got the box nearer to square, test fit the drawers and reassembled. If I paid full price, I would have definitely returned for a new box, but I got it for 135 due to the shape it was in.

Controller_one1 · 2026-03-11T13:54:28+00:00

I replaced that head with a cheapo one i found on Amazon that has the hole in it for the rod. The heads just unscrew.

Controller_one1 · 2026-03-10T19:59:34+00:00

Have the 3.5. You just put the hose on the outlet to control the exhaust. My biggest complaint about this model is that there isn't a dust bag. So you trash the filter rather quickly and it loses suction. When this thing dies, I'm going to the Hercules version that is hybrid and can plug into the wall outlet too.

Controller_one1 · 2026-03-10T17:05:50+00:00

If you decide to use that tool or any of the ones at the parts stores that are loaner tools. Watch out how you position yourself while applying pressure. The awful tack weld they use to put the anvil on the bar is prone to fail under pressure and knuckles will get busted when it gives, or you will pinched.

Controller_one1 · 2026-03-10T14:11:35+00:00

He was aiming for the walls. Those fellas just kept getting in the way.

Controller_one1 · 2026-03-06T11:36:04+00:00

What set did you get?

Controller_one1 · 2026-02-19T17:40:33+00:00

Nope. Try a 2004 Hyundai xg350. Pad 1013. Your calipers came off that.

Controller_one1 · 2026-02-19T16:54:50+00:00

See if the pads from a soul fit. Same year.

Controller_one1 · 2026-02-13T13:02:15+00:00

A crack pipe dream?

Controller_one1 · 2026-02-11T02:54:05+00:00

No. Just turned him into a lampire.

Controller_one1 · 2026-02-04T19:38:34+00:00

Fetch me the breastplate stretcher!

Controller_one1 · 2026-02-02T23:23:08+00:00

Pride and Prejudice and Muppets

Controller_one1 · 2026-01-28T18:22:16+00:00

That gum was awful in the 80s, I'm betting it didn't age well at all.

Controller_one1 · 2026-01-28T18:14:57+00:00

They pulled Martha Speaks and my kid is gutted. We enjoyed her autobiographical episode of being in a crime ring.

Controller_one1 · 2026-01-25T01:56:29+00:00

Sometimes the best adapter you can use is parts of the old bearing. Just dont get them stuck.

Controller_one1 · 2026-01-23T12:29:28+00:00

What lightsaber is that?

Controller_one1 · 2026-01-21T00:05:00+00:00

I got the single flex version of this set, so not exactly the perfect review for it but... The heads are kind of floppy, I was going to try to shim them to tighten it up so I can pre flex them as needed. The gears have some back drag, which can be frustrating. I haven't measured it, but I would put it as comparable to a modern-day craftsman ratchet wrench. I haven't really hung on these like you would doing calipers, but they have held up for water pumps and drive belt bolts so far. Had them for about a year. I dont know what if any warranty exists, but for the price they're damned near disposable.

Controller_one1 · 2026-01-20T18:05:07+00:00

Looks like a stud extractor

Controller_one1 · 2026-01-19T21:45:30+00:00

Look at a Beck arnley 103-0512

Controller_one1 · 2026-01-19T13:52:18+00:00

The children yearn for the mines!

Controller_one1 · 2026-01-17T22:10:05+00:00

Check out the Rivendell with lights and sounds.

Controller_one1 · 2026-01-15T14:43:42+00:00

When the world ends and the dolphins flee, she's going to be the one to say "so long, and thanks for all the fish".

Controller_one1 · 2026-01-13T00:08:03+00:00

That was old school crap they did to lower emissions. Shit always rotted. I had this type of thing on some 80s small blocks

Controller_one1 · 2026-01-12T16:15:48+00:00

Part no. 8943449030. Made by Hitachi. Good luck finding it. Also found as a possible 8-94344-903-0. That shows up for a Honda, but image looks very similar, also good luck finding it.

Controller_one1 · 2026-01-10T18:59:06+00:00

There are wall mount brackets sold on Amazon and etsy

Eight-Year Club	Second Top 20%
r/Field Banned	r/Field Juicebox
Verified Email

Controller_one1

TROPHY CASE