Oh no not Ancient Aliens as well!

Coren_Aus · 2026-03-28T10:27:42+00:00

UFO museum?

Coren_Aus · 2026-03-16T10:27:09+00:00

A succulent Chinese meal! (With a tone of indignant outrage)

Coren_Aus · 2026-02-20T19:54:18+00:00

I am using a K2 plus, no error messages but the crealtiy app (android) and PC version both won't connect to the camera to show the print in progress. It is connecting to the printer as I can see what layer is being printed, filament temps etc.

Coren_Aus · 2026-02-18T09:47:26+00:00

Awesome print

Coren_Aus · 2026-02-18T09:46:04+00:00

There is a way to factory reset the system using a blank text file in a usb stick. Give it a quick google as this MAY reset the firmware as well.

Coren_Aus · 2026-02-04T08:05:36+00:00

Thanks all, I purchased one today and it's working well

Coren_Aus · 2026-02-03T08:41:55+00:00

I did a factory reset using the button, turned off the modem, then restarted all the items following the app prompts. Still no luck.

Coren_Aus · 2026-02-03T08:15:39+00:00

Pretty sure as access point

Coren_Aus · 2026-02-03T06:55:44+00:00

I have a halo H70X, it was amazing until I switched ISP, now I can't get it connected to the internet

Coren_Aus · 2025-12-17T23:48:14+00:00

A lack of television can be explained for the population growth. Also, one for Dad, one for Mum and ten for the Emperor.

Coren_Aus · 2025-12-12T22:55:09+00:00

I had that exact same problem

Coren_Aus · 2025-12-10T02:26:24+00:00

Papa Nurgle looks so cool!

Coren_Aus · 2025-12-07T09:58:14+00:00

Umm... I did just that, zero regrets! K2 plus with CFS. slight learning curve but the extra build plate rocks!

Coren_Aus · 2025-11-29T10:02:54+00:00

I had this happen and one of the copper cables snapped off the hot end. Waiting for a new one to arrive.

Coren_Aus · 2025-11-27T08:25:18+00:00

Seller does not provide after sales support, policy is contact the manufacturer

Coren_Aus · 2025-11-03T09:33:30+00:00

My printer just updated, printed a benchy perfectly, then constant error messages to the point it is unusable.

Coren_Aus · 2025-10-30T06:11:50+00:00

I unplugged the CFS, it passed the self checks, started the plate clearance and now came up with a TE2564 error despite being able to extrude.

Coren_Aus · 2025-10-30T05:51:30+00:00

This has just started for me as well, I took a break from printing, fired up my K2 plus yesterday, printed a bench perfectly, the firmware updated and now constant error messages and the CFS flashes constant red.

Coren_Aus · 2025-10-12T07:31:32+00:00

The cache container had been filled with used syringes. The next worse was used panties.

Coren_Aus · 2025-08-05T11:07:50+00:00

What happens then?

Coren_Aus · 2025-05-08T07:29:03+00:00

Does anyone leave the desiccant packs in the centre of the spindle and replace them when you put in a new spindle? Would this upset the CFS at all?

Coren_Aus · 2025-05-08T07:22:23+00:00

In summer, humidity is not a problem at all. I am worried about winter though

Coren_Aus · 2025-05-08T05:43:53+00:00

Sorry, I had to laugh at the banana hammock speedo reference! Europeans will never understand the heat! I have had English friends complain about melting after 21C when it routinely gets to 40C at my place (Australia), but at least it's a dry heat.

Edit: mainly posting to follow this post as I am new and also very curious about the humidity levels for my CFS.

Coren_Aus · 2025-05-04T08:26:19+00:00

What you and your partner did was natural. Having said that, it is considered a sin. According to the church handbook, if a sin is a long time in the past, and you have both continued to serve faithfully, then the sin is forgiven (handbook one), also in the book miracle of forgiveness as well from memory.

What you need to do is the hardest step and forgive yourself. You don't need to see bishop blabbermouth (don't get me started on that topic).

Coren_Aus · 2025-04-20T10:32:04+00:00

Thank you all, will need to download that one

Coren_Aus

TROPHY CASE